My macbook is completely crazy! (NEED HELP!!!)

I am honestly frustrated and confused! I have a late 2011 macbook pro, (got it in August) 15", 8gb of ram, and an ugraded 750gb HDD. This morning it was working perfectly normal, then I take it to school and at school it was all messed up and now it is messed up as well!
So this is what happens. I boot up the computer, takes a considerable amount of time... then my mac loads normally, and it seems all good. Then when I click something it goes crazy! What I mean by that is, the dock first disappears for about half a second, then reappears. Then it disappears and then the desktop background becomes gray with all the icons on the side (like windows the shortcuts on the actual desktop, not dock) are still there, and it flickers or more flashes then what happens and then what happens after 20 minutes or so the screen goes gray and shows the loading icon and thats it (plus the fan is going like crazy! For a while it wouldn't even start! I tried to boot it up in safe mode but it would go almost half way and then just shut down! Then i did the option + command + P + R and that brought me to disk utlility for a couple of times the verify didn't work, and stopped half way through, and the repair, but I kept on doing it and it said it's all good! So i reboot and same problem! Now I can't go back to that disk utility and when I started my mac again it does the flickery thing, then the gray screen but this time it loads and then it flickers an image of a desktop and goes straight to the screensaver... and I can't do anything about it, it's frozen on the screen saver! The screen saver doens't lag however, it acts normally! But if I click anything it sticks on the screen saver! I think the problem is the HDD, but I don't know! Can anyone help me?! Please!!!!!

My first thought was the hard drive and OS has a built in Sudden Motion Sensor whcih will stop the hard drive heads from crashing into the platters when the computer is moved suddenly. This does work most of the time and could cause some of the tings you are seeing.
But then after reading more of your first post it seems your system and drive is doing some very strange things.
It would be best to first take it into an Apple Genius Bar and have it looked at. They can run tests on it and since it is still in the original 1 year warranty this should not cost you anything even if something needs to be replaced.
You can also run the Apple Hardware Test on it your self by connecting it to the Net by Ethernet cable and booting holding down the d key or the Command+d keys. That will boot the computer from the Apple internet servers and load the AHT.
Good Luck.

Similar Messages

Transferring Contacts from iPhone 3g to a new Macbook Pro...need help:-)

Transferring Contacts from iPhone 3g to a new Macbook Pro...need help:-)

Not possible, the current version of iTunes only allows syncing via iCloud which the 3G does not support.

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

MacBook Pro smell and need help deciding on which MacBook Pro to buy

So I bought a 17-inch MacBook Pro from my brother in August of 2009. He bought it in March of 2008. A couple days ago I noticed that my MacBook Pro has been releasing a really bad smell almost as if burning plastic. But the smell isn't that bad. What could be wrong with my MacBook Pro? I'm getting a New 15 or 13-inch MacBook Pro in June so idk if I should just not worry about it? And I need help deciding if I should get a high end 13-inch MacBook Pro or a low end 15-inch MacBook Pro?

What could be wrong with my MacBook Pro?
Take your computer to an Apple Store. The staff will be able to check as to the cause of the smell.
I'm getting a New 15 or 13-inch MacBook Pro in June so idk if I should just not worry about it? And I need help deciding if I should get a high end 13-inch MacBook Pro or a low end 15-inch MacBook Pro?
Why not ask in the MacBook Pro (Late 2008 and 2009) forum area?

Flash Player is causing my Web Pages to flash like crazy Need help!

I need help, I'm running a computer with Windows 98 4.10.1998
and Running Internet Explorer ver. 6.0.2800.1106IC
I had some problems I have fix eveything but when I got to a
web page it wants
to install and run flash player if I do Install and run, all
my web pages flash
like crazy every clickable icon or line flash the screen
makes it flicker so hard
it is enough to give you a headache. Ad boxes on the pages
flash like a lighting
strorm. How do I fix this? I never had this before, I ran the
flash player debug file
that made no change. Help!

Already checked the Event Viewer. The only thing I could find is this critical level event
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
This only happens when I am running a flash video in IE10. In Chrome everything works fine. I downgraded flash player to 11.4 but with no luck.
From the event viewer, the reboots started from sometime in september.(this is my parents' pc)
I think I found the problem. I changed my video card, a 9600GT, a few months ago with a GT630. I switched back to the 9600GT, and it looks like the issue is not happening any more. But it's still verry ackward for the issue to happen only on IE10.
I'm still testing to be sure that the video card is the problem.

