My macbook pro 15" is taking lots of time to start and it shows some blueish purple screen and some graphics error please help
I have bought macbook pro 15" i7, 4gb ram, 500 gb hdd in the month of March year 2011. I have used it just for watching movies, surfing net and writing script on final draft software. Just two week back I started using final cut pro to edit my short film but suddenly the screen of my macbook turns black and it shuts down. After few minutes I pressed the start button but it took lots of time and open with blue-purple screen. It also get heat very soon. I don't know what the problem is. Please help.
Boot from the install DVD and repair the startup drive
Then run hardware test
Using Apple Hardware Test
Reinstall the OS
Last
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
BTW, this is the Mac Pro desktop forum
Similar Messages
-
Hallo guys, I have macbook pro buy march this years, now i have problem whit desktop sometime i recive green screen did some have idee what can be problem
You are still under warranty. Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.
You're both synchronizing Safari with iCloud while signed in with the same Apple ID. On one computer, sign out of iCloud in its preference pane and sign in with a different ID.
-
Closed the lid earlier on today and my macbook pro went into sleep mode. about 12 hours later i opened it and the battery was dead. Plugged the battery charger in and pressed the power button. It boots up, disc drive works and it sounds the same as it would working perfectly fine. Keyboard works and there is noise coming from the laptop when i press certain buttons like the volume etc but the screen isnt working. Unable to enter FireWire targert disc mode to fix the sleep mode files which is what i think is wrong with it but i don't have a FireWire and i don't really want to be playing around with my macbook's internal files incase i accidentally touched the wrong thing. Does anyone know what could be wrong? Should i just take it to get repaired and let a specialist repair it? Anything i should know about/be doing/not doing?
Plug it into a power oulet & then reset your SMC:
http://support.apple.com/kb/HT3964 -
Macbook Pro 10.6.8 Beeps 3 times upon start up.
My Macbook Pro (4 GB RAM) - is beeping LOUDLY 3 times when I start up. It has been performing poorly lately. It seems to have trouble coming out of sleep. It will just become unresponsive and have to restart. I took it to Apple and they kept it over night - said it had some issues that they fixed. Within a couple of days it was having difficulty waking up again but not making the 3 beeps. So, I erased and reloaded everything. It has been about a week and it started having the same issue again and today....3 beeps again. SO SAD!! It's killing my work. Any ideas?
Is it hard to do? I like to work on things but I never have worked on my computer before. Re-seating....sounds like I need to take them out for a second and then put them back in?
Since both say status "OK".. I wasn't sure what the ECC means.
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x80CE
Part Number: 0x4D34373142353737334448302D4348392020
Serial Number: 0xC149C32D
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x80CE
Part Number: 0x4D34373142353737334448302D4348392020
Serial Number: 0xC149C3E6 -
Snow leopard 10.6.3 does not boot up. Macbook pro. When I push the start button I hear a chime and then the apple logo shows up and the spinnings circle. In a little while a grey screen comes on and after that a pop up telling me to shut down and restart my computer.I have done that andit still does not work. How do I fix it.?
richardfromfort piercerichardfromfortpierce,
do you or don’t you have your MacBook Pro’s original grey installation DVDs?
If your MacBook Pro is a 2007 model, then Mac OS X 10.6.3 was not installed onto your MacBook Pro from its grey installation DVDs, but rather from a white Snow Leopard DVD. The white Snow Leopard DVD does not have any Apple Hardware Test; to run your Apple Hardware Test, you will need the grey installation DVDs which originally came with your MacBook Pro when it was new. If you no longer have those grey discs, you can contact Apple directly and purchase a replacement pair. (They’re not available in the Apple stores.) -
I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)
You would need the original installation disks or files for the Adobe software to get it onto your iMac, and having it on two computers may not be allowed by your university's licensing. Talk to whoever issued the MacBook.
As to the music, just copy it over to the MacBook, either via Home Sharing, file sharing, or an external storage medium (hard drive, USB flash drive, etc.).
Regards. -
Please can u help transferal of ALL my photos from sony xperiaz1 to macbook pro. I've tried several times but lots r still missing altho' still on mob. In hope - thanks!
I have tried all the above and nothing seems to work. Any other suggestions?
-
macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem
macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem
-
I am using a MacBook Pro. I simply cannot find a way to attach images adjusted in Lightroom as attachments and/or without massive degradation in quality. I follow the LR attach email process as specified by LR, the photos appear in the email seemingly embedded and the recipients of the email cannot save the attachment.
