My Macbook is automatically typing backslash key.

My Mabook is automatically typing backslash key.
This is happening even on the login screen. Which is making it very difficult to use.
Key is definetly not stuck.
Has anyone faced this problem before? I am using late 2008 MacBook with OS X Lion.
Regards,
Mangesh

You have the MacBookPro6,2, the Edsel of Macs. It has a defective logic board that may be covered by this recall program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers do not detect the fault. There is a specific test for this issue.
Print the first page of the panic report, and the support page linked above, and bring them with you.
Note that the recall only applies within three years of purchase. After that, Apple may refuse the service. In that case, you may be quoted a price of about $300 (in the U.S.) for a "depot repair," which involves shipping the unit to a central repair facility and takes about two weeks. For that flat fee, anything found wrong with it should be fixed, not just the logic board.
The model was discontinued in February 2011, so the replacement program will be ending soon. Some units may have been sold by Apple as refurbished after that date.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Sometimes the replacement part is also defective, so be prepared for that possibility.
If it's too late for your unit to be repaired under the program, and you don't want to pay for a new logic board, you may be able to stop the panics by disabling automatic graphics switching.
*An SSD doesn't need to be zeroed.

Similar Messages

  • Every time i press enter, my keyboard keeps typing backslash even though i am not holding the backslash key

    Every time i press enter, my keyboard keeps typing backslash even though i am not holding the backslash key. Help.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Will playing excessive need for speed  games on my macbook pro damage the arrow keys(i play using them) ??

    hey guyz i wanted to ask whether playing excessive (1-2 hours daily) need for speed carbon on my macbook pro using the arrow keys to control the car damage the arrow keys of the MBP??
    pls answer asap i am worried..

    I don't think that you have to worry about arrow keys because they won't damage with their use (unless you hit heavily these keys). Using games, there are other things to worry, as the temperature of the Mac, but fans will turn on automatically when your Mac needs

  • My macbook pro automatically goes into safe mode and doesn't start. I use mavericks.  what to do? ?

    my macbook pro automatically goes into safe mode and doesn't start. I use mavericks. What to do??

    Can you boot into your Recovery partition (hold down the command and R keys whilst booting)?
    Call back - you'll be able to connect to this forum from Safari whilst in Recovery.
    Clinton

  • ORA-28374: typed master key not found in wallet (no ORACLE.SECURITY.TS.ENCR

    Good afternoon! I have a problem with creating a wallet for TDE.
    Oracle Version 11.2.0.2.0.
    SQLNET.ORA is :
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    ADR_BASE = /app/oracle
    # TO SWITCH OFF ORACLE ADR FEATURE
    # DIAG_ADR_ENABLED=off
    DIAG_SIGHANDLER_ENABLED=FALSE
    DIAG_RESTRICTED=TRUE
    TRACE_LEVEL_SERVER=admin
    TRACE_LEVEL_CLIENT=admin
    TRACE_DIRECTORY_SERVER=/app/oracle/product/11.2.0/db_1/network/log
    TRACE_DIRECTORY_CLIENT=/app/oracle/product/11.2.0/db_1/network/log
    TRACE_FILE_CLIENT=cli
    TRACE_FILE_SERVER=srv
    TRACE_UNIQUE_CLIENT=off
    SQLNET.EXPIRE_TIME = 10
    SQLNET.INBOUND_CONNECT_TIMEOUT = 20
    SQLNET.ENCRYPTION_SERVER = REQUESTED
    SQLNET.ENCRYPTION_CLIENT = REQUESTED
    SQLNET.CRYPTO_SEED = 'KakdlkLAKMXM0000sdsdsadadeffdmsdmdkmdv'
    SQLNET.ENCRYPTION_TYPES_SERVER= (AES256,RC4_256,3DES112,DES)
    SQLNET.CRYPTO_CHECKSUM_SERVER = REQUESTED
    SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER = (SHA1,MD5)
    ENCRYPTION_WALLET_LOCATION =
    (SOURCE=
    (METHOD=file)
    (METHOD_DATA=
    (DIRECTORY=/app/oracle/admin/orcl/wallet)
    I've creted wallet by command :
    alter system set encryption key identified by "sdsdsdsds";
    After that i can close and reopen this wallet , it's ok. But i can't create crypted tablaspace :
    CREATE TABLESPACE RMD DATAFILE '/oradata/orcl/TDE.dbf' SIZE 600M
    AUTOEXTEND ON NEXT 100M MAXSIZE 2000M
    EXTENT MANAGEMENT LOCAL UNIFORM SIZE 64K ENCRYPTION USING 'AES256' DEFAULT STORAGE (ENCRYPT);
    i've got an error ORA-28374: typed master key not found in wallet
    My wallet looks like :
    Requested Certificates:
    Subject: CN=oracle
    User Certificates:
    Oracle Secret Store entries:
    ORACLE.SECURITY.DB.ENCRYPTION.ASSSDSeFDX08Evy6Mco2yhXsAsdsdsdsdsdefdfdfdfddfddfdfdfAAAA
    ORACLE.SECURITY.DB.ENCRYPTION.MASTERKEY
    Trusted Certificates:
    As i uderstood there should be also entry like ORACLE.SECURITY.TS.ENCRYPTION. But why this didn't created into wallet by command : alter system set encryption key identified by "sdsdsdsds" ?
    Thanks!
    Edited by: user5819915 on 13-Jan-2012 03:25

