My macbook have no sound under windows

ihave probleme my macbook has no sound do not know to do ask for help merci

And after the steps of running SETUP.exe update to Boot Camp 3.2.
Apple Support Boot Camp
- really helps to read through the guide etc.
You may still need the Cirrus audio drive as well afterwards.
MacBook Pro '10 Low Sound: Cirrus Logic CS4206A (AB 11)

Similar Messages

  • How to turn off volume adjustment sound under Windows 7

    Hey all,
    I'm running Windows7 x64 on an Intel iMac (July 2010 revision).
    Things are running well for the most part. However, I am unable to find a way to turn off the blooping sound played when adjusting the volume in Windows 7 (I know how to turn it off in OS X). I have tried turning off all system sounds under Windows,but the volume adjustment sound still plays. Does anyone know how to turn this off? I find it jarring. I would appreciate any help that anyone can give.
    Thanks.

    That too bad because I use the MBP to do my radio show and it's very annoying. I know you can turn it off on the mac side.

  • Macbook 15" Pro Retina under Windows 8.1 is constantly overheating because of lack of Iris Pro graphics driver

    This issue must have been raised many times already. The problem is that modern Macbook Pros under Windows are limited to NVidia graphics making Intel Iris Pro graphics unavailable. And Nvidia graphics in its turn produces pretty much heat, sometimes to the point when it "boils" on your lap.
    As an answer to this i heard that Windows is somehow limited (i honestly doubt this in regards to Windows 8.1) and doesn't support dual graphics and other stuff. Well, then give users an option to completely turn off NVidia graphics and use Iris Pro only. Is this possible?

    Unfortunately, there is no way to switch. It requires removal of the BC/Windows and re-installation in EFI mode. W7 has some challenges with EFI mode, but W8+ are much better. If you want to try the EFI method, then
    1. Backup Windows and all your files.
    2. Remove Windows using BCA (do not use any other tools) - Boot Camp: Remove Windows from your Mac
    3. Create a partition of the size you want the Windows to be, using Disk Utility. This should be a Free Space partition.
    4. Use the Windows Installer and choose EFI boot from the USB built using BCA.
    5. Install Windows. The Free Space partition will be split into a 128MB MSR and the remainder as MS Data which will become NTFS during the Windows installation.

  • I have two accounts under Windows 7, how do I keep my Firefox history from crossing over?

    On one account, I choose the option of never saving browser history. On the other, to always save. When I go under the one that saves history, my browsing history of the other separate account shows up. I don't want that. Is there a way I can adjust the settings to make sure these two firefoxes stay independant of each other?

    The ''sessionstore.js'' file in your profile folder stores your currently open tabs and windows. You can create a backup copy of this file and place it in your new Firefox profile.
    * [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
    To be extra-safe, it's a good idea to right-click a tab and choose '''Bookmark All Tabs''', then create a backup copy of your bookmarks for safekeeping.
    * [[Restore bookmarks from backup or move them to another computer]]

  • MacBook - Corrupt graphics (shadows under windows)

    Hi all,
    My MacBook is displaying some weird graphics artefacts around windows and menues. It corrects itself if I restart the computer, but shows up after sleep.
    Here is a screenshot of the edge of the Safari window:
    http://www.damsleth.com/macbookdisplay.png

    Same problem with a Macbook 2.0. This seems to occur also with Intel Mac Minis:
    Intel Mac Mini: Window Shadow Effect ... (Apple Discussions)
    Graphical Glitches on Shiney New Duo mini (Ars Technica Forums)
    Macbook 2.0/ Macbook Pro 1.83   Mac OS X (10.4.6)  

  • Enabling EAX tm for Sound Blaster ZS under windows 7

    My sound card used to have EAX support under windows xp 32-bit, thus I could enjoy that choice of noise within video games. Now the options in video games tell me that I don't have that EAX capability. I'm rocking windows 7 32-bit and don't know what to do for this [email protected]

    You install Alchemy yet for those DirectSound3D games yet? Even better use this,
    http://forums.creative.com/t5/Sound-...009/td-p/53838
    and get Alchemy as well as quite a few of the apps that used to work in XP. And in case you haven't heard of Alchemy,
    http://connect.creativelabs.com/alchemy/default.aspx

  • No sound on Windows 7 Boot Camp

    I've had this problem for a while now, I just ignored it in the past, now I'm really fed up. I've tried everything, downloading Realteck, burning BootCamp drivers onto the CD (I have a Lion which came with no disc), I tried playing around with the Sound in Control Pannel. Someone please help me!

