My macbook is two and half year old, going to sleep mode randomly

Having used this Macbook for almost two and half years, my machine has suddenly generated the problem of going to random sleep. It started as an infrequent thing, then it started happening on a regular basis, to the point that it became almost impossible to work with it. When the computer goes to sleep mode, it doesn't wake up with any key, it has to be woken up by pressing the power button lightly.
Here are the steps I took:
1. The normal thing I did was search Apple Forum and then reset SMC, PRam, then changed energy saving options, everything. Nothing worked.
2. Ran the hardware test and no problems found.
3. Ran the Macbook with all options: with just the battery, without the Magsafe connected, with Battery and Magsafe connected together, with battery removed and the computer running on Magsafe only. Random Sleep continues
4. Thought must be a connection issue and ran to Apple Store in Kolkata, India, thinking that it could be a connection issue with the sleep-mode cable. Apple Store kept the Macbook for seven days, saying that they needed to check the machine, returned it on the seventh day saying that the machine was fine and charged me Indian Rupee 1,500/- (about $ 34). I came back home and the problem persists.
(Here I would like to add that Apple Service in Kolkata *****, probably ***** all over India, simply because Apple is not a major player in this country. The service engineer at Apple Store was at a loss with my problem and after seven days could only say, "We have done our internal tests and found no problem with your Macbook." When I asked about the Sleep Mode sensor connection, he said, "That is working fine, we have checked that.")
5. After coming back home, I faced the same problem, this time with lesser time gap. It would go off to sleep every one minute or so. I decided to set my computer on "never to sleep mode" in the enery saving option. Alas, that didn't help either.
6. I redid the hardware check, only to find that my computer hasn't detected any hardware problem.
7. Now, as a previous Windows user, I thought that the problem must have been with the OS. So, at the risk of losing all my files, I decided to reload the OS. (My original OS DVD was Leopard, but it was later upgraded to Snow Leopard by the vendor free of cost). I took backup in Time Machine, and backed up the documents in another Disk and reloaded the OS. All seemed fine so far, for about 10 minutes. I was now confident that finally I could solve the problem and was then planning to migrate my previous files to my newly loaded OS-X. Alas, I was wrong. Before I could connect the external HDD to my computer, my Macbook went back to its previous trick of falling asleep.
I'll definitely take back my Macbook to Apple Care tomorrow, but with my experience here in Kolkata, don't know whether they would be able to solve anything. Last time I had to show them the posts in Apple Forum to prove that Random Sleep is a problem that happens to Macbook.
PS: My Macbook is with aluminium body bought in January 2009. Out of warranty. My optical drive conked off long ago (after about 15 months or so after I bought the Macbook) and I live with an external drive.  

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Macbook air keeps disconnecting from internet when going to sleep mode

    New macbook air keeps losing Internet connection when going into sleep mode. Have tried deleting and re adding network and adding DNS 8.8.8.8 still is disconnecting.
    Also, since Lion update 2 days ago Internet is very sluggish
    HELPPPPPP!!!

    You're not the only one.  See here:
    https://discussions.apple.com/thread/3704539?start=0&tstart=0
    The current fix is to turn off sleep mode or use an Ethernet cable.

  • Week old IMac G5, Version 10.5.2, goes into "sleep" mode randomly....

    My sister has a brand new IMac G5, OS X version 10.5.2, the screen randomly will go black, it still stays on, it's like it goes into sleep mode, but force quit wont work, nothing works, restart is required in order to get out of it.
    On another note, when she restarts the computer, and sometimes when she's just starting it up not on a restart, the computer will have colored lines running down the whole screen, when it gets to the blue loading screen, it freezes there, where once again it requires a restart. Problem is, the computer is less than TWO WEEKS OLD. I've had my mac for years and cant figure out the problem, anyone that knows of, or has had similar problems and had them fixed that could help out would be nice. Thanks!

    In fact, what your sister has is an intel iMac, not a G5, those were discontinued a couple of years ago. She has telephone support for 90 days and should call Apple immediately for a solution to her problem.

  • Macbook Pro goes into sleep mode randomly

    I have a Macbook Pro, early 2011 version running Mountain Lion. Sometimes, it doesnt matter  what I am doing but it will be running fine and then out of no where the screen will go black. I assume it goes to sleep because the sleep light goes on. It take a couple minitues for it to "wake up," more than from a usual sleep. Is there something wrong with my computer? Is there a quick fix for it? Any help would be appreciated. Thanks

    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset:
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • I have a Macbook Pro 15" that is three and a half years old.  Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?

