My MacBook is having problems with one CD (driver is okay?)

The CD doesn't start playing for about 15 seconds after inserting. It sounds like my computer is having a hard time reading it. What can be the problem???
ALL other CD's are running perfectly.
Message was edited by: that was my alias

Check if the disc is a CD+R/RW not a CD-R/RW. The + CD's tend to be a little slower on the Matshita drives. I guess that's just how they're made.

Similar Messages

Having problems with External Hard Drives on my Laptop

Ever since using linux i've always had the same problem. Whenever i connect a hard-drive, it keeps disconnecting/ spitting input-ouptut errors.
I thought it was because of the hard-drive failing, which turned out to be the problem with my last two, but i'm using another one (Seagate MomentusXT 500GB) and i'm getting the same problem.
I had just reformatted this hard drive from NTFS to Ext4 using Gparted, so maybe that's the problem? I'm really kind of lost.
I mount my HDD like this:
sudo mount /dev/sdd1 /mnt/usb
and unmount like this:
sudo umount /mnt/usb
It connects initially, and i'm able to put stuff onto it. I was able to put a whole TV series on it successfully, but when i tried copying my music onto it it failed and alot of the music didn't copy, giving me these errors:
ile system
cp: cannot create directory ‘/mnt/usb/music/Clawfinger’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Cake’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/The Glitch Mob - Discography’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Bastille - Bad Blood (The Extended Cut)’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/ARCTIC MONKEYS - DISCOGRAPHY (2005-13) [CHANNEL NEO]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/NIRVANA DISCOGRAPHY @320Kbps CbR Mp3 [TuGAZx]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/The Doors - STUDIO DISCOGRAPHY’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Tiesto - Red Lights (2014.Dance)’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Tiesto - A Town Called Paradise (Deluxe Edition) 2014 320kbps CBR MP3 [VX]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Daft Punk - Discography - 1994-2013’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Pink_Floyd_Greatest_Hits’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Calvin Harris - Discography - 2007-2013’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Weezer [Discography]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/MGMT’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Blackmill’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Avicii - Discography’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Zedd’: Read-only file system
cp: preserving times for ‘/mnt/usb/music’: Read-only file system
I can then unmount and mount the HDD again, and try again, but i keep getting the same problem.
Here's my dmesg:
[22951.444217] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[22966.616452] usb 1-1: device descriptor read/64, error -110
[22981.892003] usb 1-1: device descriptor read/64, error -110
[22982.155518] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[22997.327767] usb 1-1: device descriptor read/64, error -110
[23012.603571] usb 1-1: device descriptor read/64, error -110
[23012.867002] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[23017.881048] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23017.881078] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23023.098593] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23023.302055] usb 1-1: device not accepting address 19, error -62
[23023.462289] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[23028.476297] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23028.476314] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23033.693797] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23033.897336] usb 1-1: device not accepting address 19, error -62
[23033.897435] usb 1-1: USB disconnect, device number 19
[23033.903973] sd 10:0:0:0: [sdd] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00
[23033.903976] sd 10:0:0:0: [sdd] CDB:
[23033.903977] cdb[0]=0x2a: 2a 00 03 90 e5 10 00 00 f0 00
[23033.903982] blk_update_request: I/O error, dev sdd, sector 59827472
[23033.903985] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478464)
[23033.903987] buffer_io_error: 4990 callbacks suppressed
[23033.903988] Buffer I/O error on device sdd1, logical block 7478178
