My macbook pro 13 inch when start ,some noise appears ! is it normal ?

please help me . when my macboo pro 13 inch starts some noise appears . is it normal..? i want to by ear fone and external hard disk . please suggest me the brand name and shop ?

chintupintu wrote:
please help me . when my macboo pro 13 inch starts some noise appears . is it normal..?
Probably.  my macbok pro 13" is 6 months old and makes some very small noises when starting up.  For example the optical drive makes a small noise on startup, but it is very brief. 
i want to by ear fone and external hard disk . please suggest me the brand name and shop ?
How much money are you looking to spend?

Similar Messages

  • MacBook Pro Problem when Starting OS X

    Hello their.
    I'm had a serious problem with my MacBook Pro, when the OS X starting up then after 10 to 15 seconds it's shut down, when i check the hardware test it's no error at all, but I'm trying to run recovery mode, install new OS X, run the OS X, verbose mode. all this checks goes away because my Mac shutdown immediately after 10 to 15 seconds.
    please help me what is wrong on my Mac.
    Thanks for your patient.

    I'm take my Mac BookPro to Apple Authorized Service Center on March 17 - 2013 and today the Apple ASC tell me the Top Case is my problem and after the part came from outside my country via DHL it will replace and i can take it after maintenance.
    Thanks.

  • MacBook pro stuck when starting up.

    Yesterday I force quit my MacBook pro mid 09 because it was taking way too long when it was shutting down. Today when I turn it on, it stuck half way through the loading bar. I restart a dozen time and it just stuck. need some help!

    http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

  • On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373

  • MacBook Pro won't start at all - clicking noise with black screen

    Early 2011 MacBook Pro won't start: makes clicking noise after power button is held down, but no screen movement and after click, sounds like computer just stops working. Already did a SMC reset, and undid battery to try to run on charger power only. Same result every time. Also, my Apple Care expired 3 days ago. A few weeks ago had to repair a disk using Disk Utility because there was a discrepancy between how much storage was in the drive versus how much was actually being used.

    You likely have the problem that many of us 15" and 17" 2011 models are having: a faulty soldering GPU and as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0. It usually, but not always, beings with screen glitches and then gets to the point where the machine will simply not boot.
    It's  ashamed that you're not longer under AppleCare which would have, at least, got you a new logic board. A new logic board, however, doesn't usually fix the situation - only a BGA Reballing of the GPU seems to have long-lasting fixes.
    Read through a few the articles (not all of them!) and make the decision yourself - and then make the decision about whom your going to contact.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • My MacBook Pro won't start it just goes beep beep beep when I press the power button

    My MacBook Pro won't start it just goes beep beep beep when I press the power button

    Hi Csound1,
    I haven't added any RAM my daughter was using the computer then it hung so powered it down then the beeping started. Do you know if there is a combination of buttons I can press when powering up that will put me in some kind of  safe mode so that I can find out what's up, I tried pressing D when the beeping started but it didn't make a difference.
    MC

  • When trying to install os x mavericks to my macbook pro as it started to install the computer now is stuck with the OS X Mavericks intall showing and I can't get out of it or force quit?

    When trying to upgrade and install OS X Mmavericks to my Macbook Pro as it started to install the computer stopped the install and now is stuck with the OS X Mavericks intall window showing and I can't get out of it or force quit? I can not do anything else because this is stuck with this window/install screen showing. I have tried everything to get back to my regular desktop. I do not want to wipe the drive because I have photos on it that I want to save. So if there is any way to bypass this installer and get back to my regular desktop I would greatly appreciate the help.

    UPDATE*  Macbook7,1
    Mavericks 10.9.4
    8GB ram

  • My MacBook Pro beeped when I started up. Never happened before. I want to get it looked at, but I'm living in Antalya, Turkey right now. I will be in Athens, Greece until January 1st-are there any Apple stores in Athens? Please help. Thank you.

    I have a mid 2012 MacBook Pro and it started to beep for the first time when I started up today. I think it was 3 continuous beeps then a pause. It sounded like an alarm and totally freaked me out. Then I pressed the on/off button for about 5 seconds and it restarted. I was able to get online, but then I had trouble with the trackpad, which is okay now. I have AppleCare and want to take it to an Apple Store, but I'm currently residing in Antalya, Turkey. I will be in Athens, Greece until January 1st. Are there any Apple Stores in Athens, Greece that I can take it to or Antalya, Turkey???  Thank you.

    https://locate.apple.com/gr/el/

  • My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this

    My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this.My OS is OS X 10.6.8.

    Usual first things to try are a smc and pram reset.

  • My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

    My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

    If running 10.7 or later hold down Command-R at Startup.
    This should invoke recovery Mode.
    Choose Disk Utility.
    Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
    Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
    If errors, run again until it comes clean or gets stuck.
    Report any error messages.

  • Macbook pro makes a lot of noise when its is on.

    Macbook Pro makes a lot of noise when its being used. It is the sound of the processor and it gets very hot at the bottom of the laptop. Any sugestions for why this is happening? Any solutions??

    Hi p,
    The CPU doesn't make noise, so it's probably fans you're hearing, which would correspond with the heat you're feeling. Read this link to see if there's a process running too high:
    http://support.apple.com/kb/TS1473

  • MacBook Pro's fans start running at high speed when the computer is asleep. Normal?

    The other night, my MacBook Pro's fans started running at high speed when the computer was asleep. Loud enough to wake me up. And this just kept on going until I finally decided to turn the computer off. Is this normal? Is this anything to worry about?

    This is not normal.  See if a SMC reset solves the problem:
    http://support.apple.com/kb/ht3964
    Ciao.

  • MacBook Pro does t start I turned it off during start up I've tried a lot of stuff. When I hold startup my hard disk says efi boot instead of Macintosh hd

    MacBook Pro does t start I turned it off during start up I've tried a lot of stuff. When I hold startup my hard disk says efi boot instead of Macintosh hd

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If this does not work, then you will have to erase and reinstall Mountain Lion:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • MacBook Pro won't start up. Gets stuck in Gray Screen

    Ever since two days ago when I did a regular systems update of iLife, iWork and a bunch of other updates to my MacBook Pro, the thing wouldn't restart. It gets stuck in the gray screen and no apple symbol shows up.
    Just on a chance, I turned the power off and the MacBook Pro continued to start up, and was fine. I'm wondering if because I didn't update to Leopard yet, there might be a conflict due to my recent updates, or maybe one of my peripherals is causing it to stall in start up? I have my iPhone dock, External Hard Drive, Apple LCD Screen, Mac Mini Style Hub, and HP printer plugged into the MacBook Pro.
    This has ONLY started to happen when I recently updated in systems updater. It's happened 2-3 times. After I send this I will check it again, but I think I will have to AGAIN start using only the battery source and not plugged into the outlet.
    Maybe installing Leopard will fix this problem? I am getting it fedexed in a day or two.
    What could it be?
    Help!!
    Thanks,
    Lainey

    I haven't received Leopard yet, so haven't tried to install. It's when I use Software Updater. the last update is what I think is causing the stall.
    I tried something though. When it stalled this last time, I pressed the LCD on switch on my 17 inch monitor, and then the start continued. Is there maybe a driver update needed for the 17 inch monitor now that I updated some softwarevia Software updater, or is that just me being paranoid?
    Maybe the software updater installed stuff that needs Leopard to run properly. Once I install Leopard, I'll let you know how it goes. MEanwhile, I am going to try restarting a few more times.

Maybe you are looking for