    Hi there,
    first, "SQLNET.CRYPTO_SEED = 'KakdlkLAKMXM0000sdsdsadadeffdmsdmdkmdv" is no longer needed, the DB creates a seed itself and ignores this string.
    Then, on to TDE ...: These things happen if you had a wallet before, and that wallet was deleted; now if you create a new wallet, the TS MK is missing. Looks like you didn't encrypt any data yet. You might see if you get https://updates.oracle.com/download/8682102.html for your DB version; apply the patch, decrypt all data, cycle through all log files and then create a new wallet. That might work, but I can't promise.
    Peter

  • I'm in need of a rubberized case for a late 2007 macbook pro 15.4 silver keys help please

    please help me out I'm in need of a rubberized case for a late 2007 macbook pro 15.4 (silver keys) cd in front.  Please help me out.  here is my personal email: *****@gmail.com I also have just purchased a 2006 macbook pro 17 inch and would like a case for that one too if anyone can help I would greatly appreciate it. 
    again here is my email:  ******@gmail.com
    thank you
    john
    <Edited by Host>

    John, please refrain from posting your personal email in these threads.  It is not necesary and all communication to you can be done directly in these forums.  Posting your email address can open up you to tons of unwanted spam, among other things.  Really all you can do is search the internet for them.  My suggestion would be to google "case for late 2007 macbook pro".
    One will probably be very hard to find for a 6 year old model as it is on the borderline of being considered "vintage".  Ebay may be a good place to try too.

  • How to change or Switch - scroll direction - automatic using registry keys

    how to change or Switch - scroll direction on TouchPad Synaptics - automatic using registry keys   ?

    Hi jrv
    How to explicitly take ownership of the subkey?
    System.Security.AccessControl.InheritanceFlags 
    I try use value
    "ContainerInherit、ObjectInherit、None", and It only take permission in root key.

  • I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.

    I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.

    Here's the Apple Support article on Target Mode http://support.apple.com/kb/HT1661

  • I want to know if the Macbook Pro with the ash key board and as the cd rom infront is more recent than the one with the black key board and as the cd rom on the side.

    I want to know if the Macbook Pro with the ash key board and as the cd rom infront is more recent than the one with the black key board and as the cd rom on the side.

    Hi Tracy,
    I'm guessing "ash" is the silver colored keyboard, the same color as the rest of the MBP? If so, that machine, with the optical drive slot on the front, is the older machine.

  • I had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    i had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    Hey ynareshbabu,
    Thanks for the question. I understand you are having issues with your keyboard. The following article provides some great troubleshooting steps:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/TS1381
    You may want to refer to the "Some keys don't work as expected" section.
    Thanks,
    Matt M.

  • Is there a way to access the passcode previously entered to access a wi-fi network that the MacBook Pro automatically remembers and stores?

    Is there a way to access the passcode previously entered to access a wi-fi network that the MacBook Pro automatically remembers and stores?

    You can view stored passwords in Keychain Access in the utilities folder in Applications.

  • During typing sporadically keys do not respond immediately.

    Sometimes (not constant) when typing, the key does not respond immediately. If I wait 15-30 sec. Then it responds as we'll as additional keys I may have tapped. Also when attempting to save an email to a specific folder, I tap the "save" icon then in the left when I tap on the specific email account to get to th specific folder, the iPad 4 freezes momentarily and after a few seconds (5-15) it decides to continue. This doesn't happen all the time only intermittently.

    Hi, and welcome to the Palm Community Forums.
    It seems likely that your digitizer (which is the top portion of the screren which recognizes your stylus taps and converts them into commands) is failing, although there are things that you can try to diagnose it.  One thing is to remove any screen protector you have installed, and see if the behavior continues.  The second is to fold over the corner of a piece of paper  and use the folded edge as a "scoop" by sliding it underneath the frame that goes around the screen.  The idea is to pull out any dirt or grit that has accumulated under there over time, which can interfere with the digitizer's function.
    If that does not remedy the problem, you can try one of several software fixes such as DigiFix which can help in some cases.
    If none of that works, you might just be in need of a replacement digitizer.  They can be found at www.pdaparts.com or www.usedpdaparts.com and you can either do the repair yourself, or they will do it for you at a reasonable cost.
    All of these solutions, and more, are discussed in this lengthy thread in the Hardware board.
    Good luck.
    Post relates to: None
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • How can we automate the Depreciation keys based on production for business

    How can we automate the Depreciation keys based on production for business u2013 this is currently not an optimised process if we expect business to manually change the keyu2019s on a monthly basis.
    The end user updates the table, transaction AO25, manually on month end after the production calculations are completed. The question is, is it possible when the PP is completed, that the system updates the Period Unit table for that period?
    Thanks.
    Regards,
    PS PS

    Hi,
    I am new at this, so I need a explanation on how will this help me, and how do I get about doing this?
    Thanks a lot.
    Regards,
    PS PS

  • Backslash key stopped working

    My backslash key stopped working a couple of weeks ago. Until I get it fixxed, is there a way to remap some other key to this character, as least for using vim in Terminal.app?
    Thanks. I feel that I should know how to do this, but I haven't the foggiest notion of where to start.
    Mark T

    Hi Yepix,
    Boot the system into safe mode and check for the issue, also check in onscreen keyboard if it works. If still the same issue it might be issue with the keyboard hence suggest you to visit the nearest authorised service centre.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.      
    Best regards,                                                                                                                              
    Ashwin. S

  • I have a macbook and when typing in my password the keyboards just beeps

    I have a macbook and when typing in my password the keyboard just beeps

    Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
    If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
    Good luck & happy computing!

Maybe you are looking for