[23033.903990] Buffer I/O error on device sdd1, logical block 7478179
[23033.903991] Buffer I/O error on device sdd1, logical block 7478180
[23033.903992] Buffer I/O error on device sdd1, logical block 7478181
[23033.903993] Buffer I/O error on device sdd1, logical block 7478182
[23033.903994] Buffer I/O error on device sdd1, logical block 7478183
[23033.903995] Buffer I/O error on device sdd1, logical block 7478184
[23033.903996] Buffer I/O error on device sdd1, logical block 7478185
[23033.903997] Buffer I/O error on device sdd1, logical block 7478186
[23033.903998] Buffer I/O error on device sdd1, logical block 7478187
[23033.904015] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478524)
[23033.904027] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478554)
[23033.904050] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478584)
[23033.904066] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478614)
[23033.904080] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478644)
[23033.904095] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478674)
[23033.904110] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478704)
[23033.904124] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478734)
[23033.904139] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478764)
[23033.905630] sd 10:0:0:0: [sdd] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00
[23033.905632] sd 10:0:0:0: [sdd] CDB:
[23033.905633] cdb[0]=0x2a: 2a 00 03 90 e6 00 00 00 f0 00
[23033.905639] blk_update_request: I/O error, dev sdd, sector 59827712
[23033.906165] Aborting journal on device sdd1-8.
[23033.906176] JBD2: Error -5 detected when updating journal superblock for sdd1-8.
[23033.906270] EXT4-fs (sdd1): Delayed block allocation failed for inode 16777761 at logical offset 0 with max blocks 2048 with error 30
[23033.906272] EXT4-fs (sdd1): This should not happen!! Data will be lost
[23033.906276] EXT4-fs error (device sdd1) in ext4_writepages:2395: Journal has aborted
[23033.906793] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.906801] EXT4-fs error (device sdd1): ext4_journal_check_start:56: Detected aborted journal
[23033.906802] EXT4-fs (sdd1): Remounting filesystem read-only
[23033.906803] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.906808] EXT4-fs (sdd1): ext4_writepages: jbd2_start: 9223372036854775807 pages, ino 16777762; err -30
[23033.907641] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907644] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907690] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907692] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907736] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907738] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907771] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907773] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907805] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907845] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907886] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907919] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907947] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23034.490498] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880225074480
[23034.490502] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802250744c8
[23220.391199] usb 1-1: new high-speed USB device number 54 using xhci_hcd
[23235.563509] usb 1-1: device descriptor read/64, error -110
[23250.839126] usb 1-1: device descriptor read/64, error -110
[23251.102653] usb 1-1: new high-speed USB device number 55 using xhci_hcd
[23266.274917] usb 1-1: device descriptor read/64, error -110
[23281.550616] usb 1-1: device descriptor read/64, error -110
[23281.814174] usb 1-1: new high-speed USB device number 56 using xhci_hcd
[23286.831502] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23286.831579] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23292.049048] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23292.252556] usb 1-1: device not accepting address 56, error -62
[23292.412732] usb 1-1: new high-speed USB device number 57 using xhci_hcd
[23297.426714] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23297.426728] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23302.644273] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23302.847753] usb 1-1: device not accepting address 57, error -62
[23302.847781] usb usb1-port1: unable to enumerate USB device
Anyone know how to fix this?

