My macbook keeps resetting

Help my macbook keeps resetting & it wont save any settings i make? also my battery (which is new wont hold any charge)

Lynette...
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller

Similar Messages

  • My macbook keeps resetting to 2008 and then won't function. Any suggestions on how to fix this?

    My MacBook keeps resetting itself to 2008.  Also the batter was fully charged when I went to bed last night and then when I picked up the computer this morning it was dead. When powered up it was on 2008 again after I had just reset it last night.  Any ideas? or suggestions?

    The time and date, as well as other settings, are kept by the PRAM battery when your machine is off.
    It sounds like your pram battery is dead and the regular power battery is dying or defective. The Pram battery replacement is difficut and best left to an Apple service provider. The Power battery is user replaceable if it is removable.
    Links to how to replace the pram battery in case you have the skills and tools needed.
    http://www.ifixit.com/Guide/MacBook+Core+Duo+PRAM+Battery+Replacement/297
    http://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+%28Santa+Rosa-Penryn %29+Replacement/689

  • My macbook keeps randomly turning off.

    My macbook keeps randomly shutting off. It is no longer under warranty. I've read all of these discussions from people with similar issues and I've tried some of the things that seemed logical. it's a late 2007 MacBook. I bought it used from a friend and they never had this issue. It was wiped clean and when I got it, after about 5 LONG uses, it randomly shut down once. I installed Snow Leopard, updated to 10.6.8, then the problem started. The fan seems to be running fine. The problem occurs weather it's plugged in or not, so I'm pretty positive it's not the battery. I've done the PRAM reset and the SMC reset.. I also took the computer apart and cleaned it. Performed the SMC reset again and it seems to be working for right now. Hopefully that's all it needed but if the problem continues does anyone have any suggestions on what it may be? Thanks.
    Extra Info:
    Model Name:          MacBook
      Model Identifier:          MacBook4,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MB41.00C1.B00
      SMC Version (system):          1.31f1
      Serial Number (system):
      Hardware UUID:
      Sudden Motion Sensor:
      State:          Enabled
    Battery Information:
      Model Information:
      Manufacturer:          DP
      Device name:          ASMB016
      Pack Lot Code:          0002
      PCB Lot Code:          0000
      Firmware Version:          0110
      Hardware Revision:          0500
      Cell Revision:          0102
      Charge Information:
      Charge remaining (mAh):          4859
      Fully charged:          No
      Charging:          Yes
      Full charge capacity (mAh):          4859
      Health Information:
      Cycle count:          247
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          275
      Voltage (mV):          12598
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Automatic Restart On Power Loss:          No
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          No
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          15
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          85
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x00a0caf9
      Charging:          Yes

    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    I hope I answered your question.
    Austin

  • I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.

    I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.  I've also installed the 10.5.8 combo update but that didn't help it.  I've tried restarting the macbook with the disc in, holding c, all that.  Why won't this work?!

    Zap the PRAM and Reset the SMC, then try again.

  • Trying to add music to my library but my macbook keeps freezing. Any Ideas?

    trying to add music to my library but my macbook keeps freezing. Any Ideas?

    From a Kappy  post
    The Three Best Alternatives for Security Questions and Rescue Mail
       1. Use Apple's Express Lane.
    Go to https://expresslane.apple.com ; click 'See all products and services' at the
    bottom of the page. In the next page click 'More Products and Services, then
    'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
    ID security questions' and click 'Continue'. Please be patient waiting for the return
    phone call. It will come in time depending on how heavily the servers are being hit.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • HT1338 my macbook keeps freezing

    my macbook keeps freezing how do i fix this problem?

    Boot from your installer dvd, recovery partition, or external bootable drive and run Disk Utility to repar/verify your drives (not repair permissions).
    Do a smc and pram reset.
    Boot in safe mode then reboot.
    See if your machine still freezes after those operations are preformed.  If so run Apple Hardware Test to check your machine.
    If AHT findes nothing then your software additions will need to be investigated.  But worry about that later.

  • Why do my sound output settings keep resetting after restart?

    Just bought a MBPro with OS 10.6.4.
    After restarting my sound output settings keep resetting to Soundflower (2ch) from Internal speakers.
    It doesn't take too much to change it, but it is pretty annoying and I'm assuming there's some obscure setting that can fix this.
    Anyone able to help?

    This fixed it on my Mac Pro. It might work on a MacBook Pro.
    Delete these three files:
    /Library/Preferences/com.apple.soundpref.plist
    /Library/Preferences/Audio/com.apple.audio.DeviceSettings.plist
    /Library/Preferences/Audio/com.apple.audio.SystemSettings.plist
    Reselect whatever sound device you want as your default in the Sound Preference Pane.
    Restart the computer.

  • Mac book pro settings keep resetting

    Hi, I am in need of anyone that can help me with my situation.
    About two days ago, when I booted up my Macbook pro, all the settings would have been resetted (dock is full of apps that I removed, exposes resetted etc).
    Whenever I would set up all the settings to how I had it, it would still keep resetting every single time I turned the computer on and off.
    Just yesterday, my Macbook also started becoming incredibly slow. The first time I boot it up, the screen would always freeze but I could still move my cursor with the spinning wheel. It requires me to manually press the power button to turn it on and off, sometimes twice.
    Please can anyone help me?

