My macbook is extremely SLOW after installing MAVERICK!, My laptop is extremely SLOW after installing MAVERICK!

anyone else have the same problem? and if so, what is being done about it??

Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. For Snow Leopard, start your Mac while holding the c key with its original OS X Install DVD inserted in its optical drive. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
Some users have reported an SMC reset to be beneficial. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Similar Messages

Newly installed Windows 8 laptop - WiFi immediately disables after trying to enable

Hi there,
This may be in the wrong forum but this is the best I could find. I have a Dell Latitude E6400 on which I installed Windows 8. I then downloaded and installed the Dell WiFi 1510 mini halfcard driver from its support website. I have the
WiFi device listed under Device Manager and appears under "Network and Connection Settings".
However, it always appears as "Disabled." When I try to enable it, it enables it and immediately disables itself again. I've tried uninstalling the device and restarting the computer in order to allow Windows to install it itself and
that doesn't fix the issue. I've also checked that the WLAN Autoconfig service is started and running in "Services."
I Googled my issue and it came back with some power management options. Tried those. Didn't work. It just keeps automatically disabling itself.
Any suggestions or help?
Thanks!

Hi,
I have never encounter the problem as you said, would you please provide a screenshot for us?
To fix this problem, you can try to reinstall Wlan network card driver for test.
In addition, if your current system installed any other Dell built-in network manager software, please try to uninstall them temporarilly for test.
Roger Lu
TechNet Community Support

Can't install CS2 on laptop with Elements 11 already installed.

I'm taking a workshop that requires Photoshop. I use Elements 11 currently. I bought a new laptop and installed my Elements with no problem. When I went to install CS2 it says it can't find any files with CS5. My question is there a way to install CS2 without uninstalling my Elements 11? My computer lady says it's quit involved removing all parts of Photoshop from files. I went with an older version of Photoshop because I plan on only using the CS2 for this workshop and going back to Elements afterwards. Any help or suggestions would be greatly appreciated. My new system is Windows 8.1

At least for Photoshop, CS (1) runs as does CS2 and CS 3 on my macs. I still have CS2 as Genuine Fractals doesn't work with CS3 without upgrading and I don't feel like paying for that so I run 2 to use it for scaling. Adobe was pretty clear on compatibility or not and you could have chosen not to install it based on their comments.
You can install OSX "backwards" with the original install disk for your machine or a retail install disk - it would have to be a clean install of course not an A&I or upgrade.
I retained Tiger with a clone backup on all three macs , apparently you did not think to make a backup first.
Why don't you just partition a smallish part of the drive to accommodate a basic Tiger installation and install CS2 on that and just boot into it when required? You can repartition non destructively now. That is probably the fastest and simplest way to run dual OS rather that reverting everything to Tiger. Or use an external FW disk and install Tiger to that and boot from it as needed. No different than Boot Camp, to use Windows when needed.

I have adobe create suite installed on my laptop. Can I also install it on my p.c. without purchasing another copy?

Can we install the software on more than one p.c.? I have it on my laptop, but would like to install creative suite on my desktop as well.

How do you install it on the second machine? When I tried to install, and I entered by serial number, it said "this serial number has already been used".

Having trouble w itunes installing on my laptop...will not install Apple support?

having issues intalling itunes on my laptop...error message is telling me that Apple Support was not installed and to uninstall and reinstall...tried all my limited knowledge will allow...need help please?

Go to control panel "Uninstall a program" and remove:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
After you have uninstalled all the items listed above go to start menu and click the computer link then open your c drive. After opening the c drive click "organize" on the upper left hand corner and select "folder and search options" then select the "view" tab. Then select the "Show hidden files and folders" and click the apply button and select ok and close.
Open your c drive and open the "users" file and then open the folder containg your selected computer name. After the file opens select the "local" folder and right click and select delete for all Apple files (itunes, quick time etc) Then open the "temp" file and remove and delete all apple files that may be in the temp file as you did in your "local" folder.
Then download itunes 9 from oldapps.com/itunes and install. Once installed itunes will open and you can update to a newer version from itunes

After installing maverick my computer is very slow

after installing maverick my computer is very slow, what can I do?

