My macbook is stuck on grey screen

I cannot get to my desktop. This started 2 days ago, leaving it off doesn't help. Battery is fully charged but does get very hot very quickly - this is new in the last 2-3 weeks.
I do see other questions here but they aren't addressing my concern. I just need to get to my desktop and use iCloud to transfer to my new macbook - or to at least restore from my external hard drive.
There is no way to get out of this grey screen either, other than using "power on / off" and I'm concerned that using this shut down method all the time may do further damage. The overheating that is suddenly occurring is a concern as well. I'm not certain of my OS without being on there to check but the one I've listed is close.
Any help much appreciated.

http://support.apple.com/kb/TS2570

Similar Messages

  • My MacBook is stuck on grey screen with rotating circle

    My MacBook is stuck on grey screen with rotating circle

    See this Apple note on dealing with that.  If you have OS X 10.8 Mountain Lion, this is the equivalent note, howver, it's not as detailed.

  • Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel HELP?!?!

    Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel. What can I do, will I loose everything on my laptop?

    ashg23 wrote:
    Thank you, I have restarted but it is still stuck at the grey page with the spinning wheel? Any idea?
    Have you started up holding down Command + R and attempted to install again?
    Pete

  • MacBook Pro stuck at grey screen after Yosemite upgrade

    upgraded to yosemite yesterday. Reboot and stuck at grey screen(login in page) when i log in there is some codes thing at the left top corner of the screen. and then it reboots again. Which means I can never log onto the computer. what should I do

    If you can't start up and log in in the usual way, try in safe mode.
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
    ☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    Safe mode is slower than normal, and some things won’t work at all.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
    If you're able to log in, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.

  • MacBook Air stuck on grey screen

    My MacBook Air 2011 will not boot, as it gets stuck on a grey screen. Nothing works, not even any keyboard shortcuts.
    What ive tried:
    - Recovery Mode (Wont even change the screen, waited about 5 minutes)
    - Resetting PVC or whatever its called (Just reboots the computer)
    - Safe Boot (trying right now, told that it takes a while)
    Taking it back to the apple store is my last resort, and I think im out of my warranty (no applecare).
    Any help?

    ANSWER
    I totally understand this issue!
    It's happened to me when I can't even move my mouse around. It's stuck on a grey screen and it's driving me nuts. i know this answer. This problem happened to my last night actually.
    What I did was leave it be for as long as it needs. My screen was grey for 24 hours. When I woke up in the morning, the screen was back to normal, on the screen I needed to log on with. BY THE WAY, I prayed for my laptop. LOL! I really hope you don't end up with a "hunk" of $1000 dollars on you're desk. Maybe this will take longer than mine did, OR shorter amount of time.
    QUESTION.
    JohGoins wrote:
    My MacBook Air 2011 will not boot, as it gets stuck on a grey screen. Nothing works, not even any keyboard shortcuts.
    What ive tried:
    - Recovery Mode (Wont even change the screen, waited about 5 minutes)
    - Resetting PVC or whatever its called (Just reboots the computer)
    - Safe Boot (trying right now, told that it takes a while)
    Taking it back to the apple store is my last resort, and I think im out of my warranty (no applecare).
    Any help?

  • My 2014 MacBook Pro stuck on grey screen since trying to update software over an hour ago

    My 2012 MacBook Pro has been stuck on the grey screen for more than hour since I tried updating the software.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • MacBook Air stuck in grey screen after ML installation

    Hi everybody,
    I have downloaded and installed Mountain Lion on my MacBook Air (2011). After the installation the computer restarted and stuck in the grey loading screen, showing the apple logo and the turning wheel. I've left it alone for hours but nothing happens. This is still the case and I cannot find a way out.
    Here is what I have tried so far:
    - Reload and reinstall ML via recovery mode (twice). Recovery mode shows me that 10.8 is installed, by the way
    - Restart without peripherals connected
    - Reset PRAM and NVRAM
    - Disconnect all cables and let the computer rest
    - Diagnose and repair hard drive (showed me a message that a Java-related group has a value of 80 but should be 0. Repair was "successful")
    - Safe boot (A bar appears in loading screen but disappears after it is about halfway full and I'm back in grey screen)
    Unfortunately none of this worked. I have a Time Machine backup but it is located at the other end of the country (long story) and I can't access it easily.
    Do you guys have any more ideas what else I could try? I'd really appreciate it.
    Thanks!
    B4sti

    I'm having the same issue. My MacBook air is stuck on the grey screen with the apple logo. I've waited for hours. Has anyone found a resolution to this issue?

