My macbook only runs when plugged in to the wall power source.

The battery says it is at 99% charge but the computer shuts down when I unplug the power cord. Any suggestions?

Hi, John...nice to meet u! Same problem here! Try SMC reset, nothing....This is a Macbook 13" 2006 (yeah, yeah, time for a new one...I know...but kinda tight with my budget!!!), and have the latest OS X, Snow Leopard!!!
Here the Battery information
Battery Information:
Model Information:
Manufacturer:          DP
Device name:          ASMB016
Pack Lot Code:          0002
PCB Lot Code:          0000
Firmware Version:          0110
Hardware Revision:          0500
Cell Revision:          0200
Charge Information:
Charge remaining (mAh):          4500
Fully charged:          No
Charging:          Yes
Full charge capacity (mAh):          4528
Health Information:
Cycle count:          199
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          238
Voltage (mV):          12623
By the way, that's NOT the original battery! Bought this one online, Apple store, last year. Did some hardware tests, too. First, yesterday, I got some error message after the test: 4 SNS/1/40000000: 'VCOC'
Now, today, I've just repeated the hardware test and... it was clean, test was good, no problems.
Any idea?

Similar Messages

Battery or Charger? Only runs when plugged in.

The machine only works when plugged in. When unplugged, it turns off and the time/date settings are lost. I don't know whether, or not, this is a battery issue or charger issue. Can the answer be told from this data, which I got from the machine? Thank you.
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3175
Remaining Capacity (mAh): 0
Amperage (mA): 0
Voltage (mV): 10353
Cycle Count: 207
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: No

Adding to my previous post: Running coconutBattery 2.5.1, I find the following:
Current Battery Charge: -1mAh
Maximum Battery Charge: 3175 mAh
0%
Current Battery Capacity:
Current Battery Capacity: 3175 mAh
Original Battery Capacity: 4400 mAh
72%
Battery-Loadcycles: 207
Age of Mac: 24450 Months
Charger connected: Yes
Battery is charging: No

Only runs when plugged in

My MacBookPro disconnects when I remove the charger even when the battery is fully charged. I have apple care, but i have hard a difficult time locating support. Any suggestions?

I think you have to call this number;
1-800-263-3394
Before you do, try a PMU reset. Turn the computer off, remove the battery, remove the ac adapter and press the power button down and hold it for 10 seconds.
I that helps, see how it goes. Otherwise the number above.
Best of luck.

What's wrong with my MacBook, it only works when its plugged in to the wall charger

my MacBook only works when its plugged in with the wall charger. What's wrong with it? it the problem fixable ?

Marina -
What Kappy said, or maybe your Battery charging cable is faulty, or something's happened to the input slot.
I'd take it to Apple and have them troubleshoot it for you.

Only works when plugged in

My iPad 2 was left on overnight, not plugged in with the battery at 95% last I checked. This morning it was off and I was unable to turn it on. I plugged it into the charger and it seemed to start up, but the date and time had been reset to December 31st 1969 at 4pm!!! Then, I tried to reset the date and time but it would automatically keep going back to that date. When I went to unplug it, so I could sync it with iTunes, it turned off immediately! It only works when plugged into the charger and even then it turned itself off after about 2 minutes. While unplugged, I tried a hard reset (holding the home and sleep/wake button down at same time for 15 seconds, but it doesn't do anything at all. I did notice that it was pretty hot yesterday, but didn't have any problems running it at all. Any suggestions, or is this clearly a hardware problem? Thanks in advance.

When it was plugged in, it was at 95% so that's not the issue. THe battery appears charged, but the device simply doesn't want to run on it. The weird date reset makes me think it could potentially be a software issue, but I'm worried it is essentially a hardware/battery problem.

My iPod only works when plugged into a wall socket!

Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
Any ideas??

Sounds like a dead battery. You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
B-rock

My Ipod touch will only work when plugged into a itouch radio. When I take it out, it goes blank. Why can I do?

My Ipod touch will only work when plugged into an Itouch radio. When I take it out of the charger, it goes blank. The battery shows fully charged. It appears that the battery is no longer charging. What should I do?

Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates.

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginabl

I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

7th gen Nano only works when plugged in, turns off when unplugged... battery is fully charged.

7th gen Nano only works when plugged into computer, as soon as I unplug it shuts off (it was ejected from iTunes). Battery is fully charged. Have already done a restore in iTunes and checked for updated software.

Hello there, DizDude.
The following Knowledge Base article offers up some good recommendations for troubleshooting battery issues with the 7th generation iPod Nano:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Particularly this section:
Battery life appears short
Learn how to conserve battery life.
Ensure that the latest software is installed on the iPod.
When charging, use the cable that came with iPod nano (7th generation) and leave the device connected until it is fully charged.
Note: If you are charging using your computer, don't connect iPod nano (7th generation) to your keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPod nano (7th generation) is connected to a computer that's not turned on or is in sleep or standby mode, the iPod nano (7th generation) battery may drain.
When you are done using the iPod nano, verify that:
The Radio application is off (tap the button)
Music is paused (tap the button in the iPod application or disconnect the earphones)
There is no active Pedometer session (tap the Stop button in the Fitness application)
Dimming the screen is another way to extend battery life on iPod nano. Go to Settings > General > Brightness and restore the brightness to the default, or drag the slider to the left to lower the default screen brightness.
Playing tracks with EQ requires your iPod processor to consume more energy than playing tracks without EQ, because the EQ information is not encoded in the song. To prolong battery life, turn EQ off if you don't use it. Go to Settings > Music > EQ and select Off from the list. Note, however, that if you've added EQ to tracks in iTunes, you'll need to set EQ to Flat to have the effect of Off, because iPod keeps your iTunes settings intact.
Try restoring iPod nano (7th generation) by connecting it to iTunes and clicking Restore.
Test the battery life.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My ipod only works when plugged in.

I always keep my ipod plugged into my doc and it plays fine on there and when it comes off the battery life is great. But when its off the doc the click wheel wont work and it goes idle. I tried plugging it into the wall and the pad works fine. It will oddly enough work when it has a cord plugged into the ipod but also unplugged from the all, like it has to have something in the bottom weather it's charging or no. Why wont the buttons work when something isnt plugged into the bottom of it? It's a 4th generation nano, 8g if that helps.

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's clickwheel, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod clickwheel repair" and you should get a number of results to work with.
B-rock

I get the flashing folder on booting my MacBook, but only if it is not connected to a power source.

I have an early 2008 white MacBook, running Snow Leopard. A few months ago the hard disk died, and I replaced it. Now when I turn it on (or even wake it from sleep) I get the grey screen with the flashing folder/question mark. However, when it is connected to a power source, this doesn't happen. (this is not dependent on battery as when unplugged, it doesn't start even if the battery is full)
I was hoping for advice on what the problem might be, and how I can sort it to use without being plugged in.
Thanks

Once a Mac becomes 4 years old, the PRAM chip's capacitor or battery is likely to go. This is separate from the battery to affects it on the power lines. Hopefully yours is a battery, since the capacitor is on the logicboard for those that have a capacitor, and are harder to replace.

HT1586 Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

AppleTV has no analogue connections.
It has HDMI which can go to your TV or in theory to an AV receiver equipped with HDMI inputs.
Some HDMI amps/receivers and HDMI switches can cause glitches with AppleTV but it really depends on the particular device.
AppleTV also has optical out, so if you only wanted a connection for Dolby Digital or stereo feeds from the AppleTV you could connect AppleTV to teh TV via HDMI and also run optical to the amp.
Audio is output over HDMI and optical simultaneously.
AC

Ay suggestions to connect my iPhone 5 to the Internet, it will only connect when sat next to the rooter, I have reset signals on both ?

Ay suggestions to connect my iPhone 5 to the Internet, it will only connect when sat next to the rooter, I have reset signals on both ?

What version of iOS?
Is the router running the latest version of available firmware?
Are any other devices having issues connecting to the router?
Does the iPhone have the same issue with other Wi-Fi hot spots?

My macbook only runs when plugged in to the wall power source.

Similar Messages

Maybe you are looking for