My macbook, OS 6.7, drops my wireless connection after about 10 minutes - help?

My macbook, OS 6.7, drops my wireless connection after about 10 minutes - help? The lynksys signal works on other computers/iphone but not on my older macbook.

Same problem, IMac with OSX. Everything else in the house is fine - Netfilx, pc's, radios - Mac drops the wireless after a few minutes. It sits closest to the router. Imac will be OutMac soon if no solution comes along.

Similar Messages

IPad drops L2TP VPN connection after 1 minute??

IPad drops L2TP VPN connection after 1 minute of no activity? I'm connected just fine to my sonicwall FW.

IPad drops L2TP VPN connection after 1 minute of no activity? I'm connected just fine to my sonicwall FW.

WRT54GS v7 loses wireless connectivity after 15 minutes or so

I just installed a WRT54GS v7 router to work with my cable modem. It has the latest firmware. The wireless connection seems to work for about 15 minutes or so at a time and then it stops working. I can't even get to 192.168.1.1. The only way to get it to work is unplug the router and plug it back in. Originally, I thought it was interference from my 2.8GHz cordless phone, so I unpluged it. But that still didn't fix the problem. What could be the problem? Thanks.

@mallinj
Hi,
Disconnect from Internet.
Uninstall from Your system audio drivers.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Restart Your system:
On boot press ' F8 ' and choose ' Safe mode '.
Go to Control Panel -> Devices Manager -> Network Cards
and find there Athero Wireless card. Click on it with right button of Your mouse and choose uninstall driver.
Restart Your system and this time start it in normally.
Install latest driver:
Atheros Wireless here (ver 8.0.0.238 for 32/64 bit Win7)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Why Apple Tv 2 drop Home Sharing connection after few minutes?

I just installed an Apple TV 2. Internet connection applications as Apple Store, Youtbe, etc work very well but it drops Library`s communication just after a few minutes. I`m running files like music that are in the library in a PC with Windows Vista.
I`ve been reading other discussions and have done every thing that was suggested as:
- setting Static IP address
- have set Firewall with the ports are supposed to open
- have set Port Forwarding on the router (a Linksys WRT54GS)
- have updated Network Card driver
- have updated router firmware
- turned off sleepling mode and screen saver
- restored Apple TV 2
- reset router
- installed last Itunes version
All that and possibily other things that I do not remember right now but still looseingconnection to the Library after a few minutes. I have realized first time I put a slide show of pictures with music background and the music always stops after the second music. After that you just see the message that you need to turn on the Library related to my Apple ID.
Today I did a test with a home sharing with another computer I have that runs Windows 7 and guess what: the Home Sharing worked fine!
So, my conclusion is that there is some flaw on Home Sharing when running Itunes in Windows Vista or specificly with this computer running the Windows Vista.
I have done a research and have not found anything else. So, could anyone have a hint of what is going on?
Thanks,
Ricardo

Yesterday were released the IOS 5.1 and the Itunes 10.6. I thought that updating the IOS on the Apple TV 2 and the Itunes on PC, my problems would go away. I did that but for my surprise it has NOT.
Then I had a recall that I have read somewhere a while ago about issues with the AVAST Anti-Virus and Home Sharing, that can generate connectivity issues,
In one of my first temptatives to resolve this issue I have stopped the AVAST and I still had the problem, so I left this trail of solution. But since nothing was working I decided to uninstall it. I was a little skeptical about it but gave a shoot.
To my surprise, when I uninstalled it, booted the computer and did the Home Sharing, the problem was FIXED!
That made total sense because the other computer that runs Windows 7 and I have tested before, worked fine, it runs AVIRA as Anit-Virus software.
So my conclusion is that, on my case, the AVAST caused the issue and to stop its service was not enough to diagnose the issue. I had to uninstall it, believe or not. And that the issue has nothing to do with Windows Vista OS but with AVAST.
After that, I uninstall AVIRA as Anti Virus software and, since that, the Library and Home Sharing (24 h ago) is working perfectly and I think that will stay.

Airport keeps dropping the wireless connection to my network 2 or 3 times a day.