    I have a Macbook Pro 15" that is three and a half years old.  Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
    I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
    This was my first Mac since an old Apple II GS.  After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc.  Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
    I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
    That said, any tips?
    Thanks
    It does have a crack on the left of the screen case about 3/4'' up from the bottom.  I've posted that as another question.

    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior.  Versions 1.5.1 and later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little.

  • My MacBook Pro (2 and a half years old) won't start

    My MacBook Pro (2 and a half years old) won't start up. For a long time it showed the apple logo and a load bar. When the load bar completed 7 hours later, the computer shut off and now I can't get it to start up past the first screen w apple logo. Help!

    Watch this video -> http://eshop.macsales.com/installvideos/macbookpro_13_unibody_early11_hd/ - it's for late 2011 models, too: if it looks too daunting, have an AASP do the job.
    I don't know of any websites in S. Korea but you should decide on what capacity you want (prices have plummetted for 1 or even 1.5 terabyte drives) and look for the dimensions of 2.5" x 9.5mm.
    Personally, I like HGST (Hitachi) drives - particularly the Travelstar 7K1000 (a one terabyte drive with SATA III (6.0Gbps - which your model supports) speeds.
    One thing I've been hearing a lot of positive views on, though, is the Seagate 1 terabyte SSHD (a 'hybrid' drive that uses both SSD and spinning drive technologies -> here's one at Amazon). Your machine would run much faster with one of these hybrid drives.
    Take a look at the video and decide if you can DIY. I'm tickled that you have backups - most people, it seems, don't!
    Good luck,
    Clinton

  • HT201407 new iphone 5 and 4 year old macbook, and for some reason my computer says a later version of itunes is required to use iphone to sync.  updated most recent version possible and still can not sync to iphone.

    new iphone 5 and 4 year old macbook, and for some reason my computer says a later version of iTunes is required.  So, i went to ITunes and found i have the latest version availble at this time.  iTunes say phone can not be synced because it requires a version of 10.7 or greater?

    iPhone 5 requires OS X 10.6.8 & iTunes 10.7 or greater. I suspect you're running Leopard, 10.5.8, correct? If so, you will first have to update your OS, then iTunes in order to sync your phone.

  • My MacBook Pro isn't a year old yet and would like to use iCloud. However, very apprehensive about Lion upgrade...how can I find out what I will lose if I upgrade?

    My MacBook Pro isn't a year old yet and would like to use iCloud. However, very apprehensive about Lion upgrade...how can I find out what I will lose if I upgrade?

    Ajimd33 wrote:
    I appreciate the prompt response.  Having read several threads, you can appreciate why I would be hesistant to upgrade to the Lion.  All I basically use is Office for Mac and the other basic functions such as email/calendar/address/contacts...etc. I have read horror stories about peoples stuff dissapearing into cyberspace and obvi dont want that to happen.
    That's all nonsense. Most people don't post anything if they don't have any problems. People who do have problems usually have very specific reasons for them that they have caused themselves.

  • My macbook is less than a year old. I am very careful with it, but it has developed a crack on the top lid. Is this covered by the regular warranty?

    My macbook is less than a year old. I am very careful with it, but it has developed a crack on the top lid. Is this covered by the regular warranty?
    Jo

    I had a MacBook which cracked several times over the three years I had it.  Each time it was repaired under warranty without quibble.
    I had to use Windows XP quite a lot, and though I can't be certain I think that the excessive heat generated by XP was partly to blame for the repeated cracking.  There's no doubt that OS X is "cool" in every sense of the word!

  • Netweaver after one and half year of ABAP experience...

    Hi all,
    I am an ABAPer with one and half year of experience.
    I wanted to know if its really worth to switch to netweaver after having around one and half years of ABAP experience as in india promotions are faster and one remains technical person for around 7 years only as in case i take some netweaver component at this stage i will have to start from zero .Further marketwise is there too vast difference between an ABAPer and Netwaver technical consultant as it will again take one and half year to learn new Netweaver component and by the time i will be having 3 years of ABAP experience in case  i decide to remain inABAP.
    In other words which one is better option between one and half years of Netweaver experience or 3 years of ABAP experience marketwise and careerwise.I will be really thankful if somebody can give a bit descriptive explanation in this regard.
    Thanks.
    Edited by: sandeep pande on Mar 19, 2008 7:40 PM

    Hello Sandeep,
    The market is never static , it keeps on changing, 'Change is the only constant' . Currently Netweaver platform is the platform of choice for SAP Customers and many are involved in upgrading their systems to the latest SAP Offerings.
    You should invest in Netweaver , there are several learning courses you can take up or maybe buy books and rely on self learning.
    What career you want to choose is your personal issue, however SAP will definitely phase out ABAP in the near future (maybe a decade), so its worth investing money and time now into a product which SAP has decided to go forward with.
    On the soft skill side, you can always learn project management and people management, there are several courses out in the market for the same, this will slowly progress your career and take you away to a point where underlying technology does not matter.
    Hope that helps.
    Regards,
    Siddhesh