You are welcome. Just finished a chat session with an Apple support rep and confirmed the matte option no longer available. Seems lots has changed since I bought my 17” 19 months back:). They did say that there were after market screen films available from places like amazon
Have never used anything like that though. My wife has a 2008 MBP 15” with gloss and I can say it is a nice screen finish, you just have to be careful of lighting from behind you. All my iMacs were glossy and I did learn to compensate for the added brilliance the screen brought to the photos. The new soft proofing feature of LR5 seems to better estimate the level of brightness of the printed work, compared to past versions of the s/ware.
In any case, in my opinion you really can’t go wrong with the apple product. I bought my first iMac in mid 1999 and have never looked back. I donated that machine to a pre-school in 2008, it was running OSX version 2 or 3 I think. I did run Photoshop 7.0 on an IBM laptop for a time (windows XP). I think I had one of the very first versions of Adobe Camera Raw on that machine. I digress, sorry.
The chat representative did confirm that the 17” is out of production and I’m guessing Apple found the market for the big laptop just wasn’t there. They did mention that 17” MBP’s show up as “certified refurbished” units from time to time. Suggest you might explore that option with a local Apple store in the UK, assuming Apple has store front operations off this continent of course.
Please feel free to contact me with further questions if you wish.
Take care, Gordy -
dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps connot be installed on this computer!!!!!
what should i do
this problem started to annoy me, as am not able to edit any photo.
pls help ASAPThanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help -
Few days back I installed Autocad 2014 in my macbook pro 15" early 2012.For few days it worked fine but since last two days I'm getting graphical lag in my mac. Finger gestures and dock movement all seems to be lagging badly.Please help.I'm using mavericks
We regularly use Cocktail by Maintain software. You run the whole gamut of options but the important one is in System - Databases - Rebuild launch services. Also in Files - Caches - then clear the lot.
This is just houskeeping really but there are so many 'links' in A/cad it needs 'cleaning' -
My early 2011 MacBook Pro 15" non-glare display has developed a dark band at the edges of the screen approximately the same width as the aluminum surround. This wasn't present when the MBP was new. I'm near an Apple Store and can take the laptop in, but has anyone else had this problem?
Thanks for your input. I didn't completely flesh out what I'm seeing visually. The resolution settings are all correct for my screen. The problem is if, say, looking at the gray startup screens or a completely white full-screen image, there is a perimeter of graying, almost as if the LEDs are somehow not as bright as the rest. It's also curious that the thickness of this phenomenon is almost exactly the same as the metal bezel around the display. I will be taking it to an Apple Store for a look, as I'm also having several minor hardware problems that need to be addressed and remedied.
-
I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine. I have gone into Disc Utility to repair disc, and get the message: Error: Partition map check failed because no slices were found. I was trying to follow Melophage's instructions by going into "Terminal" and entering "diskutil list; diskutil cs list; mount" and "diskutil info disk2." Then I entered the command "sudo got show disk1." I am sure I have made the problem worse. Can you give me some help? Thank you. blelambert
Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *251.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 250.1 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *249.8 GB disk1
Logical Volume on disk0s2
7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
Unlocked Encrypted
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: Microsoft Reserved 134.2 MB disk2s1
~ belambert$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
=========================================================
Name: Macintosh HD
Status: Online
Size: 250140434432 B (250.1 GB)
Free Space: 8921088 B (8.9 MB)
|
+-< Physical Volume 7EDAFA20-FF9A-45FB-BA44-6526BB46C381
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 250140434432 B (250.1 GB)
|
+-> Logical Volume Family B47B0B40-CBF2-4D02-BFEF-182061AC6F8E
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
Disk: disk1
Status: Online
Size (Total): 249779191808 B (249.8 GB)
Conversion Progress: -none-
Revertible: Yes (unlock and decryption required)
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
~ belambert$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
localhost:/vB3z604U-dvSpES6320fHq on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
~ belambert$ diskutil info disk2
Device Identifier: disk2
Device Node: /dev/disk2
Part of Whole: disk2
Device / Media Name: WD My Book 111A Media
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
File System: None
Content (IOContent): GUID_partition_scheme
OS Can Be Installed: No