When I tried to download app, the answer was "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms". My computer is a MacBook Pro. I need help.

When I tried to download CC app, the answer was "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms". My computer is a MacBook Pro, running Mac OS X, version 10.6.8. I need help.

Hi Younghee,
You may also refer to the help document below to know more about the technical specifications:
System requirements | Photoshop
Regards,
Sheena

Day one of my new MacBook Pro & I desparately need help with calendar and email

It's day one of my new relationship with a Mac, and I need help! I'd like to use microsoft exchange to sync my calendars to iCal & my emails the way I currently do with my iPhone 4 and iPad 2. The problem is that all I get are error messages. They either say that communication with the server cannot be established or communication to ports 80 & 440 cannot be established. One account I'd an ssl and the others are gmail. Please advise!

anyone? please? i would appreciate any information.

Transferring iPhoto albums from old macBook Pro to new - need help!

I am using the firewire to firewire connection to create a disk of my old computer on the desktop of my new computer. It is imperative that I transfer my iPhoto data from my old laptop to my new one with all the labels and albums / folders intact. I have 4 years of photographic microscope data from patient laboratory tests on my old hard drive. These folders are labeled with the patient identifiers and the date of test as well as the diagnosis. I need to have these data on my new computer so I can pull up archived photos to compare new results with past ones. However, when I go to transfer the photos from the old computer the images are only available as "raw" data - that is, I cannot access them as they are arranged in my old computer: folders that have albums by date, subject and lab test. The only images that I can access are what is seen when they are originally imported from the camera (e.g. dsc-0001, etc - not my labels, or my tags, my albums or folders: not "Ms Smith, 12-21-06; positive", etc).
Is there a way that I can import my photos from the old computer into the new one and keep my folders, albums, tags, labels, etc? Or are these data destined to be lost to the archives?
Any help is gratefully appreciated

You should be able to copy your iPhoto library directly to the new computer. It's /Home/Pictures/iPhoto Library. Drag it to the same location on your new computer. Also copy /Home/Library/Preferences/com.apple.iphoto.plist.
Or make things simple and user Migration Assistant on the new computer to migrate your user accounts, third-party applications and support files, and network preferences.
If you have a Time Machine backup you can restore from your TM backup.
Migration Assistant tips and tricks
How to use Migration Assistant to transfer files from another Mac
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009
Message was edited by: Kappy

Complete novice needs help

Hi folks
I hope you can indulge me. I am a mature student studying with the Open University in the UK. In order to complete my degree I have to produce a (small) project (doesn't have to have full functionality) based on a Network application. I am limited to using Java and to some extent the software provided for me, which in this case is JBuilder3.5 (yes I know it's old!). I can, within reason download further software providing my tutor is ok with it but here's the rub I have no idea what I actually need. There is so much to read through and I am feeling a bit thick because I cannot pin anything down.
This is where I would appreciate any help from you experts. My project subject is a browser which can interpret web pages and then configure them to be displayed in a fromat that is prefered by the user not the author. I can build the GUI but I am stuck when it comes to building the functionality behind it. ie what packages do I need to download that can recognise XML/HTML tags in order to rearrange the display? Am I even on the right track? Is it actaully possible?
Because the project is only worked over a small period I don't need full functionality but have elected to deal with input/output fields, text placemnt/display/font (infromationl), graphic placement/deletion. I may also be alowed to update my version of Jbuilder.
I would be so grateful if somebody could at least point me in the right direction. I need to add here that I feel so stupid that I need replies in very plain english :o)
Wanda

Hi ddossot
Saw your note about using a proper IDE unfortunately I am obliged to use the one provided by my UNI. Reason being the markers of my project may not be up to date with other IDE's. Though I may be allowed to use a newer version of JBuilder. I am waiting to hear if I have permission to do so.
Here's another thick question. from what I remember, when studying Java last year, it has a number of libraries that can be imported to a project. When I download the HTML and XML stuff are they just added to the libraries already in place and if so how is it done.
ps hope they also have tutorials with them for the coding :o(
One last question; am I in the right forum for this sort of query or is there a novice one for thicko's like me? :o)
Wanda

