My Macbook keyboard won't work and the computer is shutting down at random. Any advice?

I have a Macbook that is approximately 2 years old. It had water spilt on it but since then everything else is working fine.
The keyboard won't type at all, it did on the original start up after the water damage was assessed within the computer's shell. Now not at all. I'm using a USB keyboard for the time being.
Also, it shuts itself off at random. There is a dull click and the screen goes black, then when you attempt to restart it it loads a little and then it clicks and screen goes black again.
Any advice or suggestions would be greatly appreciated.
Thanks.

Hello Rach Ryan
First I would try closing the app from multitasking and then launching it again. To do that, double tap the Home button and then swipe up on the app to close it completely. If that does not work, then I would restart your iPhone.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Regards,
-Norm G.

Similar Messages

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

MacBook - bluetooth doesn't work and system will not shut down

Hi all together!
I have a problem with my MacBook with the newest updated Tiger 10.4.11: First the bluetooth went off and after using the hardware test the system sayed "no hardware problems". After this I recreated my system with the original MacOS-CD. It shut down properly but the bluetooth still didn't work (Meanwhile I've bought one of that 10 EURO external mini bluetooth adapter and it works). After updating, it did not shut down again and showed that bad "circle turning string thing". Then it went blue and nothing else happened. Sometimes it shuts down regularly but the most times I have to use the button for 5s. I don't think that's healthy for the computer. It seems that no one of my friends knows why this happens.
Greetings

Well, I can't guess for how long it has been like this. Don't take responsibility for something that isn't your fault, even if it is your friend's system. I wont. Should it be your fault I hope you tell us what measures you did trying to help.
Say what PSU you got. Model and name and specs. please.
The only case-to-motherboard connections you really need is Power. Start with getting that right according to motherboard and case manuals. You will probably not be able to see the text printed on motherboard about pin setting. And guessing will be of little help here. If you know what case it is Internet is your friend.

Hi, iPak II user. Two keyboard keys won't work, and the picture goes haywire sometimes, flashing itself, bak to old stuff, typing in the safari line, all this going on vey fast. Any fixes out there?

Hi, iPak II user. Two keyboard keys won't work, and the picture goes haywire sometimes, flashing itself, bak to old stuff, typing in the safari line, all this going on vey fast. Any fixes out there?

Sounds like it could be a hardware problem.
Try a restart or reset to see if that helps. If not, contact Apple Support.
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

IPod nano gen 4 forward button won't work, and the hold switch won't either. I've tried restoring it and it didn't fix the problem. Any suggestions?

The forward button won't work and the hold switch doesn't either. I tried restoring it, but that didn't work.

Restore to factory settings.new iPod if you have not yet already. If still problem time for an appointment at the Genius Bar of an Apple store.

(OSX 10.5.8, PowerPC 1.25 GHz) Recently, the keyboard lighting stopped working and the preferences option has disappeared. What happened?

(OSX 10.5.8, PowerPC 1.25 GHz) Recently, the keyboard lighting stopped working and the preferences option has disappeared. What happened?

Reset the Power Management Unit (PMU): http://support.apple.com/kb/HT1431#faq10 . If that doesn't do it, reset PRAM: http://support.apple.com/kb/HT1379

My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!

My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!

1. The most efficient way to charge an iPad is with the charger that came with the iPad and having that plugged into a wall outlet. Trying to charge while connected to a laptop often doesn't work because the USB port may not provide enough power.
2. Once an iPad battery has completely drained it may take an hour or more on the wall charger before the iPad responds. So after an hour on the charger reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
3. If the iPad still does not start up make an appt at the Apple store. It will be far better if you have an appointment rather than just walking in because those with appointments will be taken care of before you are.

Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
Then, wake the Mac the way you normally wake it.
Then, find the Console app - it is in your Utilities folder and looks like this
You can find it by selecting Utilities from the Finder's Go menu.
Open Console.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
Make note of that exact time in hours, minutes, and seconds.
Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
All previously displayed log entries will reappear.
Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
Copy and paste those log entries in a reply.
Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

Delete all data from following location on your machine and try updating again.
Mac OS: ~/Library/Application Support/Adobe/AAMUpdater/1.0/
Let me know if it works for you.
Regards,
Ashutosh

Adobe photoshop elements 8 causes the computer to shut down when I click; won't reinstall. Ideas?

Adobe photoshop elements 8 causes the computer to shut down when I click on it. I can't reinstall the program. Suggestions for troubleshooting? All other programs work fine.

Hi, thanks for your reply. I had installed PSE8 about 2 years ago and it had worked well until today. When ir crashed the computer, I tried uninstalling PSE8 and then reinstalling the program. No luck. T he operating system is Windows 7 Home Premium.
Vance

HT1277 my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to  > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook

Hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.

hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.an unknown error accurred (2001)

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

My ipod touch button wouldnt work and my ipod got shut down how can i restart is please help

my ipod touch button wouldnt work and my ipod got shut down how can i restart is

connect it to your computer or a power source it will automatically start

How do you prevent the computer from shutting down when in sleep mode?

How do you prevent the computer from shutting down when in sleep mode and plugged in?

Thanks tjk.
Those are great suggestions and got me looking in places I had not considered before. Unfortunately, the problem remains. The System Preferences did not have the shut down option activated and there are no parental controls active on the computer.
Any other suggestions are welcome.
Brian

Keyboard won't work and need to extract contacts from computer without unlocking phone.

Hey there!
My pearl's keyboard just recently broke and I need to extract my contacts to transfer to a new phone. Unfortunately I am unable to unlock the phone to access the files because of the keyboard. Is there any way to unlock the phone using the computers keyboard or simply bypass the password? Any help is greatly appreciated, thanks!
I am on the Wind network
Pearl 9100 w/20 key QWERTY board
I've had the phone for approx. 2 years
possible water damage to keyboard
screen/battery work, tried rebooting.
computer won't recognize device until unlocked

Hi finnmccord77,
Welcome to the Support Community!
When you connect your BlackBerry® Pearl™ 9100 smartphone to the computer, you should be prompted to enter your security password. You should be able to backup or synchronize the contacts your BlackBerry® Pearl™ 9100 smartphone using the BlackBerry® Desktop Software.
This KB article should help you set up synchronization with an email client on your computer. "How to setup organizer data synchronization using BlackBerry Desktop Software" http://bbry.lv/L2aRTL
If you are switching to another BlackBerry® smartphone, you can use the backup and restore tool in the BlackBerry® Desktop Software to backup your contacts and restore them to your new BlackBerry® smartphone. This KB article may help. "How to back up BlackBerry smartphone data using BlackBerry Desktop Software for Windows" http://bbry.lv/IWfPl0
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

My Macbook keyboard won't work and the computer is shutting down at random. Any advice?

Similar Messages

Maybe you are looking for