There is a whole lot of bad going on there.
There are problems both drive errors and USB errors. I don't believe it.
I have a hunch the drive is starving for power.
USB devices are supposed to function all the way down to 4.25V. Not all do.
USB ports are supposed to be able to deliver 4.25V at the end of the cable at 500mA. Not all do.
USB 2.0 devices are not supposed to draw more than 100mA unless they negotiate for more. Some violate that.
USB 2.0 devices are never supposed to draw more than 500mA. Some violate that. Especially disk drives.
My guess is that your drive is drawing excess current and the voltage drop through the port and cable are dropping you below 4.25; or at least below the voltage that your drive goes "Tango Uniform"[1]. Does your drive have the option for external power? If so try it. Following up on wtx's comment; USB 3.0 is capable of delivering more power. Also, some drives have used a cable that violates just about every aspect of the USB specification: A "Y" cable that plugs into two host ports to provide more power to the guest. I despise this solution with every fiber of my electrical engineering existence; never-the-less, you might try one.
edit: [1] Teats Up.
Last edited by ewaller (2015-04-04 17:02:04)

MBP having problems with one particular wireless network

My MBP keeps dropping the wireless connection (or failing to find it in the first place) at one particular house. Unfortunately it's a house where I stay a lot. It tells me I'm not connected to the internet and times out any attempted connections. Sometimes it will connect for between 5 minutes and an hour, but then it loses connection again.
When it loses connection the other devices in the house (a Blackberry, iphone and someone elses Mac) all stay connected with no problem. I have never had problems in any other house or with any other connection.
The wireless has a WAP (or WAP 2) password. I have tried resetting and rebooting the modem, the router and the access point, getting Airport to learn or not learn the network, turning airport off and on and all the other usual options (for a clueless muppet like me) and sometimes I can connect again, sometimes not, but the connection is never permanent.
Any ideas please? Thanks very much
I'm on Mac OSX 10.6.7 if that is relevant

Sorry for being so clueless but I'm not sure of the answer to the first two questions. How do I find out?
There is nothing in my network preferences about protocol, but under "About this Mac" I found the following:
Supported PHY Modes: 802.11 a/b/g/n
There is nothing else nearby competing for radio frequencies - just the other devices mentioned all using the smae wireless signal.
Thanks so much for your help, and sorry that all the technical terms are so lost on me!

Having problems with one computer not "seeing" the Airport base station.

Aloha:
I have an Airport router hooked up to the internet via Cable. I have a laptop and G4 desktop talking to the the Airport Base Station via their respective Airport cards. This allows me to get to the internet with both of my computers. This system has worked just fine for several years, but recently my desktop computer has started to be unable to connect to my Airport Base Station. At first it was intermittent, but now it has stopped completely. The laptop continues to be able to get to the internet via my Airport base station.
The desktop is running OS 10.3.9 and the airport card in the desktop passes the hardware test that came with the laptop. But it can no longer see the signal from the ABS.
What might my problem be?
Dan

Hi Clinton:
I have tried that to no avail. I don't see any
signal, so I see no networks "in the box below" to
choose. My airport card does not see a signal, but
the airport card checks out ok in the hardware test.
Thanks for replying, Clinton, much appreciated.
Dan
Have you tried choosing "other..." and then entering the name of your network?

I installed Windows 8.1 bootcamp but I'm having problems with the nvidia driver

Windows 8.1 is boot camped and it works perfectly, Almost. Ill find myself scrolling, usually with the trackpad, sometimes with a mouse, and the screen will go black, flicker, and resume. It will also stop the driver in games when i press keys too quickly. It seems to be an input problem but i don't see how the keyboard and trackpad affect the video driver. I get an error message that says "NVIDIA driver has temporarily stopped but has recovered." I have installed the latest drivers from the NVIDIA Website as well as all windows 8.1 updates. Sometimes its bad enough that the computer reboots completely. Its getting frustrating as i can't complete tasks or enjoy recreational time. Has anyone had this issue and been able to fix it?
NVIDIA driver fails but recovers(or Reboots computer) when
     When i scroll through webpages using the trackpad or mouse, usually when i scroll quickly
     or input keystrokes quickly while running programs, usually games
Computer
     Macbook Pro(mid 2010)
     Intel core i5 (built in geforce 330M)
     OS X Yosemite 10.10.1
     Bootcamp 5.1.2
     Windows 8.1

Is the current nVidia driver the one that came with Bootcamp?

Having problem with X-fi drive need a he

I purchased X-fi Fatality platinum. . I've installed the sound card and X-Fi I/O Dri've on my computer but in the control panal / sound / recording, I don't see the inputs from the dri've. I see the Line in/ mic in from the audio card, but I don't see Line in 2/ mic in 2 from the dri've. I can hear the sound from the inputs on the dri've but becasue those inputs of the dri've does not show on control panal, I cannot select them as a default for recording.
is my dri've not installed correctely? or is there other options?
please help.... I've been struggling with this for two whole days.Message Edited by iccc00 on 0-4-200806:30 PM

First install the Audiodriver from the CD. Then update your drivers. I could not install the updated drivers directly without having the same problems.