Complete novice needs help getting SQL Query into Crystal Reports XI

Post Author: MissMarnie
CA Forum: Data Connectivity and SQL
So I was given an intro level web course and a monster reference guide in prep to format a report. One of our developers wrote me everything I need for the report into a SQL Query and now I'm supposed to format it in CR XII literally do not know what to do from here. I'm able to set up the correct server as a datasource, if that's useful, but I don't know how to make the querey into a bunch of formattable fields in CR. If anyone can walk me through this, I'd be so grateful. I've attempted to look up SQL query in both the help and the book but I keep hitting a wall. The help dialog says things like "press this button" with no reference to what "this button" is. I'm sure it's obvious to the knowledgeable but I'm in a complete fog. Thanks in advance

Post Author: synapsevampire
CA Forum: Data Connectivity and SQL
IF you're trying to get assistance with setting up a query as the source for a report, try posting your Crystal version and the database type.
Different software works differently.
In CR 9 and above, under the connection to the database you'll see Add Command. Select that and you can paste the query in.
As for not knowing how to generate a report, that requires experience, there's no generic solution of course..
-k

Complete beginnner needs help...

As a complete Flash beginner, I have a project I am trying to
make but I am unsure how to acheive it...
I want to to have 3 x 3 Frame Keyframe animations (very
simple) with a title keyframe in between each one. What I am
struggling with is that instead of repeating the keyframes lots of
times and having a huge project I want to repeat each 2 Keyframe
animation 30 times (making it a minute long) before moving onto the
text keyframe and then the next 2 keyframe animation to loop 30
times before moving on... I then want the whole thing to loop.
What code do you use in Flash CS3 (ActionScrpit 3.0) to
acheive this for each set of keyframes? To keep it simple they are
all one one layer. Any help would be gratefully recieved- thinking
this was a simple question I have been searching on here for ages
and cannot find anything that works... but I think its more do with
my lack of knowledge rather than lack of information...

I think I may have made my previous post more convoluted than
it needed to be :)
I just want to know what code to use to make a group of
keyframes repeat a certain number of times then carry on with the
rest of the movie..
Any tips in Actionscript 3 (or 2!) would be gratefully
appreciated!

Transferring files from macbook to imac. Need Help !!!!

Okay i will make this as short as possible. I was using a macbook to do imovie. My father bought a new 27 inch imac. Well I got his 24" imac. Stoked and boy what a difference !! On the old one I used an external hard drive and woking and saving off of that. When I got my new imac, I bought a new external hard drive. First I plugged in my old one to new imac. Transferred movies over. Then plugged in new external hard drive to imac, and put movies on there. I am a videographer for a few surf teams and I was working on a movie and noticed that some sessions were not on there. So I plugged in old external hard drive to macbook and there they were. turned both machines off unplugged both external hard drive. Plugged old external hard drive into imac and they were not there. I am using ilife 11 and am on 10.6.5. Sorry it was so long, just wanted to give all my info to make it easier to answer. Thank you so much for taking the time to read this whether you answer or not, much appreciated.

Really strange.
I suggest perhaps attaching the old ext HDD to the MB and the new ext HDD to the iMac and connecting the two Macs with an ordinary ethernet cable. Go to Finder/Help menu/Mac Help/Index/E/Ethernet for an article about making a network with two Macs and an ethernet cable. Then go to Index/S/Sharing to find out how to configure your two Macs to share files with each other.
With the network and sharing hopefully you can now see the files that you need on the MB/old HDD and can drag & drop them to the new iMac/new HDD.
Dah•veed

I cannot play the avi video file on my macbook!!! Need help please

hi there
i have a macbook and it plays other avi video file but i recently downloaded this video off of utorrent and when i play on it, it says quicktime couldnt recognize this video and suggests me and takes me to another link. I have already downloaded Perian, what else can i do about it? I need some help, thank you.

See if VLC will work (it should)....
http://www.macupdate.com/app/mac/5758/vlc-media-player
....go to the developers web site and check all the file formats that it will run.....

Nokia 8800 - Complete Newby Needs Help !!