    Is your data backed up?  If not, you may need to do a data recovery.
    If your machine is under 4 years old, resetting the PRAM can help.
    If your machine is older than four years, the PRAM battery may need replacing.
    If your data is backed up, and resetting the PRAM hasn't helped, getting Alsoft Disk Warrior may work, if "Repair Disk" won't work by booting either the disc that came with the computer and running Disk Utility from the Utilities menu of the installer, or Disk Utility from the command-R boot sequence available on Macs with 10.7 or later installed.

  • My macbook keeps ejecting iLife 11 family pack

    My macbook keeps ejecting iLife 11 family pack  disk?

    The drive accepts discs but they do not mount or are automatically ejected
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    Reset the Power Manager (PMU) or System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. For example a "combo drive" can read a DVD-R and burn a CD-R however it cannot burn a DVD-R. The utility System Profiler may provide additional information regarding what media your computer supports.
    If the discs continue to not be recognized, please contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.
    http://support.apple.com/kb/ht2801

  • Why does my 15' macbook keep shutting down?

    I never had this problem till recently. My macbook keeps shutting down around the 60% mark on the battery indicator.
    I have requested for the new battery, as my battery is eligible. I'm hoping this will fix the problem.
    Also, the light on the mag-safe power cord does not stay on. If I unplug it and then plug it back in then the light will pop on.
    Has anyone encountered this?
    Could it be the 10.4.8 update?

    Try resetting the PMU (Power Management Utility)
    1. If the computer is on, turn it off.
    2. Disconnect the AC Adapter and remove the computer's battery.
    3. Press and hold down the power button for 5 seconds and then release the button.
    4. Reconnect the battery and AC Adapter.
    5. Press the Power button to restart the computer.
    Hope this works
    Brian

  • After 10.9.5 update, macbook keeps going to sleep

    After 10.9.5 update,
    1. Go to sleep
    2. Wake up from sleep
    3. After step 2, macbook keeps going to sleep per 5 to 20 seconds
    4. After restart, back to normal
    1 > 2 > 3 > 4 > 1 > 2 > 3 > 4 >...

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • System Prefs keep resetting

    I have this thing where some System Preferences keep resetting to defaults between restarts: particularly affected are Displays (switching the displays menu item off) and MenuMeters (switching all its menu bar displays off). This would happen on my old G4 Cube and my old PowerBook G4. Over the last month or so I have replaced both with a MacBook Pro and an alu-iMac, hoping the problem would go away, but it hasn't. Both new machines were set up with the migration assistant, so I suppose whatever the bad was on the old ones is still there. Where should I start looking?

    Considering that it reoccured, I would consider doing an archive and install. Since the problem was there and migration assistant was used, it'll probable continue. Delete the same preference file again before the reinstall, then immediately boot from the install disk. To bring yourself up to date quickest, use the 10.4.10 combo update.

  • Mail/Browser applications keep reseting to Default Apps

    Gents,
    After restarting my computer, the mail/internet browser/pdf viewer applications keep reseting themselves to the default applications:
    Entourage goes back to Mail
    Firefox goes back to Safari
    Acrobat goes back to Preview
    Why is this happening? it all started after I installed Acrobat Reader 8.0
    ANY HELP IS DEARLY APPRECIATED
    MacBook Pro   Mac OS X (10.4.9)  

    Hello and Welcome to Apple Discussions.
    For default PDF settings; You can use Preview to view several types of image files, including JPG, GIF, TIF, PSD, PICT, PNG, BMP, and SGI. You can rotate, resize, and crop images, and you can convert them to different file types.
    You can also use Preview to view and search Portable Document Format (PDF) files.
    Preview is also used to preview documents before you print them. In another application, choose File > Print and click Preview. Preview opens with an image showing what the printed document will look like.
    You can choose to open all PDF documents in Preview. In the Finder, select a PDF document, choose File > Get Info, click "Open with," choose Preview from the pop-up menu, and click Change All.
    To learn more about using Preview, open Preview and choose Help > Preview Help.
    For default browser and e-mail:
    Setting your preferred Internet applications
    You can choose which application opens when you click an Internet address link in a document (such as an email message), open a Web Internet Location file in the Finder, or click an email address on a webpage.
    For example, you can make Safari your default web browser and Mail your default email application.
    To set Safari and Mail as your default Internet applications:
    Open Safari, then choose Safari > Preferences. Click the General icon, and then choose Safari from the Default Web Browser pop-up menu.
    Open Mail, then choose Mail > Preferences. Click the General icon, and then choose Mail from the Default Email Reader.
    Learn how to change the default Mac OS X email and Web browser applications with Mail and Safari, in Mac OS X 10.3 or later.
    Note: If you are accustomed to using Internet preferences in earlier versions of Mac OS X, note that Internet preferences is not included with Mac OS X 10.3 or later. In Mac OS X 10.3 or later, use Mail and Safari to change your default applications.
    Choosing an email application other than Mail
    1.
    2. Open Mail (/Applications/Mail).
    3. From the Mail menu, choose Preferences.
    4. Click the General button.
    5. Choose your desired default email application from the Default Email Reader pop-up menu.
    Note: You may need to set up the email application with your email account information. This information is not automatically exported from Mail.
    Choosing a default Web browser other than Safari
    1. Open Safari (/Applications).
    2. From the Safari menu, choose Preferences.
    3. Click the General button.
    4. Choose a different browser from the Default Web Browser pop-up menu.
    Safari and Mail shouldn't be deleted