  • MacBook Air stuck on grey screen! Help! Help!

    I was trying to uninstall Firefox so I moved the icon into the trashcan but it wouldn't delete.  So I moved the two files I found in the trash to the desktop and then I restarted.  Now my mac is stuck on the grey apple screen with the little timer.  I did the PRAM restart thing...it chimed and went to the grey screen again.  I am pretty sure the problem is that the Firefox is screwed up and Firefox is supposed to be the first app to load.  What can I do???? Please please please help!  I am totally lost here.  Thanks!

    Being stuck at the grey screen generally means there's something wrong involving reading something from or writing something to the hard drive. Letting the battery die may be something that is sometimes useful for a phone or iPod, but never for a computer.
    Step 1: try restarting in Safe Mode. Reboot and when you hear the chime and/or the LCD backlight comes on press and hold the shift key until you see the Apple icon. The bootup will take longer than normal because the hard drive is being examined and repaired.  If this works you'll get to the desktop but Safe Mode only loads a minimal number of drivers so some things won't work. Reboot normally and see if you can get to the desktop now. If Step 1 failed or if after rebooting you returned to the gray screen try step 2.
    Step 2: try restarting in Recovery Mode. Reboot and when you hear the chime and/or the LCD backlight comes on press and hold the command and R keys. You should boot into a utility mode where you can a) check the hard drive directory and repair it if need be and b) download and reinstall the operating system and that's what you should try doing.
    If step 2 fails reboot holding option, command and R. This is Internet Recovery mode which is similar to Recovery mode except the drive will probably need to be formatted or partitioned before the OS can be reinstalled. This will erase all your data.
    And if this fails call AppleCare or make an appointment at the Apple store.

  • Macbook Pro stuck on grey screen with Apple logo

    Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X. Any suggestions on what to do?

    Create a data recovery, undelete boot drive
    dustysjuls wrote:
    Will that erase all of the files on my hard drive? Or will it just erase and reinstall the operating system? I do not have my files backed up.
    A #18 Reinstall Just OS X, details here:
    Step by Step to fix your Mac

  • Macbook pro stuck on grey screen and making buzzing noise

    hi,
    Lately my mac has been playing up (1 year old), ever now and then it would make a funny buzzing noise, coming from the left side..  and i noticed it was running slower than usual. Im Running Mountain Lion and have 566GB of disk space left... after using it for about 5 minutes the buzzing noise would start and it would become unresposive with the spiral beach ball.  So i would have to hard restart it.  Now ever time i turn it on it gets to a grey screen and doesnt load further. eventually the sound starts again!! i have tried starting it in safe mode and verifying my disk in utilities where everything "seems to be ok" !!    someone please help!!!  

    Ethan997,
    define “an average disk”.
    Your question regarding fault is akin to asking “is it my fault or the car maker’s fault that my spark plugs no longer work?” — disks, like spark plugs, don’t last forever, and fault doesn’t come into it. Similarly, the fact that your disk (or spark plugs) worked yesterday and doesn’t work today is not a sudden “breakage” — by their nature, they have a finite, variable amount of time in which they do work. This is why (in the case of disks) making regular backups is important; when the disk stops working, you’ll have an easy way to recover from such a situation.
    That being said, if your MacBook Pro is still under warranty, you should be able to get a replacement disk from Apple. And even if it isn’t, you could  still try reformatting your current disk, to see if you can squeeze some more use out of it — but if the reformatted volume keeps needing to be repaired (and you have the patience to deal with recovering from the same situation again and again), that’s a sure sign that a new disk would be your best option.