    Then google for Cirrus Logic Audio for Mac running Windows.
    Something like this...
    MacBook Pro audio sound fix 
    http://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
    Cirrus Logic CS4206A (AB 11)
    I tried downloading the "High Definition Codecs" driver from Cirrus Logic's website but the download link doesn't work.
    http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-30.zip
    *MacBook Pro No Sound in Windows 7*
    Posted by Geek on +Jul 23rd, 2010+
    * You are running Vista or Windows 7 on a Macbook
    * You have no or low audio/ sound. In macbook pro, you may also see a red light in your audio jack.
    *Step 1:* Download the Macbook Pro Cirrus Logic CS4206A Driver from our server.
    +(As a request, please do not hotlink this file anywhere else or our server will automatically remove the file from server.)+
    +In case the above download link does not work google+ CirrusAudio.10.6.1.zip
    *Step 2:* Extract the right type of Driver
    (depending on your windows XP/ 7/ 32 bit/ 64bit)
    Step3: for Windows 7 only: Right Click on exe file of driver.
    Select Properties> Compatibility > run in compatibility mode
    Select Windows Vista from drop down menu and Click OK
    *Step 4:* Double click the driver and install.

  • No sound in Windows 7 Pro

    Hi,
    I installed windows 7 pro to my 2011 imac but I cannot install the IDT Sigma Tel driver. I have no sound in Windows 7 but sound drivers seems to be installed. I tried all possible ways to fix it but there is no solution so far. Can you help me with that?

    And still no one wants to provide a solution for this. Great work Apple, you are very helpful !!!!

  • Website viewing issue with Firefox 3.6 under Windows 7

    I use java script to list current headlines on my website userfriendlypc.net under, "In The News". The website has always looked good under Firefox, IE, Safari, Opera and Google Chrome. Since migrating to Windows 7, Firefox, only Firefox makes the text link in this area look like crap after the first link. The text changes to a greenish color and the hovered link seems offset making it look really bad. This only occurs in Firefox and only under Windows 7. I have tested this under Windows 7 with a basic install of Firefox and under XP. No add-ins or anything else was added when it occurred on the test machine.

    I thought the ClearType configuration would fix the problem as it seemed to clear it up once ClearType was disabled however doing this made other things look like crap. I tried every combination available and this did not fix the problem. I was able to fix the problem however by eliminating the fade function from the javascript on the web page. The "In The NEWS" section still functions properly, just without fading the article titles in and out. A compromise I can live with. Thanks all for your help and hopefully, we won't run into any further problems.
    Steve

  • No sound under Vista on Satelite U300 - waranty question?

    Hi
    I have some big problems with sound. I tried a lot of solution, but nothing. So, this is the problem...I have no sound under Vista.
    1. Sound (volume) icon showing, that "no audio output device is installed".
    2. I checked System tolls-system information, under _Components - Sound device_ - nothing, no info. _Components - problem devices_ - also nothing. No problem device at all.
    3. In device manager - hardware with Sound, video and game controllers - missing. Even then Im checking all other devices, such System devices, or unknown device, it's also nothing. No devices even with yellow question mark. Its seemed like systems run ok.
    Very Strange.
    Of course u can say, maybe I didn't install sound drivers, but drivers are installed. Download a newest driver from Realtek.
    But...sometimes, I have sound. Usually sound is missing. Such thing like restart doesn't help.
    One more thing, then I have sound (sometimes it happens), the sound can disappear during my work with computer.
    Maybe it's warranty question? I should go to repair centre?

    I tried to install Vista using recovery image about 10 times. It doesn't help. Even after that it shows me same mesage. Download newest drivers from realtek, and still nothing. The main thing, that confusing me, it is device manager. No sound hardware at all. It's seems like everything working ok. Even system information show that i dont have installed sound.

  • TS3274 The sound effect window is stuck on screen and volumn button not working

    I have the Sound effect window stuck on my screen and the volumn butoon wont work.

