My MacBook is super slow. What can I do to get up to speed?
Can I add memory?
I havenlots of photos and documents to move off of the drive. What is the best place to store thousands of pictures that is not too expensive?
Hey Appleotter,
Thanks for the question. I understand that you are experiencing performance issues with your Macbook. The following resource may provide a solution:
OS X Mountain Lion: If your Mac runs slowly
http://support.apple.com/kb/PH10798
Thanks,
Matt M.
Similar Messages
-
My MacBook is so slow, what can I do?
My MacBook2,1 is four and a half years old. I understand, of course, that it's probably just becuase it's old- but it's running so slow! Opening/closing programs, even things like copying and pasting can take up to a couple of minutes! Does anyone know anything that I can do to speed it up? If I take it to an apple store will there be anything they can do?
I can't afford to replace it with a Mac since they stopped making the cheaper model MacBooks... so it would have to be a return to Windows whenever this one dies... yikes.Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Silver Keeper
SuperDuper!
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
If all fails to help then back up your files, boot from your installer disc and do an Erase and Install. Then restore your files from the backup. -
HT1338 Macbook Pro is slow what can i do
I am a graphic designer with all the programs Adobe creative suite, on the internet all day long, my Macbook pro is sooo slow
Macbook Pro 15" w/ 2.53 GHz Intel core 2 dup n 4 GB `067 DDR3Max out your ram to 8GB.
How large is your hard drive and how much hard drive space do you have left? -
Firefox was downloading fast for my connection speed but now it is very slow, what can i do?
Firefox was downloading at about 45-60 kbs, which is fast for my connection, just a few days ago, but now im lucky if it downloads at 20 kbs, what can I do to get my download speeds back to what they were? And I have already freed up space on my computer until I now have 50.8 GB of free space
I have Vista 32 bit on my computer and the latest version of Firefox installed.
== about 3 days agohere are some Tips&Tricks that can help you double the speed of Firefox.
1. Type about:config in the address bar and then press Enter.
2. In the filter search bar type network.http.pipelining. Be sure the value field is set true,if not double-click to set true.
HTTP is the application-layer protocol that most web pages are transferred with. In HTTP 1.1, multiple requests can be sent before any responses are received. This is known as pipelining. Pipelining reduces page loading times, but not all servers support it.
3. Go back to the filter search bar and type network.http.pipelining.maxrequests. Double-click this option and set its value to 8.
4. In the filter search bar and type network.http.proxy.pipelining. Once opened double-click on it and set it to true.
5. In IPv6-capable DNS servers, an IPv4 address may be returned when an IPv6 address is requested. It is possible for Mozilla to recover from this misinformation, but a significant delay is introduced.
Type network.dns.disableIPv6 in the filter search bar and set this option to true by double clicking on it.
6. CONTENT INTERRUPT PARSING
This preference controls if the application will interrupt parsing a page to respond to UI events. It does not exist by default.
Right-click (Apple users ctrl-click) anywhere in the about:config window, select New and then Boolean from the pop-up menu. Then:
A. Enter content.interrupt.parsing in the New boolean value pop-up window and click OK
B. When prompted to choose the value for the new boolean, select true and click OK.
7. Rather than wait until a page has completely downloaded to display it to the user, Mozilla applications will regularly render what has been received to that point. This option controls the maximum amount of time the application will be unresponsive while rendering pages.
Right-click (Apple users ctrl-click) anywhere in the about:config window, select New and then Integer from the pop-up menu.
A. Enter content.max.tokenizing.time in the New integer value pop-up window and click OK
B. You will be prompted to enter a value. Enter 2250000 and click OK.
8. CONTENT NOTIFY INTERVAL
This option sets the minimum amount of time to wait between reflows. Right-click (Apple users ctrl-click) anywhere in the about:config window, select New and then Integer from the pop-up menu.
A. Type content.notify.interval in the New integer value pop-up window and click OK.
B. You will be prompted to enter a value. Enter 750000 and click OK.
9. CONTENT NOTIFY ONTIMER
A. This option sets if to reflow pages at an interval any higher than that specified by content.notify.interval. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Boolean from the pop-up menu.
B. Type content.notify.ontimer in the New boolean value pop-up window and click OK.
C. You will be prompted to choose the value for the new boolean. Select true and click OK.
10. Notify Backoffcount
This option controls the maximum number of times the content will do timer-based reflows. After this number has been reached, the page will only reflow once it is finished downloading. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
A. Enter content.notify.backoffcount in the New integer value pop-up window and click OK.
B. You will be prompted to enter a value. Enter 5 and click OK.
11. CONTENT SWITCH THRESHOLD
You can interact with a loading page when content.interrupt.parsing is set to true. When a page is loading, the application has two modes: a high frequency interrupt mode and a low frequency interrupt mode. The first one interrupts the parser more frequently to allow for greater UI responsiveness during page load.
