My Macbook is not finding my NIkon D70s.  I do not see it in the finder and my Adobe Bridge is not recognizing that I have a camera hooked up.

In the past I have downloaded pictures from my Nikon D70s.  This time it is not showing up in the finder and Adobe Bridge does not see it as a device.  I have the camera hooked up and I have it turned on like I would normally do when dwonloading pictures.  I think the last time I had it connected to the computer I may have turned it off before ejecting it properly.  Wondering if that has anything to do with my problem and if so how can I fix it now? 

Launch Image capture and see if it shows up there.

Similar Messages

  • Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

    Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
    Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
    Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

    Funny how you answer to "troll". (What's your handle on AT&T forums?)
    Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
    I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
    Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
    We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

  • Installed up-dates and now Adobe Bridge will not open

    Installed new up-dates for Photoshop CC and now Bridge will not open?

    HI Michael,
    You can now install older versions of Adobe products straight from Creative Cloud Desktop. (Version 1.6.0.393)
    Choose 'Previous Version' in the Apps filter as shown above and then Chose Bridge 6.0 for Bridge.
    -Pragya

  • When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year.  Why is this and how can I look up the year?

    When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year.  Why is this and how can I look up the year? 

    Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
    To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition????

    I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition. In order to have a GUID partition, it suggested I go to disk utility and make the change. I couldn't see the partition tabs in the disk utility application. So how do I accomplish the GUID partition?

    The problem is, reformatting the partition may require you erase the hard drive.   Normally Intel Macs are preformatted GUID.    The fact that yours is not, says someone who initially installed the system on your Mac did you a disservice.   Regardless, you should backup your data before you upgrade.  GUID formatted drives generally are not compatible with iBooks (pre-2006 consumer notebooks by Apple) Powerbooks, and PowerMacs, and iMac G5s.    So if you indeed have machine with the MacBook name on the screen frame, it was not properly formatted from the beginning.  

  • Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

    Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

    Hi,
    CS6
    Van: R_Kelly [email protected]
    Verzonden: maandag 16 september 2013 18:42
    Aan: Hans van Sloten
    Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    created by R_Kelly <http://forums.adobe.com/people/R_Kelly>  in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

  • I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    Hey skyshade13,
    Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    For further information see the following information:
    OS X Lion: iTunes opens to "created by a newer version" alert
    http://support.apple.com/kb/TS3918
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Thanks,
    Matt M.

  • I have US$8 cents left in my account.  I have moved to Canada and brought a $50 Canadian prepaid card. I am not able to redeem my C$50 until I use up the US$cents.  However I could not find anything on app store cost 8cents.anyway I can get rid the8cent

    I have US$8 cents left in my account.  I have moved to Canada and brought a $50 Canadian prepaid card. I am not able to redeem my C$50 until I use up the US$cents.  However I could not find anything on app store cost 8cents.anyway I can get rid the 8 cent so that I can top up the $50 canadian prepaid credit

    Click here and request assistance.
    (65561)

  • My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    Need Help Ye,
    boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

  • Have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. pl

    have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. How can I get the Creative Cloud Market Library?

    kglad,
    Thanks for the suggestion but I have attempted this many times to no avail. As I said in my original post, "I have researched this problem on this forum and the Adobe site and believe that I have tried everything over the past week."
    It is very late here (I am in Greece). I will have a further attempt in the morning. The windows machine is hut down. Thanks for your help.
    Bob

  • I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

    I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

    Updated printer drivers.
    http://support.apple.com/kb/DL899

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • The java and sql object type  was not matched

    My table(Oracle10.2) has a varying arrays column. For mapping to java classes, I use JDeveloper(10.1.3.1.0) to generate java classes. Then I try to insert a record into this varrying arrays column with java. While it always complaints java.sql.SQLException.the java and sql object type was not matched. I can not find the reason.
    My java code:
                   StructDescriptor structdesc = StructDescriptor.createDescriptor(
                             "VARRAY_SEQ", con);
                   int nid=20;
                   int pid=546;
                   BigDecimal mynid=new BigDecimal(nid);
                   mynid=mynid.setScale(0, BigDecimal.ROUND_HALF_UP);
                   BigDecimal mypid=new BigDecimal(pid);
                   mypid=mypid.setScale(0, BigDecimal.ROUND_HALF_UP);
                   Object[] attributes = { "ASDF", mynid, "Developer", mypid,
                             "rwretw" };
                   STRUCT Rel = new STRUCT(structdesc, con, attributes);
                   stmt.setObject(8, Rel);
                   stmt.execute();
                   stmt.close();
    And the STRUCT is
    public RelSeq(String nucl, java.math.BigDecimal neId, String nuor, java.math.BigDecimal pId, String phor) throws SQLException
    { _init_struct(true);
    setNucl(nucl);
    setNeId(neId);
    setNuor(nuor);
    setPId(pId);
    setPhor(phor);
    }

    My table(Oracle10.2) has a varying arrays column. For mapping to java classes, I use JDeveloper(10.1.3.1.0) to generate java classes. Then I try to insert a record into this varrying arrays column with java. While it always complaints java.sql.SQLException.the java and sql object type was not matched. I can not find the reason.
    My java code:
                   StructDescriptor structdesc = StructDescriptor.createDescriptor(
                             "VARRAY_SEQ", con);
                   int nid=20;
                   int pid=546;
                   BigDecimal mynid=new BigDecimal(nid);
                   mynid=mynid.setScale(0, BigDecimal.ROUND_HALF_UP);
                   BigDecimal mypid=new BigDecimal(pid);
                   mypid=mypid.setScale(0, BigDecimal.ROUND_HALF_UP);
                   Object[] attributes = { "ASDF", mynid, "Developer", mypid,
                             "rwretw" };
                   STRUCT Rel = new STRUCT(structdesc, con, attributes);
                   stmt.setObject(8, Rel);
                   stmt.execute();
                   stmt.close();
    And the STRUCT is
    public RelSeq(String nucl, java.math.BigDecimal neId, String nuor, java.math.BigDecimal pId, String phor) throws SQLException
    { _init_struct(true);
    setNucl(nucl);
    setNeId(neId);
    setNuor(nuor);
    setPId(pId);
    setPhor(phor);
    }

  • HT1338 My macbook came with snow leopard, if  I upgrade to Lion will I be able to use my restore disks in the future and if I do use my disks that brings me back to snow leopard, Will itunes remember I purchased Lion or will I have to purchase a second ti

    My macbook came with snow leopard, if  I upgrade to Lion will I be able to use my restore disks in the future and if I do use my disks that brings me back to snow leopard, Will itunes remember I purchased Lion or will I have to purchase a second time ?

    At this point, you can no longer download Lion (10.7) from the App Store, only Mountain Lion (10.8) - make sure all your applications are fully compatible if you decide to upgrade.
    Yes, you can restore 10.6 using your restore disc should you wish to - and the App Store (not ITunes) will have a record of all your purchases, since it's linked to your AppleId.
    Matt

Maybe you are looking for