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. been told I need to purchase paralellDestop 6, Windows & Microsoft 2008licence?

    Hello, I have a Macbook pro which runs under 10.5.8. I want to use a PC interface. I've been told I need to purchase paralell Destop 6, Windows licence and Microsoft Office 2008 for PC. Is that correct ?

    If you have a MacBook Pro with 10.5, that's usually a machine that's getting long in the tooth and thus running Windows as a virtual machine (one OS inside another) will likely be slow.
    Also spending all that money for Windows (VirtualBox is free) and Office seems like almost a waste of effort if the machine is going to die suddenly.
    MacBook Pro's last about 4-5 years.
    To do what you want your going to have to upgrade OS X to 10.6, then either buy VMFusion or Parallels which they are now catering to 10.7 and 10.8 users, so it's slow on 10.6, or use the free VirtualBox which will run well on 10.6. Then buy a copy of Windows 7 as earlier Windows versions are not being sold, then Office 11 or whatever.
    You can also install OfficeMac into 10.6, if they still sell a copy.
    You see your outdated really, and anything that can work is soon to be ignored etc.
    What I would consider doing instead, since your not a OS upgrade type of person (we are on 10.8 now which won't run on your machine or be extremely slow) is to buy yourself a decent Windows 7 laptop and install Office into that. Some have the demo already inside and all you have to do is activate it.
    This way you get your Windows experience and Office experience, don't have to fiddle with complicated virtual machine software, or Apple's problematic Bootcamp etc as Apple really is leaving 10.5 and 10.6 users behind, and by next summer will be leaving 10.7 users behind too.
    Windows 7 laptop will be the cheapest and least stressful option for you, you can continue to use the Mac until it drops dead of course.
    I say this because your on 10.5, your like most computer users, just a computer user and not a geek.
    You obviously have some reason you need Office, likely for a job or school and since 99% use Windows and Office, then that's what you should be using.
    If your only needing Office or Office like program for something temporary, then I suggest you install the free LibreOffice into OS X, however I don't know if it will run in 10.5, you might have to upgrade to 10.6 via the 10.6.3 white retail disk, however Apple doesn't sell it anymore, but perhaps Amazon or elsewhere does.
    Sorry, you have been out of the upgrade loop for quite some time, so a new machine is in order as that one is about to die soon, so I wouldn't be spending too much on it really.
    If you have a fat wallet you can buy a new Mac with 10.8, and have Windows 7 installed in BootCamp (direct boot) and also into VMFusion or Parallels (copies the Bootcamp Windows so you can use both) and Office for you. It will come all set up, enter your password and use the machine.
    I think OtherWorld Computing will sell you a pre-configured Mac all set up like that for you, Apple won't do it though.
    You can also pay a local PC/Mac specialist to do the same.
    Don't forget setting up a backup system for both Windows and OS X, add anti-malware software in Windows, you'll need that.
    IMO a new Windows 7 laptop would be the cheaper, less stressful option, Learning Bootcamp and virtual machine software can be a pain if your not computer savvy, al;so Apple has a nasty habit of upgrading the operating system constantly, now on a annual basis. You don't upgrade and all your third party software, then your denied security updates in short order. Windows 7 laptop will last a decade on the same version, only needing simple updates, not upgrades.
    If you want your Windows machine to last even longer, like a decade, then get a desktop tower instead of a laptop.
    Mac's are for those who can handle a lot of change, as Apple is about always inflicting change.  It's costly change too.
    Good Luck
    Windows in BootCamp or Virtual Machine?
    Things to consider before upgrading OS X

  • MacBook Pro sound issues under Windows 7

    Gentlemen.
    I have been having a couple of problems with the sound input/output on my MBP under Windows 7
    I have noticed that the volume levels that I get under Windows 7 on my MBP are much lower than what I get on OS X, making it hard to hear what is occurring in game without the use of headphones.
    Also, the microphone does not seem to work under Windows 7, it is seen as being there and enabled, but does not pick up sound, again, this is not an issue in OS X.
    I have managed to fix the mic once before, but since I re-imaged Windows 7 on the computer I cannot remember how I managed it.
    Has anyone else come across this? and more importantly, anyone got a fix for it?