  • Career after one and half years of ABAP experience

    Hi all,
    I am an ABAPer with one and half year of experience.
    I wanted to know if its really worth to switch to netweaver after having around one and half years of ABAP experience as in india promotions are faster and one remains technical person for around 7 years only as in case i take some netweaver component at this stage i will have to start from zero .Further marketwise is there too vast difference between an ABAPer and Netwaver technical consultant as it will again take one and half year to learn new Netweaver component and by the time i will be having 3 years of ABAP experience in case i decide to remain inABAP.
    In other words which one is better option between one and half years of Netweaver experience or 3 years of ABAP experience marketwise and careerwise.I will be really thankful if somebody can give a bit descriptive explanation in this regard.
    Thanks.

    Hi Sandeep,
    It would be better to choose what you like the most ie feel comfortable to work. If you really want to swith to Netweaver then go for visual composer it is very easy to learn and there are lot of opportunites in US with a very high package.
    It is would be best if you concentrate to become a techno functional rather than going for the Netweaver. So that you will explore more in ABAP as well as in the functional side.
    Sap runs on Business process,technology may come and go but the Business still remains like SD, MM, FI etc....
    Regards,
    Viveks

  • I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    I am seeing if I can get another battery even though I do not believe that is the issue.  It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery?  It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage).  When just sitting idle it doesn't seem to turn off until that 55-60% mark.  It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
    Any other suggestions would be helpful... and I will get back to you if a new battery helps.  Thanks!

  • Macbook spontaneously goes into sleep mode and screen off mode

    Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
    Any ideas as to how I might rectify the problem? Thanks very much in advance,
    Danny

    When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
    It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
    You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

  • Macbook pro goes into sleep mode after few minutes and won't wake up

    Since yesterday my MB pro suddenly goes in sleep mode while working and won't wake up. After reset the MB Pro goes into Sleepmode befor I get the log in screen. After resettin SMC and PRAM I can log in but after a few minutes, againg deep sleep. I'ts not a software isue I think because when I use my MB Pro's harddrive by firewire as the startup disk on an other macbook it works fine. anyone knows about this problem?

    It sounds obvious but are you sure your power adapter is ok and the battery is charged. The behaviour sounds a lot like low battery sleep.
    Press the check button on your battery pack - do you get plenty of lights?

  • I tried to update my phone and it ended up going into recovery mode. now my phone is locked bc i dont remember my old apple ID security questions, nor does the email exsist anymore. is there anyway i can unlock my phone myself or do i have to go to apple?

    i tried to update my phone and it ended up going into recovery mode. now my phone is locked bc i dont remember my old apple ID security questions, nor does the email exsist anymore. is there anyway i can unlock my phone myself or do i have to go to apple???? ANYONE SUGGESTIONS PLEASE!!

    http://support.apple.com/kb/HT5312
    -If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com.  Clicking the link will send the reset to your rescue email address (NOTE:  This is not the same address as your Apple ID email)
    -If there is no link on the page, then you didn't establish a rescue email address.  Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security.  You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
    -If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
    HTH

Maybe you are looking for

  • FREE OF COST - Purchase Accounting

    Dear all, I have one serious problem in my project. In purchase the Vendor is giving  some schemes like FREE OF COST. ie If we buy 10 items supplier is giving 1 item as Free of Cost. The issue is our client wants the Accounting Entries for the 10 ite

  • Smartform - Problem with COURIER font

    Hi All,   I assigned a COURIER font to a field in smartform. The font in the printout is not the same as font shown in Smartstyle preview. Please suggest your ideas to solve this problem. Thank you. Regards, Ramesh

  • Submit button

    I created a form in Adobe Acrobat x pro when i email the form the submit button works. Now for Bi publisher i need to reduce the size to Acrobat 5.0 or later. When i do this the submit button doesn't work. On my computer the submit button works

  • Podcast Playlist - how enjoying podcasts has become more difficult

    Okay, I'll say from the outset that I had no problem downloading and installing the new 2.1 software for my 1st Gen, Ipod Touch. When I look through these posts I see that I am actually pretty lucky that that went so well. But then I noticed this new

  • Installation errors trying to install CS6 trial on a mac

    I've tried to download and install the trial of CS6 for the past 4 hours and nothing seems to be working.  I've been looking through these forums and it doesn't seem to be helping.  I downloaded it with the assistant and I got a checksum error and it