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

After installing iOS7 the typing is extremely slow!!!

After installing iOS7 the typing is extremely slow!!! It can take minuters to type a word and if I use the backspace it just dies and it takes forever for it to start working again. This is happening only on the apple applikations - not in Other apps (Facebook, instagram, etc). It makes writing maila and messages impossible - pleas help! ( I wrote this on my IPad that haven't been uppgraded yet - and is not going to be before the problems with my Phoenix is fixad....)
Best regards Sofia Elliot

Go to settings> iCloud turn off documents and data and restart your phone. It should resolve this.

Clean installed mavericks but it is dead slow now

I recently bought an old Macbook pro. It had previously installed with 160GB(7200rpm) of hard drive.
I updated this with mavericks 10.9.3 . And it was perfectly fine. rather super perfectly fine. Yesterday I upgraded its internal Harddrive with 320GB from my other laptop because I needed more space for my tutorials and data etc.
I installed mavericks on my newly installed HDD320GB(5200rpm). using USB8GB-2.0. Now my MBP is dead slow.. I installed mavericks, 3 times, but still slow slow and dead slow. It took 6 mintues to boot. previously about 4 ~5 hrs in installation..
After booting, I checked in Activity Monitor. and i see CPU on the bottom says.
System: 1.21%
User: 0.95%
Idle: 97.XX%
But If i keep staring on this It varies but still Idle is around 92% ~ 98%. and sometimes 45% to 70% I don't know which application is consuming my processor..
And If I open any application during this Activity MOnitor process it show fairly used processor like. idle is about 80%. But still every application responds too late.
Luckily I didn't remove mavericks from the older 160GB HDD. I booted my computer from that HDD as using external USB converter. But this time once again may macbook pro is super fine. It booted in 18seconds around. every application works great.
I want the same speed on my internal HDD, what is the problem...
I don't know what's wrong either with my newly installed 320GB-HDD or what.?
I'm using
2.5Ghz Intel Core 2 Duo
4GB- RAM,
NVIDIA GeForece 8600M GT 512 MB
OSX 10.9.3
Can somebody please tell me the solution, what's wrong with it.? I'm almost crying :(.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.

Jeremy.Laurin,
have you tried agb76’s approach here?

After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?

After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?
Model Name: MacBook Air
Model Identifier: MacBookAir6,1
Processor Name: Intel Core i5
Processor Speed: 1.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB

Hi ..
Better to troubleshoot Yosemite.
Not enough free storage space can slow your Mac down.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space. OS X Tips Where did my Disk Space go?
As for Safari, might be a cookies, cache, extensions, or plug-ins issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

I have a macbook purchased in dec 2009 with OS 10.6.8, i can't install Mavericks as it is not finding any place to install. It says it cant be install on the harddrive and i dont have any other option to select .. what to do?

i have a macbook purchased in dec 2009 with OS 10.6.8, i can't install Mavericks as it is not finding any place to install. It says it cant be install on the harddrive and i dont have any other option to select .. what to do?

imnyaar wrote:
... It says it cant be install on the harddrive
What does the message say, exactly?
Try this:
From the Finder's Go menu, choose Computer:
Double-click your hard disk icon. It is usually named "Macintosh HD":
Look for this folder:
If it appears in that window, drag it to the Trash.

After installing Mavericks, my laptop no longer boots.

After installing Mavericks, my laptop no longer boots. How can I restore it using the internet, or get it to start up again?
Thanks in Advance.

If a SMC reset does not restore life, make an appointment at an Apple store genius bar.
http://support.apple.com/kb/HT3964
Ciao.
You might also look at this:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Message was edited by: OGELTHORPE

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

HT1529 Part 1: Will a Late 2008 Unibody MacBook upgrade to Maverick? Will I be able to install 64 bit Windows 8 on Bootcamp?

Part 1: Will a Late 2008 Unibody MacBook upgrade to Maverick? Will I be able to install 64 bit Windows 8 on Bootcamp?

OS X Mavericks: System Requirements

My macbook is extremely SLOW after installing MAVERICK!, My laptop is extremely SLOW after installing MAVERICK!

Similar Messages

Maybe you are looking for