    Daigohgoh wrote:
    Or try VM Ware 3? I hear it runs Win 7 better than VMW2? (at least until the drivers for Win 7 comes out for Mac)
    I agree. In fact, I have been using VM Ware Fusion 3 for Windows 7 too. Having tried Parallels Desktop 5, I can tell you that VM Ware Fusion 3 is much better. I have found Fusion to be so much cleaner on my system. Parallels Desktop 5 feels like it has been butchered together. This has just been my own experience.
    Good luck!

  • I have no sound coming from my MacBook which is 3 years old.  I have checked the sound setting under preferences.  Any suggestions beyond going to the Apple store?

    I have no sound coming out of my MacBook and I have checked the sound settings in preferences.  Any other idea?  Thanks.

    can you hear sound using headphones?

  • Better Display Driver under Windows 8 than Windows 7 for MacBook Pro Retina?

    Anyone happen to know if the display support for a MacBook Pro Retina is better under Windows 8 than it is under Windows 7?
    Ideally, I would like to be able to run 2880x1800 at True Color as well as have the HDMI out fuction as a second display (maching the behaviour while booted under Max OS X 10.8).
    Under Windows 7, the highest resolution that supports True Color is 1600x1200.  This would be okay if that setting did not distort the picture (everything is slightly squeezed).  At 2880x1800, the highest color depth is High Color (16-bit) which is, well, not something one can actually use if doing graphics work.  On my 27" iMac, 2680x1600 supports True Color as expected.
    Also under Windows 7, the display connected via HDMI is not recognized.
    I've contected both Apple care support and Microsoft support about this, but Apple referred me to Microsoft and Microsoft referrred me back to Apple.
    Thanks,
    Warren
    P.S. Personally, I think it's rediculous to even attempt to do graphics work under Windows, but tell that to the Windwows based corporate world that I freelance in.

    Yes, there is a better display driver for the MacBook Pro Retina while running Windows 7 Pro.
    And, the answer is so obvious, that I feel a little silly having started this thread in the first place!
    The Windows 7 Professional NVIDIA drivers for the NVIDIA GeForce GT 650M card need to be installed manually by downloading them from NVIDIA directly.
    If you need to do this on your MBPr Boot Camp volume, use this link:
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    Then, set the pop-up menus based on your MBPr. [Mine were as follows: GeForce; GeForce 600M Series (Notbooks); GeForce GT 650M; Windows 7 64-bit: English (US)]
    What tipped me off to this is that the CUDA drivers need to be downloaded manually on the Mac OS X side to take full advantage of raytracing in Adobe After Effects CS6 and CC.  As soon as I started to run that installer it dawned on me, "Hey, you probably need to install the drivers on the Boot Camp side as well."  And sure enough after doing so, I am able select all of the expected resolutions as well as run 2880 x 1800 at Millions of Colors (32-bit).
    I guess I'm showing my nearly three decades worth of being a Mac user where I'm accustomed to having about everything needed included with the OS.
    -Warren

Maybe you are looking for

  • Calendar app is missing. How do I get it back?

    I must have accidentally deleted my calendar app. I can search for calendar app and find it but I can't find the app and when I plug into iTunes it isn't an app in the list of apps to sync. How do I get the app back on my home screen?

  • Upgrade to IOS 5 I can´t make a conference call

    Please help me, I can´t make a conference call since i upgrade to IOS 5

  • Trouble installing Cisco Connect for E4200

    I just got a new E4200 router and downloaded Cisco Connect from the web site...file name CiscoConnect.E4200.1.4.11160.2.exe. When I try to run it, I find through Task Manager that Setup.exe is using about 35 to 40% CPU, but I'm never even getting to

  • Need help @ listening combo box

    Hi Everyone, below is my code. Please find my question between '?'ed lines. // CREATE COMBO BOX if(obj.equals(CSV_COMBO_BOX))      _combobox[_combobox_count] = new JComboBox();      //get possible value for combo box      String [] possible_values =

  • Function based indexing v8.1.7 not working

    I have created a function based index on a column and when I run my query although I get the correct results I seem to be doing a full table scan instead of using the index. Are there any known bugs or additional parameter setting for function based