Hi All
Im a complete newby to this tech lark so could do with some help!
Basically ive just got a nokia 8800 phone & its got nothing on it so I want to transfer some tunes, vids etc onto it.
Firstly ive installed the nokia pc suite & updated it on my pc but then relaised that the phone doesnt have a cable dock to connect to the pc !
Ive ordered a bluetooth dongle like this: http://cgi.ebay.co.uk/BLUETOOTH-DONGLE-FOR-NOKIA-N-GAGE-8800-6280-6230i-7373_W0QQitemZ220133688184QQ...
Do i need to install the software that come with the dongle? i.e. drivers & blue soleil?
When ive got passed this bit i assume pc suite will see the phone then?
Any step by step help would be appreciated.
Many thanks
Jason

Bluetooth and Windows is a bít tricky combination, because Windows XP (which I assume you have) has an inuildt Bluetooth driver software that works with many Bluetooth USB tcks tc. but not all.
YOu might have a Bluetooth that requires the Bluesoleil and the bluetooth conflicts in PC have been well documented in this board and everywhere else.
But you should try:
Install the CD first (if you have already put the bluetooth dongle to your PC without intalling the cd first you maybe in trouble already and it is a bit too lenghtly to hrlp, but google for xp bluetooth bluesoleil problem and oyu will find help.
However, if you have not yet put the bluetooth stick to you pc, put it there after you have installed the cd.
Then open PC suite and get connected and activate both phone bluetooth and pc and follow get connected wizard instructions

Complete newbie needs help inserting flv file into DW

This is a multi-part message in MIME format.
------=_NextPart_000_0015_01C98602.377A5370
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I'm having a challenge today. A client sent me two flv files.
When I =
installed CS4 I installed Flash for the first time so I'm
thinking, no =
problem. But I'd never opened it before (never needed it
until now). The =
app won't open. I just spent a ton of time uninstalling and
reinstalling =
and rebooting over and over and nothing...
So MAYBE, for now, I don't need it to work. I've also never
insterted =
Flash into DW. But it looks easy enough. In my html page I
choose =
insert/media/flv. So far so good. I've ftp'd the flv file so
I'm able to =
complete the dialog box with the path and size etc. I've
uploaded the =
progressiveplayer.swf and the chosen skin swf. I've saved the
html file =
it's embedded in and uploaded it. Shouldn't I now be able to
see this =
flv file displayed on the page? What did I miss? Here's the
link to my =
little test...
http://www.susanhowlett.com/assets/applets/susan-movie.html=20
The flv file is mm_susan_thanks.flv=20
Thanks for any insight/guidance.
Sheila
------=_NextPart_000_0015_01C98602.377A5370
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6001.18183"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>I'm having a
challenge today. A client =
sent me two=20
flv files. When I installed CS4 I installed Flash for the
first =
time so I'm=20
thinking, no problem. But I'd never opened it before (never
needed it =
until=20
now). The app won't open. I just spent a
ton of time =
uninstalling and=20
reinstalling and rebooting over and over and
nothing...</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>So MAYBE, for
now, I don't need it to =
work. I've=20
also never insterted Flash into DW. But it looks easy enough.
In my html =
page I=20
choose insert/media/flv. So far so good. I've ftp'd the flv
file so I'm =
able to=20
complete the dialog box with the path and size etc. I've
uploaded the=20
progressiveplayer.swf and the chosen skin swf. I've saved the
html file =
it's=20
embedded in and uploaded it. Shouldn't I now be able to see
this flv =
file=20
displayed on the page? What did I miss? Here's the link to my
little=20
test...</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><A=20
href=3D"mhtml:{2BC949A9-CCEB-407F-8078-5F999C2CADAA}mid://00000013/!x-usc=
susanhowlett.com/assets/applets/susan-movie.html</A>=20
</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>The flv file is
mm_susan_thanks.flv =
</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Thanks for any =
insight/guidance.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Sheila=20
</FONT> </DIV></FONT></DIV></DIV></BODY></HTML>
------=_NextPart_000_0015_01C98602.377A5370--

From my little knwledge, it is not possible to insert FLV
file in the HTML page directly.For this you have to made a player
with flash which plays the FLV.And this swf can emdded in the HTML
page.
You can also download free flash videoplayers like JW Player.
Thanks

My macbook is completely crazy! (NEED HELP!!!)

Similar Messages

Maybe you are looking for