Hi,
Since apple's recent firmware update for my macbook pro, airport keeps dropping the wireless connection to my network 2 or 3 times a day. It then searches for a network but can't find it, but if I select my network manually it connects immediately ???
Any fixes for this ..... in layman's language please!
Thanks,
Steve

It is not the router. There are a number of factors that are involved. If the router is a G/N router you may have to switch to G-Only (or disable N). You may also have a 5 GHz wireless phone or other routers in the neighborhood interfereing with the signal.
Try this:
1. Open network preferences. Take note of what IP address is assigned. Then, click Advanced.
2. Click on TCP/IP and select Using DHCP with manual address and type the IP address below that.
3. Click OK.
4. Set your Router to Wireless-G only (or disable N) and change the channel to 11 or some higher number.
This should keep it from dropping the wireless connection. It is a bug in the OS. Apple has not fixed it in 3 years.
You wireless connection will be a tad slower, but you really won't notice.
Hope that helps.
DB

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabass

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

MacBook Pro drops Wi-Fi connection after upgrading to 10.7.4

Hi
My MacBook pro Mid 2010 i7 start do drop Wi-Fi connection after i uppgradet Os X Lion from 10.7.3 too 10.7.4.
The behavior is that the network is working for a while but suddenly is Wi-Fi Signal Status completely empty. I need to go in and select the network again. Often loses MBP Wi-Fi directly, but the third time will keep the MBP signal until I restart the computer, then precessen same again.
I have tried is to delete the network and add the network for OS X also resetar (Netgear WNDR3700), and no help
Does anyone know what to do?

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

How do I keep my Ipad from dropping its wireless connection?

How do I keep my Ipad from dropping its wireless connection?
Most of the time, my iPad does not maintain a connection to the interenet via my wifi router. My PC laptop has continuous connection, so I know it is not the internet connection.
Is there a way to trouble shoot this? Can I purchase a dedicated IP Address for my Ipad? This is beyond aggrevating since internet activity is the main reason I purchased the pad.
Your help is greatly appreciated.
Poet Margo

I would suggest that you give Apple Tech Support a call and go over your settings under WI-FI and General Settings as well as your router settings etc.. There are all sorts of things I could tell you to try but this forum is not the best place to go over all the numerous settings that could be the issue. Just call them and they will walk you through the proper trouble shooting steps.

Printer loses wireless connection after some hours

Hello to all!
Printer is connected and I can see on the screen correct IP. Desktops with Win7 and Ubuntu are used. After switching on printer works properly, but several hours later its unreachable from both systems. Printer shows connection, I can see it in router web access tool, but it is unreachable. I have to switch off printer, reboot the router, then switch on printer - and it works. Not very comfort.
Does anybody know how to fix this bug?
This question was solved.
View Solution.

Hi @varspb,
Welcome to the HP Forums!
I noticed that your HP Deskjet Ink Advantage 6525 printer is losing wireless connection after some hours with Windows 7 and Ubuntu. I am happy to look into this connection issue for you!
For Linux support, please take a look at this website, http://hplip.sourceforge.net/.
Otherwise, please see the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP Deskjet Ink Advantage 6520 e-All-in-One and HP Photosmart 6520 e-All-in-One Printer Series - Prin....
Tips for preventing wireless connection issues
The following tips can help prevent wireless connection issues:
Move the printer and the computer or access point (router) closer together.
Remove any metal objects between the printer and the computer or access point (router). Objects such as refrigerators or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals farther away from the printer. Devices such as microwaves and cordless telephones can interfere with wireless transmission.
Consult the router manufacturer for updates and configuration of your router.
Make sure that your computer is not connected through a VPN. You cannot access your printer on your wireless network while connected to a VPN.
Also, please take a look at this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

No wireless connections after upgrading to leopard!

Lost all wireless connection after upgrading to 10.5 osx. Getting frustrated with the upgrade after spending two hours on the phone with apple tech and was told that it was a third party issue! Able to access wireless with security turned off, but once I set sec password (WAP) no connection. What is strange is that I can receive and send email but no browser. All other Mac's/PC's connect fine. Other mac's have not been upgrade! Does anyone have any answers???

see my post here: http://discussions.apple.com/thread.jspa?threadID=1244216&tstart=0
it might help you.

