My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

To fix your issue is too complicated and lengthy to go into all of it here, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state, then hopefully achieve the goals you were attempting.
I advise you hire the services of a local Mac computer support technician experienced in these matters.
Have them look at your Wifi and computer backup proceedures in the process.
Good Luck.

Similar Messages

When Firefox opens , it pushes the toolbar of the screen , so I can not go back , unles I restart the computer

''duplicate of https://support.mozilla.org/en-US/questions/1036504 - locking''
Firefox opens fullscreen , I have no more toolbar , no way to get back to normal screen .

Note that the crashes article [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes#w_get-help-fixing-this-crash |explains]] how to obtain Crash IDs even if Firefox will not start. If firefox does not start in safe mode however the problem is probably not related to hardware acceleration.
You could try starting in Windows Vista's safemode.
* http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
If that does not work and it is a startup crash maybe a clean install of Firefox will help, but please post back first with how you get on trying Firefox safemode and looking for crash IDs.

I opened my MacBook Pro to a dark gray/black screen. Rebooted several times to no success. Pressed the "sunrise" button to no success. Computer only 14 months old. Any suggestions to get this puppy working?

I opened my MacBook Pro to a dark gray/black screen. Rebooted several times with no success. Pressed the "sunrise" key several times with no success. Any suggestions to fix this?

Do you have AppleCare? Even if you don't, take to the Apple store and tell them what happened. They should help even though it's a few months out of warranty. You might have to talk to a manager or different higher up.

My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process:         Disk Utility [371]
Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier:      com.apple.DiskUtility
Version:         11.5.2 (298.4)
Build Info:      DiskUtility-2980400~60
Code Type:       X86-64 (Native)
Parent Process: launchd [86]
Date/Time:       2013-11-05 03:29:41.247 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          9522 sec
Crashes Since Last Report:           29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report:   25
Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6   dyld                                    0x00007fff5fc08f7c dlopen + 490
7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

I have a problem with my macbook after i pressed the power button the screen turns blue and nothing is happening with it! What can I do? Pls helps and thx btw

I have a problem with my MacBook Pro, I pressed the power button and after that the apple noise came and the screen turned blue. What can I do and what happened? pls help & thx btw

You may find this helpful:
http://support.apple.com/kb/PH14061
Ciao.

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?

Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing.

HT201177 My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting the screen turned blue and nothing was on besides the cursor. what should I do? Thanks.

My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

My macbook shows up the apple at startup and then the screen turn blue

As I said, when I turn on my macbook, the apple appears and then the screen turns blue and stays like that.

I have a Macbook (purchased in september 2008) in India. I got a blue screen error in 2010 when it was under the Apple care protection plan. I took it to the service centre and they replaces the Logic board to sort this error. After that the blue screen error appeared in 2011, 2012 and 2013. For the past 2 years, I have taken in the macbook atleast 5 times for the same error and the service centre had been re-formatting it and giving it back to me. But the problem kept re-curring. No proper diagnosis is being given at this apple authorised service centre.
I finally called up Apple tech support, who made me give the machine back to the same centre. Techsupport asked them to perform some check measures and finally decided that the OS being installed in my machine was the wrong one.
So the Service centre installed the original one from the CDs I had.
But this is no resolution as no one is willing to comment on this service measure nor is there any assurance that this will not happen again.
I have spent more than 15,000 rupees on the repairs for the past 2 years and am fed up of this.
I came to know from an Apple source that in the US, Apple has no "repair" policy and in the event of such a case, replaces the machine.
Can anyone here guide me on this please?
I will be grateful for any and every input.
The Apple authorised service centre is TRESOR SYSTEMS in Gurgaon, Haryana, India.
thanks a tonne
Shalini

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login. What should I do?

I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
Please Help!!

Somewhat similar problem:
Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual. Drives me mad. It doesn't happen with a fresh Lion installation, nor if booted into safe mode. On the machine in question it also happens to new user accounts.
I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences. I've removed Little Snitch and PeerGuardian (no more third party kexts).
@Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
Any ideas would be gratefully received.
Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway.

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H.

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

I tried to update my ipod 4th gen. but when I came to see how much charge the screen was red and it wasnt charged and i cant use my ipod. the screen turned blue also one time, and now the apple logo comes up and its bright then dim and it stays there help

I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything, I have a child that is very ill and I have to have access to a phone at all times can someone help me? It happened one other time when I plugged it in to my to listen to music. I know it is working it said something on voice control. I tried the press the circle button and the top button but the screen only turned white?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

TS2771 i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO

i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me

it still blinking with the apple sign

My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

Similar Messages

Maybe you are looking for