The low frequency interrupt mode interrupts the parser less frequently to allow for quicker page load. The application enters high frequency interrupt mode when you move the mouse or type on the keyboard and switch back to low frequency mode when you had no activity for a certain amount of time. This preference controls that amount of time. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
A. Enter content.switch.threshold in the New integer value pop-up window and click OK.
B. You will be prompted to enter a value. Enter 750000 and click OK.
12. NGLAYOUT INITIALPAINT DELAY
Mozilla applications render web pages incrementally, they display what’s been received of a page before the entire page has been downloaded. Since the start of a web page normally doesn’t have much useful information to display, Mozilla applications will wait a short interval before first rendering a page. This preference controls that interval. Right-click (Apple users ctrl-click) anywhere in the about:config window and select New and then Integer from the pop-up menu.
A. Enter nglayout.initialpaint.delay in the New integer value pop-up window and click OK.
B. You will be prompted to enter a value. Enter 0 and click OK. -
My macbook pro is very slow. what can i do?
my macbook pro is very slow. what can i do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
My MacBook Pro just started to run very slow, what can I do to fix it?
My MacBook Pro just started to run very slow, what can I do to fix it?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
My MacBook 13'' 2014 is very slow what can I do?
My MacBook 13'' 2014 is very slow what can I do?
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have a 4 year old macbook pro that is not running very well. It heats up quickly and becomes so hot you can hardly touch the bottom. It is also running slow and has been freezing more lately. What can I do to get to running better again?
When that is happening run this to see what is running and then copy and paste the results here:
http://www.etresoft.com/etrecheck -
My macbook pro is going very slow what can I do?
my macbook pro is going very slow what can I do?
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
i upload all of my photos from my iphone 5 onto my macbook air to get more space on my phone, and now whenver i try to upload it says there is no more storage or there was a problem transferring a picture. what can I do to get more space onto my iphoto? I've tried putting the pictures on flashdrives, but iphoto would no tlet me transfer.
I don't know how large the SSD (solid state hard drive) is, or how big your iPhone 5 is, but with some iPhones having 64GB and some Airs having as little as 64GB and some having as much as 512GB it's not hard to see how storing the contents of your iPhone 5 on your Macbook Air could run you out of space.
Go to the Macbook Air and bring up a finder window and pull the Go menu down and go to the Computer. Right click on the Macintosh HD and select get info. See if there is any available space on the MacBook Air. If not you are out of SSD space (you're storing more on your Macbook Air than it has storage for). I'm not sure if iTunes can store its library on an external hard drive or quite how you would make that happen. But even if you managed that, when the hard drive was disconnected, you would lose access to your library. Using a smart media card might be possible (I don't know) but it would probably be irritatingly slow. If you have a small Air and a big iPhone you might just have to find a different computer to sync to. Just remember a 64GB iPhone is a big chunk of SSD for a Macbook Air. I did it with my previous and my current Air but even my previous one had 256GB and I really just fit. -
I have a macbook pro 5,3 white I am trying to hook up to a samsung hdtv. I have used a mini dv to hdmi adapter but I get no sound on my tv. What can I do to get sound?
The Mini DisplayPort-to-HDMI adaptor will only pass video in most cases. You will need to run a separate audio cable along with it. Likely a 3.5mm (male-to-male) cable. Or a 3.5mm (male) to red/white RCA (male) cable. Just depends on what audio input ports your TV has dedicated to the HDMI input.
-
My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?
I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good... -
Myfi is running very slow, what can cause this?
Myfi is running very slow, what can cause this?
Either a service problem in your area or a glitch/hardware problem on the Jetpack.
To determine service problems simply travel to a different area and rerun your speed test. If the problem persists then its a glitch/hardware problem on the Jetpack. If not then its a service problem in that particular area that would need to be addressed by VZW or improved with the usage of antennas/boosters.
When performance testing be sure to use a tool that is universal to better illustrate the problem. For example a common utility is to speed test using www.speedtest.net. Run this test a few times to build an average and then perform the same tests in a different location or after changing something around. -
after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???
You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]> -
FaceTime is not connecting on my iPad mini; however, it is working on my MacBook Pro. What can I do to get facetime back on my iPad?
Right now the best thing to do is be patient. The last six days many people have been reporting problems with FaceTime. The source of the problems remains unknown.
Maybe you are looking for
-
Newbe question about SG300-20 dropping port to Router
Hello to you all Today I received my new SG 300-20 managed switch to replace an unmanaged switch with some faulty ports. I want to use it in a a combined Home / Small Office environment. It is my first purchase and use of a managed switch so am still
-
Purchase Order approval workflows not forwarding through TC SWIA
Hi When I am forwarding work item to other user I am getting following error. Work item 000015375242: Forwarding not allowed in status READY Message no. WL842 Diagnosis The work item cannot be forwarded in its current status. System Response The acti
-
When clicked on an icon in the infopath 2013 form, it will open another infopath 2013 form from another file. How do?
-
SSO in federated portal network?
Is it possible to connect two portals while the user IDs are different? Is it possible to change user id while LogonTicket transfered from consumer to producer. If FPN not provide this feature, are there any substitute solutaions to implement it?
-
Using OS Mavericks can't send mail on hotmail?
I can't send mail on hotmail using os x mavericks, why?