My MacBook powes up , white screen chimes then starts to beep beep beep ! Please help
MacBook powers up then chimes and the beeps three times then stops then three times
Please help
Beeps are an indication the RAM (memory) is failing or has failed and needs replacing.
Read here > Power On Self-Test Beep Definition
Similar Messages
-
My Iphone 4s is 2 years and 3 months old. the battery drains very quickly, sometimes turning off once it reaches 40% if I open an app or say the camera.
I charge it more than twice a day now as the battery life is so poor.
Also, when I take a photo, the phot sometimes shows in the album, but if I click on it, it shows up as a white screen and I cannot send the photo either as the recipient gets a blank screen.
I am not super flash with technology, so please be nice!
Thank youBasic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation and possible replacement. -
White screen, not syncing with computer- tried holding buttons please help?
Please help. The screen of my daughters 4th gen ipod has frozen white. Have tried syncing the frozen ipod with computer but it is not recognised. I have treid holding home and sleep button at the same time but no change. Would be prepared to do a reset but the computer cannot recognise it. Have read various other responses to questions and am currently leaving the batteries to drain. None of this is helped by the fact that my daughter is sobbing about it in my ear! Ahhhhh
Phil, did you have a hard Saturday night? The ling you provided is for "regular" iPod, not iOS devises, You link stated:
"If you have an iPod touch, see iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows."
Philly_Phan wrote:
Have you been here?
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
Can't start macbook after a failed installation.
Have you tried holding down the power button and home button at the same time until the device turns off...then let go. Can you take a picture of the box?
-
I recently bought a Macbook Pro, this is my first Mac. I restarted it, but when it started back there was a plain white screen and then it prompted me to insert the reboot disk. Has anyone else had this problem and is there a way to do this manually like with PC's?
The new Mac's came with OS X Lion 10.7 and there are no boot disks.
Since it's so new, take it back to the Apple Store and let them deal with it.
If not you can hold Command and r (as in rotten) keys down and boot the computer.
You'll be presented with a several options, including one to reinstall OS X Lion provided you have a Apple ID, which means you have to use Safari in there to set one up. To do that you need to set up a email account with Google or Yahoo. Once you get the ID, then you can download Lion and reinstall it.
It's so stupid not having a copy of the OS on hand to perform your own repairs.
Of course Apple will be happy to sell you a $69 Lion USB stick.
Like I said, take it back to the store, and try to get your money back, that will force them to think about just giving you a replacement machine that works.
Lion doesn't work really but it can be acceptable until the patches get released. -
My macbook pro has white screen with flashing folder.
my macbook pro has white screen with flashing folder.
i called the repair services and they say its hard disk problem
so i would like to ask everyone here if the problem would be solved if i just changed the original hard disk to a ssd myself or do i realy need to let them repair for me.
ps : i dont have warrantySee A flashing question mark appears when you start your Mac. I would suggest you try reinstalling OS X.
If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help
Avoid using hand-tools or power equipment .
"My mac book did not come with dvd. Now what should i do?"
Bring it to the Apple store. They can help. -
I have a 2 ibook g4's this is the second one but I started it up and all that happens is the apple logo comes up on a white screen and then nothing happens what should I do?
Reinstall OS X.
-
My Macbook Pro Showing White Screen At startup
Macbook pro showing white screen after loading window
i think its not booting to hdd
What shoud i do??
Message was edited by: Krishnaraj7777Krishnaraj7777,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Do you get past the white screen now? -
Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Why can't I see my messages? Everytime I press the messages app, it's a blank white screen, and then it exits.
READ the article from which the question was posted and follow the troubleshooting steps provided.
-
My Macbook has blank white screen and beeps an alarm- what is happening?
Macbook crashed to white screen with beeping alarm (repeats 3 beeps at a time)- what is happening?
Usually signals memory problem.
-
My macbook pro shows blank screen when I started..help me..
My macbook pro shows blank screen when I started . (It's like in same state when power off. ) fan sound and hard disk is running. So i connected it Through external monitor via mini display to VGA cable. I can see everything on external monitor. My display of Mac needs to change? How much it cost ?? I found so many forum discussion said that if nvedia card is faulty then its happen...let me know suggestions...I given it to apple care service station n they r telling yr display needs to change its cost me a lot.. I can't afford. And can't spend that much for 3 yr old version as new versions of macbook pro is cost vice reasonable.. can I have any suggestion?
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
my sound has gone out and please don't tell me about PRAM because my MacBook keeps going to the login screen and I can't hear any start up beeps neither someone PLEASE help me
bcoady90 wrote:
My guess is a loose connection.
I suspect you are correct. I would suggest you bring it to a repair facility that may have better diagnostic tools, preferably an Apple store genius bar.
Ciao. -
I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.
You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.
Maybe you are looking for
-
Directory Caching issue with Cisco Jabber client for Windows
Hi , I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the loca
-
Satellite L600: How can I turn off the main Wireless Communication Switch?
Hello! Would be very grateful for any help....after struggling for 3 months I finally signed up here hoping to get some help. I have a new Satellite L600/ Win7 Home Premium. My questions is that I can not find where the MAIN wireless switch is in ord
-
How do I get a e-mail letter that was send in a pdf to adobe standard file so I can correct this letter
-
how do I edit an existing contact? Like to add address.
-
Echo from WordPress post not reflecting post changes
I am developing a php site on my localhost and had been successful in establishing a Dreamweaver Binding to echo content from the site's attached blog posts to respective divs on the site's php pages. All was well until today. For some reason edit ch