After changing your default application, you should not delete Safari or Mail, even if you do not plan to use them. You will need them if you wish to change your default settings in the future.
    Hope this helps...
    Carolyn

  • Illustrator 2014: Scratch disk preference keeps resetting itself

    Hello Illustrator community.
    I have recently noticed that in my Illustrator CC 2014 18.0.0, the scratch disk preference setting keeps resetting itself. I'm using a MacBook pro with a single SSD, but I have an external Lacie Thunderbolt SSD that I got to use as the scratch disk for Illustrator and Photoshop. The problem is that if I set the scratch preference to use the external as the primary and my startup as the secondary,  everything is fine and it let's me know that the change will take effect once it's reopened. Upon reopening Illustrator I double check and it's saved, and everything works fine. But if I happen to open Illustrator without my external attached, when I check the scratch preference,  it will revert to using the startup as the main scratch location, which I understand.  But the next time illustrator is opened with my external connected, the scratch setting is still defaulted to using the startup disk. At that point I would need to change the preference, close illustrator and then reopen to make sure Illustrator is using the external as scratch.
    So for some reason it's not saving my preference for the scratch disk, while all other preferences seem to be saved fine. In Photoshop CC 2014, I can set the scratch preference,  which works fine, close Photoshop and reopen without the external attached and then close and reopen with the external reattached,  and it will remember my preference for having the external as the primary scratch.
    Is this just the way Illustrator is meant to work, or is this possibly a bug? Anyone have experience with this?
    I used Illustrator CC 17.x.x before this but didn't notice if it operated the same way, since at that time I didn't have a dedicated scratch disk to use.
    Thank you very much, I look forward to your help and replies!

    The last thing Adobe AI does upon a quit is to write the existing state of the preferences file to disk. If it is using the local HD as scratch, then that is what is recorded in the preferences.

  • OSX keep resetting

    Hello.
    As the topic says OSX keep resetting itself. I have a MacBook, not C2D, 2Ghz with 2GB RAM. I'll describe it a lil' better below.
    It started maybe a week back. I restarted my MacBook, but when the desktop loaded the dock and the iconsizes where set back to default. I thought this was strange but just set them back as I use to have them. Though I discoverd it was more to it. All programs keep reseting themself when I started them. I could change the settings and run the program without problems, but when I restarted, it was back to default again. So I booted with the MacInstall disc and did a repair though discutility there. It found some errors and fixed them, all good. Still I had the same problem when I restarted my Mac. So I decided to reinstall OSX, after that everything worked fine.
    Until today when I got the same error, I restarted my Mac after a night's uptime. And I got the same error once again, everything goes back to default all the time.
    Though I am sick of reinstalling OSX, takes quite some time and I wanna be able to solve this problem and know why this happends.
    Anyone have any idea what could be wrong?

    Welcome To Discussions GBGSKURT!
    Did you cahnge the Short Name on the User Home folder?
    If so, info in one or more of these links will help.
    Return to Default Desktop, Apparent "Loss" of Home Directory
    My home folder and desktop are different than before
    Recover from renaming your Home folder, authored by Dr Smoke
    ali b

Maybe you are looking for

  • Reason behind the usage of Infosources in BI 7.0 versus BW3.5

    Hi Expert, As a general understanding, Infosources are very well required in BW 3.5 wherein we have to assign datasources. But in BI 7.0, transformation & DTP concepts have replaced the above old concept. But in my current project, we are using Infos

  • Final Cut Pro HD 4.5 problems with LiveType & uninstall/reinstall missingCD

    Hi there. I am actually crossing my fingers hoping that people can help me with this issue of mine. I have been using full version of FCP HD 4.5 for a long while then I moved from an apt to a new apt, then I realized some of my previous FCP projects

  • Howto bapi calls

    Hello, I am working on a scenario in which a client (abap proxy) sends a message to the integration server, which dispatches the messages to an rfc-adapter, an bapi call. Therefore I have read the tutorial, which can be found on this site, but unfort

  • How to delete old config ?

    Hello! I'm testing webutil 1.0.5 on linux server. I use this link for tests: http://server:port/forms/frmservlet?config=webutil&form=webutil_demo but i cannot connect using this... I have error: Forms Servlet Error. Missing or invalid value for baseH

  • Ability to double click on a shipment and go into VT02N.

    Hi  guru , I programmed and ALV  and  want   to  double click on a shipment line   and go into  transaction  VT02N. How  we  do  it  . FORM display_report .   PERFORM initialize_alv.   PERFORM comment_build USING gw_list_top_of_page[].   PERFORM fiel