Huge drop in wireless connection speed

Hi, I've had my MacBook Pro for a month or two now, and have been connecting to the internet through airport extreme, which was working incredibly well.
All of a sudden, it's taking me 1+ minutes to load up more complex sites, perhaps about 10 seconds to load Google; occasionally safari informs me that I'm not connected to the internet, even though my signal is very strong - it happens when I'm sitting right next to my router, but if I click on network diagnostics, it tells me my connection is fine and working.
The second error message I find is "cannot find the server"
Firefox encounters the slow page retrieval issue as well (I say page retrieval because once I finally get to a site, the file downloads are at good speeds). I updated to the safari 3 beta as a stab in the dark, but if anything things got worse.
I've tried multiple channels, turning interference protection on and off on both the router and the MacBook, switching DNS server, turning my wireless security off completely, nothing I've changed is making a difference.
Has anyone got any ideas what could have gone wrong? I'm amazingly frustrated right now!
Thanks, Ed

Stats when connected to the test socket:
Connection Information
Line state            Connected
Connection time              0 days, 00:07:55
Downstream      575 Kbps
Upstream            444 Kbps
ADSL Settings
VPI/VCI                0/38
Type      PPPoA
Modulation        G.992.5 Annex A
Latency type      Interleaved
Noise margin (Down/Up)             30.7 dB / 28.0 dB
Line attenuation (Down/Up)      23.1 dB / 8.7 dB
Output power (Down/Up)           11.8 dBm / 1.7 dBm
Loss of Framing (Local/Remote)                0 / 0
Loss of Signal (Local/Remote)     0 / 0
Loss of Power (Local/Remote)   0 / 0
FEC Errors (Down/Up)   0 / 0
CRC Errors (Down/Up)   0 / 0
HEC Errors (Down/Up)   0 / 0
Error Seconds (Local/Remote)   0 / 0

Printer keeps dropping wireless connection after working for a while

My computer stops being able to communicate with the printer wirelessly even thought the printer says it is connected to the network and both the printer and computer are on the same network. What happens is I connect the printer to the network and print something from my computer. Then, after a short while, half an hour maybe, when the printer shows it is connected to the network, I try to print but my computer can't find the printer. The message say the printer cannot be found. If I go to the printer, and reconnect with the wireless connection wizard I can print. But after a short time, I won't be able to print again and have to do the wireless connection wizard again. Wireless direct is off. Don't know if that matters.

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual). This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going to the printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer Assistant, Printer Home Page (EWS). Also check your Printers Properties.
If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and 8.8.4.4 at the Alternate DNS server.
In the router: (Refer to your router manual for information)
Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
Set router to 20Mhz only, or 145Mbps depending on router.
Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your system now and helps with wireless connectivity (if you want to know why, search the web).
If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same, they must be different for all bands, even for any Guest networks.
SSID broadcast must be enabled.
Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
Power on printer and verify it reconnects to router.
Windows 7/8/8.1 Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I connect my Ipad to my desktop and it drops my wireless connection

Every time i connect my i pad to my desktop to update or sync the computer loses the wireless connection and i have to restart. Once in a while on restart if i leave the I pad connected it will let me work on the ipad and sync but most times it just loads up with no internet and doesn't find the ipad at all
Please help

Many times restoring using recovery mode will work if the device isn't being recognized in iTunes, but if you cannot get the iPad to be seen by iTunes using that method, try this first and then try to restore again.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538

Printer drops wireless connection after some time

Have HP Laserjet P1102w printer. (Serial# edited Serial Number by Moderator) (Firmware 20130703)
Windows 7(64bit)
Printer on wireless home network.
For a period of time the printer prints wirelessly and prints from EPRINT EMail address OK.
Normally Wakes itself when print received.
After some period of time,however,the printer quits responding.
It did not wake when print received.Normally wakes itself when print received.
I manually turn it back on (front panel power button) and observe the following:
The blue wireless light is on.
The blue error light is on indicating no error.
the green light also is on.
Open Control Panel(View devices and printers) on computer and it shows printer error.
Can restore normal operation by unplugging for a few seconds and turning back on.
Can also restore normal operation by turning off and back on.
Will quit responding again after some period of time when trying to print.
Tried Windows troubleshooting and HP "Print and Scan Doctor".Tells me to reboot.
How can I fix this problem?
Can't reboot by unplugging or powering off when away from home so can't use ePrint email address to print.
Can't print when away from printer when it quits responding.
Thanks for any help.
This question was solved.
View Solution.

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
   This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
   first if needed. More Wireless Printing help is here.
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
   printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
   Assistant, Printer Home Page (EWS).
3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
4. Assign the printer a static IP address, try using 8.8.8.8 for the Manual DNS server and 8.8.4.4 for the
   Alternate preferred DNS server.
In the router: (Refer to your router manual for information)
5. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
6. Set router to 20Mhz only, or 145Mbps depending on router.
7. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
8. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
9. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
10. SSID broadcast must be enabled.
11. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
12. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My macbook, OS 6.7, drops my wireless connection after about 10 minutes - help?

Similar Messages

Maybe you are looking for