  • MacBook gets stuck at grey screen at load up

    help?
    I've tried everything in the manual and even did a hard drive test, but the test couldn't detect anything.

    hey glamslamt
    welcome to the apple fourms glad to see a fellow canadian here
    so your macbook is booting to a grey screen do you see the apple or gear to show its loading or is it a solid grey screen
    not sure what your manual said to try for this one but heres some steps i would try
    1.safe boot........ hold down the shift key and start the computer up
    -if you can get into safe boot try removing all log in items from system prefrences / accounts (login itmes tab)
    -remove the machd/library/caches folder to the desktop try restarting
    2.try booting the computer to start up manager (hold down the option key and power on the computer)
    -if you get here put install disk 1 in and try to boot to the install disk
    if you can get to the install disk run a disk utility found under the untiliys menu in the main menu bar do a repair of the machd
    not sure if you have tried all of these but let me know if you have and what you might have found out i will keep a eye on this tomorrow from work for you

  • Macbook pro stuck on grey screen

    I recently got a version of mac that i thought i could use on my macbook from the internet and when i tried to run the installer it quit at the very end. after that none of my applications would open. i tried to reset but then it just goes directly to the apple logo on the grey screen with no loading bar or spinning circle at all. it just stays there now. is there any way i could do a reset of my laptop preferrably not using the disk to install mac again? im currently using 10.6.

    skylar57 wrote:
    I recently got a version of mac that i thought i could use on my macbook from the internet
    Does not make sense.  Please clarify
    and when i tried to run the installer it quit at the very end. after that none of my applications would open. i tried to reset but then it just goes directly to the apple logo on the grey screen with no loading bar or spinning circle at all. it just stays there now. is there any way i could do a reset of my laptop preferrably not using the disk to install mac again? im currently using 10.6.
    http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    Maybe this might help.
    http://support.apple.com/kb/TS2570

  • Macbook pro model A1278 wont boot osx stuck at grey screen

    I have had my mbp for about 3 years now and has worked great.  Just today i got home from work and when i opened the macbook which was already running I was in OSX but it was frozen with colored wheel spinning.  I had never experiened this before but I didnt think too much of it and held down the power button to reset it.  Now i am stuck at the grey screen with the Apple Logo and spinning wheel and cant get back into OSX at all.  So i started googling (on another computer obviously) and tried:
    1.  boot in safe mode.  Didnt work, still stuck at grey screen
    2.  boot in safe mode with "commd-shift-v" to see info.  stuck in "dos" looking screen. see pic at bottom.
    3.  tried resetting VRAM w/ "commd-opt-p-r".  did not work, still stuck at grey screen.
    4.  got original OSX install DVD.  Was able to boot to disc and make it to disk utilities.  went to repair and got error "unable to unmount disk"
    5.  ran "repair permissions" and completed that.  ran "verify disk" and got green "disk ok" message.  then re-ran repair and got same "unable to unmount disk"
    so know i am worried.  my main concern is the 80 GB of music I have on this computer (and dont currently have backed-up {que back-up lectures}) and my pictures.  Does it sound possible to recover music and pics based on this little bit of info?  Im willing to take it to the Apple store and pay the price if it sounds like I can recover it.  I am pretty computer savy but am reluctanct to just start trying anything that could lose my music/pics.  I cant try just deleteing and restoring OSX to factory settings and losing all that music/pics.
    so...what is best approach to access and back up these files myself?  I do have another macbook with a firewire connection but am not familiar with that process.  I will get a external HD immediatly (now ofcourse)...can I backup my files from disc utility?
    Thanks for any help.

    Sorry about specs...i entered in drop box menu but realize doesnt show on thread:
    MacBook Pro "Core 2 Duo" 2.53 13" (SD/FW)
    2.53 GHz Core 2 Duo (P8700)
    Intro Date:
    June 8, 2009
    Disc Date:
    April 13, 2010
    Order No:
    MB991LL/A
    Model No:
    A1278 (EMC 2326*)
    Subfamily:
    Mid-2009 13"
    Model ID:
    MacBookPro5,5
    Std RAM:
    4 GB
    Std VRAM:
    256 MB
    Std Storage:
    250 GB (5400 RPM)
    Std Optical:
    8X DL "SuperDrive"
    I was running the last vesion of snow leopard (10.6.8 i think).
    I picked up a firewire today and am going to attempt to make "broken" macbook target and pull files onto other macbook.  Will give an update tomorrow after attempt.  Thank you for fast response.

Maybe you are looking for