My Macbook Pro (2011) has experienced a bing takeover and now will not initialize on certain photo websites. Please help.
I have corrected the bing takeover issue (but I am not sure how exactly), but now I cannot access any photo printing websites. I can pull up the websites, log in and proceed as normal. Once I select the option I want to purchase (posters, for example), the page opens and a bar appears saying "initializing". The progress stops here. The initializing bar loads to about 85% and stops. There is no activity whatsoever once it reaches this point. I have tried this on several websites. I have checked in preferences and I have no extensions active. I am relatively new to mac and I am unsure of what to do. Thanks in advance for any help.
I have this question too.
Similar Messages
-
My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. I have tried several times to get it past this point but tnothing helped.
I have an appointment at the Apple store today, but was wondering : will all of the information and files on my desktop be lost? Or is this a logic board problem?
Any help is much MUCH appricated.I'm not sure, if you're out of warrenty it'll cost quite a bit for the replacement of the logic board replacement...unless you have apple care. you could ask apple to try and recover your hard drive but i'm not sure.
-
I upgraded my MacBook Pro to OSX 10.9.4 Mavericks and now will close Photoshop and other Adobe CS6 in a few minutes. There is that other users have the same problems? How to solve them?
https://forums.adobe.com/search.jspa?q=OSX+10.9.4+Mavericks
-
When i start up the laptop, its proceeds normally with the chime and apple logo, but after that the screen goes white and nothing happens. You can hear the sound from within the machine become louder too.. Sometimes it proceeds to login fully but then there are times that it freezes whilst i am using it. It is currently working now as im typing this.. Please help
I would first try booting into Safe Mode then restarting normally. This will be a longer startup than normal in both safe mode and normal boot. That is normal.
I would then repair your drive and permissions:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the problem is not resolved, then create a new admin user account. Set this account for auto-login. Then try restarting the computer. -
Premiere pro cc 2014 just abruptly shut down and now will not open my project please help...
I am trying to open a project file that just abruptly shut down - "serious error occurred" and now my project will not open at all. I have no idea what to do other than start over completely!! Multi cam mix with camera over 1 and 15 minutes of video - hoping my work is not lost forever.
Yep that is what I had to do...Thank you for your help
-
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
Since updating my macbook pro to IO X Mavericks, my iCloud email account will not hold its password. Apple support cannot provide a resolution. Does anyone have any suggestions?
Have you tried - in Mail go to the menu Mail > Preferences.
When the Preferences Pane opens, click on the Accounts Tab.
Click on your iCloud Account to select it.
Click on the Advanced tab.
Set Authentication to Apple Token.
Close the Preference Pane.
MtD -
Updated my macbook pro mid 2009 to 10.9.4 and now it moves slow and rainbow wheels frequently
I updated my macbook pro mid 2009 to 10.9.4 and now it moves slow and rainbow wheels frequently. Is there a quick and easy fix? I tried looking online but things seemed very confusing. Any help would be appreciated.
I got a rainbow wheel when attempting to click on a pic in Iphoto. I can copy and paste the next time I have a problem but here is what I have so far.
9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.139 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.529 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:23.579 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:23.591 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:23.621 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:24.078 PM iPhoto[1588]: ICAGetDeviceList_Deprecated-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
9/16/14 2:37:24.866 PM WindowServer[84]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
9/16/14 2:37:24.919 PM WindowServer[84]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 1.05 seconds (server forcibly re-enabled them after 1.00 seconds)
9/16/14 2:37:51.737 PM Mail[567]: [<_MCLibSasl2SaslClient: 0x600001abf800> mechanism: PLAIN security layer: no] Failed to start the SASL connection
SASL(-1): generic failure:
9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.425 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.624 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.629 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.631 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.635 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.969 PM iPhoto[1597]: ICAGetDeviceList_Deprecated-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
9/16/14 2:40:58.283 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295 -
I got my Macbook Pro from another user (different apple id) and now i'm not able to update iPhoto and iMovie. What can i do?
You need to contact Apple and transfer that computer, the serial number, into your name and your Apple ID. Then you should be able to update the included Apple Apps from the App store. No need to Re-buy them again.
Caveat to the above.
If your Mac did not originally come with Lion Preinstalled, early releases of early 2011 models and older, and originally had Snow Leopard installed the original owner should of supplied the Mac OS X System Discs with the system. If that person didn't you should order them from Apple at a small fee, and don't lose them. -
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
I had my macbook pro system restored at an apple store and now my itunes can't recognize my iPhone. What should I do?
Try these: iPhone, iPad, or iPod touch: Device not recognized in iTunes for Mac OS X, http://support.apple.com/kb/TS1591
-
I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?
Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread. -
How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it? My daughter forgot the new code she put in....
What dowes the screen say? If it just say disable and gives not time to retry then you have to restore the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Adobe Photoshop Elements 11 has ended up in my thrash and now will not open i transferred it back to
Adobe Photoshop Elements 11 has ended up in my thrash and now will not open i transferred it back to applications but it will not open it says to re-install but I have lost the cd/dvd I do have the package with the serial no. can you please please help me
You have a heap of work to do before you can reinstall it. NEVER try to get rid of PSE by putting it in the trash. You must use the uninstaller. By attempting to trash it you just made a big old mess for yourself.
You will need to download and run this:
http://www.adobe.com/support/contact/cs5clean.html
Then go through your hard drive and manually dig out and trash all the bits you can find. Pay special attention to the library at the top of your hard drive>Application Support>Adobe.
Once you successfully get that cleaned up, you can try reinstalling.
You can download PSE 11 here, but you must follow the Very Important Instructions exactly, even when they don't seem to make much sense, or it won't work:
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Maybe you are looking for
-
I have multiple folders with duplicate files, i was wondering what is the best way to check for duplication based on file content even if the file name is slightly different.
-
Document for Change request Management in Solution Manager
Hi, We are setting up Solution Manager. I know service desk configuration. But I need a document on how to configure change request management in Solution Manager. Also I need a steps or a document for monitoring of EP 6.0 from Solution Manager. Than
-
White screen upon opening, tries to save index fil...
So I'm having a problem where I try to open Skype, every time it opens it shows a white screen and the background (index file) tries to resave itself like it doesn't exist and none of the text shows up. It all tries to save as html and open in chrome
-
Hallo, on Safari 4.0.1 I installed a toolbar and now I can't delete it. How can I do? Note that Toolbal folder is empty...
-
Why is my iPhoto library in FCPX?
do my clients need to EVER see it?