Media Type: Generic
Protocol: USB
SMART Status: Not Supported
Total Size: 2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
Volume Free Space: Not applicable (no file system)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: Not applicable (no file system)
Ejectable: Yes
belambert ttys000 Wed Mar 11 17:34 - 17:39 (00:05)
belambert ttys000 Wed Mar 11 17:33 - 17:34 (00:00)
wtmp begins Sun Mar 8 14:40
~ belambert$ ~ belambert$ diskutil list
-bash: :~: command not found
~ belambert$ /dev/disk0
-bash: /dev/disk0: Permission denied
:~ belambert$ #: TYPE NAME SIZE IDENTIFIER
~ belambert$ 0: GUID_partition_scheme *251.0 GB disk0
-bash: 0:: command not found
:~ belambert$ 1: EFI EFI 209.7 MB disk0s1
-bash: 1:: command not found
~ belambert$ 2: Apple_CoreStorage 250.1 GB disk0s2
-bash: 2:: command not found
~ belambert$ 3: Apple_Boot Recovery HD 650.0 MB disk0s3
-bash: /dev/disk1: Permission denied
~ belambert$ #: TYPE NAME SIZE IDENTIFIER
~ belambert$ 0: Apple_HFS Macintosh HD *249.8 GB disk1
-bash: 0:: command not found
~ belambert$ Logical Volume on disk0s2
-bash: Logical: command not found
~ belambert$ 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
-bash: 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C: command not found
~ belambert$ Unlocked Encrypted
-bash: Unlocked: command not found
:~ belambert$ /dev/disk2
-bash: /dev/disk2: Permission denied
~ belambert$ #: TYPE NAME SIZE IDENTIFIER
:~ belambert$ 0: GUID_partition_scheme *2.0 TB disk2
-bash: 0:: command not found
~ belambert$ 1: Microsoft Reserved 134.2 MB disk2s1
-bash: 1:: command not found
~ belambert$ ~ belambert$ diskutil cs list
-bash: ~: command not found
~ belambert$ CoreStorage logical volume groups (1 found)
-bash: syntax error near unexpected token `('
~ belambert$ |
-bash: syntax error near unexpected token `|'
~ belambert$ +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
-bash: +--: command not found
~ belambert$ =========================================================
-bash: =========================================================: command not found
~ belambert$ Name: Macintosh HD
-bash: Name:: command not found
~ belambert$
-bash: 3:: command not found
~ belambert$ /dev/disk1
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
:~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
Whole: Yes
Internal: No
OS 9 Drivers: No
Low Level Format: Not supported
~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
Volume Name: Not applicable (no file system)
Mounted: Not applicable (no file system)racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat? -
I recently bought a Macbook Pro, this is my first Mac. I restarted it, but when it started back there was a plain white screen and then it prompted me to insert the reboot disk. Has anyone else had this problem and is there a way to do this manually like with PC's?
The new Mac's came with OS X Lion 10.7 and there are no boot disks.
Since it's so new, take it back to the Apple Store and let them deal with it.
If not you can hold Command and r (as in rotten) keys down and boot the computer.
You'll be presented with a several options, including one to reinstall OS X Lion provided you have a Apple ID, which means you have to use Safari in there to set one up. To do that you need to set up a email account with Google or Yahoo. Once you get the ID, then you can download Lion and reinstall it.
It's so stupid not having a copy of the OS on hand to perform your own repairs.
Of course Apple will be happy to sell you a $69 Lion USB stick.
Like I said, take it back to the store, and try to get your money back, that will force them to think about just giving you a replacement machine that works.
Lion doesn't work really but it can be acceptable until the patches get released.
Maybe you are looking for
-
1 PC, 1 itunes account, 2 devices
I have 1PC, 1 iTunes account with 2 devices. I have an iPod Touch and recently added an iPhone 4. I do not sync automatically and know how to only select the apps I want on each device. I also know how to create playlist for each device. The prob
-
Struts Iterate around String[] property of an object
Struts 1.1 Java 1.5 Tomcat Hi, I am iterating around a LinkedHashSet containing many Product objects, I need to print out the values of the product_size property of the Product bean (product_size is also a LinkedHashSet containing string values). The
-
Hi, We are getting following errors, while changing the purchase orders. 1. We do the changes as required in ME22N and save. Success message is displayed. But, when I see the same in ME23N, changes are not made. Later I get a message in SAP inbox
-
Use of Risk Analysis Webservice without installing CUP
1)Can we use Risk Analysis (SAPGRC_AC_IDM_RISKANALYSIS) webservice without installing CUP. 2)This webservice requires request id , which we will not have untlil we create a request in CUP.Besides request id, it has user id and system id as input fiel
-
Write access for 'others' on devices - is it normal?
Hi. After a find /* -follow -perm -o+w i found a lot of writable files for 'others' including a lot of devices like /devices/pseudo/arp@0:arp and so on. Is it normal? 'others' have also access to the files: /etc/fddi.cfg # i does not have any fddi-de