Having problems with the Hard drive in my zen x

Hi,
I have a Zen xtra mp3 player and love it, b;ut currently took it to a marching band competition and well, it got dropped by one of the pit crew and you can guess the rest. i tried to boot it up and it goes into "rescue Mode" First I tried to reinstall the OS, then i tried reformating it. All it said was "Harddisk Problem" so im pretty sure the hard dri've is dead. but my question is, does this take just a regular laptop hard dri've or do you need a special one? and also, How do you go about getting the old hard dri've out, I know it can't be to hard but not sure. Any help is appreciated.
Kevin

You can try the advice here in the Zen FAQ at Nomadness.net at your OWN RISK. If you don't want to try this or are under warranty then contact Creative Support.
If you aren't under warranty you can contact Creative Support to see if they will repair it. If you want to try repairing it yourself, taking the risk the hard disk is at fault, then you can follow Rudi Cheow's excellent guide. There's also a thread here at the Zen Nomadness.net forum on compatible dri'ves, and the last page of Rudi's guide also has information on this.

Having problems with front row (and the opticle drive)

I bought my macbook three days ago, and I'm already having problems. First off, I transfered music from my user profile on my old iMac G5 to the macbook via data DVD. My music collection had some purchaces from the itunes store, so I had to go through the authorization thing, and I can now play them just fine in the iTunes library, but the problem is, if I try to use the front row program to play my purchaced music, I get the message saying that I have to authorize it first. What the ****? Does anybody else have this problem? Also, like many other macbook users, I'm having problems with the opticle drive, such as getting cds to be recognized and other things of that nature.

I noticed that this problem started after I tried to use a software to unlock my drive's region...
I believe this is the problem. The VLC Media Player will usually play DVDs from other regions without changing the settings on your optical drive. You may need to reset your optical drive's firmware back to the original setting, make sure you have the region set for the one you'd prefer to use the most and then use VLC to play the other DVDs.
-Doug
P.S. After two years in the Front Row forum, I'm not sure I've ever heard of anyone playing HDDVD_TS folders with Front Row. I'm not saying it won't work, but I'm not sure it's really supported either. I do have DVD Studio Pro myself, but I'll have friends or family staying with me for nearly the next month, so my evenings and weekends will be a bit full to try making one up for testing...

Beginner Has Problem With Loading JDBC Driver Using MySQL

Hi, I am having problem with loading JDBC driver, and need your diagnotic help.
1. I have installed MySQL (C:\mysql), created a databse (soup), and created a littel table (VIDEOS). I am able to see the table in the console:
sql> select * from videos
2. I have downloaded the latest version of Connector/J (mysql-connector-java-3.1.0-alpha.zip), and unzip the zip file into my C:\ directory.
3. I copied the mysql-connector-java-3.1.0-alpha-bin.jar to the C:\j2sdk1.4.1_02\jre\lib\ext folder and it is in my CLASSPATH
4. MySQL server is running
C:\> C:\mysql\bin\mysqld-nt --standalone
5. open another DOS window and use the database
mysql>USE SOUP
6. succesfully compiled a Java program (javac Test.java):
import java.sql.* ;
public class Test
public static void main( String[] args )
try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
try
Connection con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/soup" );
try
Statement statement = con.createStatement();
ResultSet rs = statement.executeQuery("SELECT TITLE FROM VIDEOS");
while ( rs.next() )
System.out.println( rs.getString( "TITLE" ) );
rs.close();
statement.close();
catch ( SQLException e )
System.out.println( "JDBC error: " + e );
finally
con.close();
catch( SQLException e )
System.out.println( "could not get JDBC connection: " + e );
catch( Exception e )
System.out.println( "could not load JDBC driver: " + e );
7. when I run the Java program (java Test), I got
the message:
could not load JDBC driver: java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
What am I missing?

Hi,
I missed to specify test in my last post.
Try running your program by explicitly setting the classspath when
running your program . java -classpath c:\mysql-connector-java-3.1.0-alpha-bin.jar test
Make sure your jar file contains org.gjt.mm.mysql.Driver class

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.

I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
It happened suddenly and seemed to get better after a day or two but then went completely after another day.
I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computer

The following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unable to do so with my iMac. This problem started suddenly and the error message i get is error 5.7.8. Please Help

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

My MacBook is having problems with one CD (driver is okay?)

Similar Messages

Maybe you are looking for