My macbook pro 2014 is starting to make a sound (sounds from fan) and it is getting hot, should I get it checked out?

I just bought this in August and recently I noticed a noise that would come about every now and then and then the bottom started to heat up. This is my first macbook pro (retina) and I would like to know if this is normal or I should get it checked out. Thanks.

I think it's not normal. You'd better make Genius Bar appointment.

Similar Messages

How can I tell if my fan on MacBook Pro is working properly? It seems to be running often and the laptop feels hot!

How can I tell if my fan on MacBook Pro is working properly? It seems to be running often and the laptop feels hot!

Isn't it awesome that after you spend 2500$ + on a laptop you need to also become a computer technician in order to keep it working. The fan in my MacBook Pro runs all the time and the computer is also very hot all the time. I always try to make sure it's not sitting on a flat surface that might make it run hotter. I'm running 10.6.8. Is there anything I can do to fix this? When should the fan be running? Should it run when I have more than one program running at a time? Is the MacBook Pro designed to only run one program at time? At the moment I'm watching a show via Firefox. There are no other programs running, the computer is raised off the table, the fan is running at about half the speed it usually does, moments ago the fan was going full bore. Google Browser was open, iTunes was open, text edit was open, but none of them being used - I was using Firefox and watching a movie online with browser window on fullscreen. Anyone got any suggestions? Should I just enroll into a university and begin my studies as computer technician?

My MacBook Pro has been having difficulties at startup. It sometimes locks and doesn't get past the white screen. It has also locked up several times and gotten a green stripes across the entire screen. What is causing this and how do I fix it?

My MacBook Pro has been having difficulties at startup. It sometimes locks and doesn't get past the white screen. It has also locked up several times and gotten a green stripes across the entire screen. What is causing this and how do I fix it?

You don't, take it to Apple for repair.
This might interest you if it's too old to fix.
My computer is not working, is my personal data lost?

I have never set a firmware password on my macbook pro, but when I hold down option to boot from a different drive, I get a lock, and have no idea what the password is..?

I have never set a firmware password on mymacbook pro, but when I hold down option to boot from a different drive, I geta lock, and have no idea what the password is, i am the first owner of my mac so its impossible that someone else has set the password, i have only noticed this becuae i made a bootcamp partition and installed windows onto the machine, after the installation... i shut down the comptuer and continued to use os x, days later i tried to boot into the boot camp partition again by holding down the option key on boot, but i got a window asking me for a firmware password that i have no idea of! please help me!
will

Hi macbookprowilliam, I have the SAME problem, that grey lock just appeared trolling me. I dunno the password and I wan't to sell this macbook! I need the password. Maybe it's a new malware! I don't even know how to set a firmware password and I am the only user on this computer too! I have a thread about that too: https://discussions.apple.com/thread/3926399?start=0&tstart=0
So, did you fix it or got around it? Please reply! I am desperate.
Thank you

Macbook Pro won't boot up makes clicking sound

Hi.
After upgrading to Firefox 4 on my 15inch 2006 Macbook Pro, it froze for over 5 minutes and began to make an odd repeated clicking sound. I tried force-quitting, but that wouldn't work, so I restarted it. Now it won't even boot up fully, it just makes a similar odd clicking sound (but not as frequently).
However, the grey Apple screen does appear, along with the revolving wheel. It seems very odd though, as the light at the front of the machine goes out as soon as the machine attempts to restart, which suggests that something physical may have occured to some internal hardware.
I even tried booting up in Safe Mode, but it is no different. Also, Caps lock and Number lock keys both appear to be working, so hopefully the keyboard is still functional.
Does anyone have any ideas what may have happened. My Applecare expired about two years ago, so really need some assistance if possible.
Thanks
George

First try booting from your OS X installer DVD. If the computer boots into the installer then do this:
Repair the Hard Drive and Permissions
After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
After returning to the installer reinstall Snow Leopard. This will not erase the drive. Reinstalling takes from 45 minutes to an hour or so.

MacBook Pro will not start. Begins with sound but no screen and immediately shuts off

Battery shows fully charged, mag light is plugged in and showing green light

If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.
OOW: Take your Mac to your local Apple Store or an AASP. Diagnostic testing is FREE!
=============
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which MacBook Pro model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

I am attempting to connect my Canon Pixma MG5220 printer/copier/scanner to my MacBook Pro OS 10.6.8. After loading software from Canon and attempting to print, I get the following message: NT_STATUS_ACCESS_DENIED. What can I do to fix this?

I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP. It works fine. It has been successfully installed on my network and I am able to use it with my laptop running VISTA. However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck. I can see it as one of the printer choices when attempting to print; however, I get the following message:
NT_STATUS_ACCESS_DENIED
I have been searching for answers, but nothing seems to work yet. Does anyone have any suggestions?
Thanks.

Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering.

When trying to install os x mavericks to my macbook pro as it started to install the computer now is stuck with the OS X Mavericks intall showing and I can't get out of it or force quit?

When trying to upgrade and install OS X Mmavericks to my Macbook Pro as it started to install the computer stopped the install and now is stuck with the OS X Mavericks intall window showing and I can't get out of it or force quit? I can not do anything else because this is stuck with this window/install screen showing. I have tried everything to get back to my regular desktop. I do not want to wipe the drive because I have photos on it that I want to save. So if there is any way to bypass this installer and get back to my regular desktop I would greatly appreciate the help.

UPDATE* Macbook7,1
Mavericks 10.9.4
8GB ram

My MacBook Pro will not start up - it was just on last night - what do I do?

My MacBook Pro will not start up. I used it last night and it was fine. What should I do?

Try a SMC reset.
http://support.apple.com/en-us/HT201295
Do you get anywhere in the startup sequence?
Ciao.

Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

You can try using Screen Sharing in the Sharing preferences. Or try a third-party utility such as ScreenRecycler.

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

Hi! My MacBook Pro won't start! HELP !!!

Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
Has anyone had this same problem?
All I get is white screen + grey Apple and spinning grey disk... it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
This MBP is from 2011, runs on OS X 10.6.8
I tried booting with OS X Snow Leopard CD, it didn't work! (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
When i run coomand on root# fsck -fy --> RESULT = my HD was checked and seems to be FINE!
Thanks

Please make a Genius Appointment and take it in for service.

My Macbook Pro 2014 ran out of battery while mid-slideshow. Now the slideshow won't skip through photos and I can't figure out why? Macbook Pro 2014 13-inch Intel i5 8GB RAM 128GB flash, iPhoto library is on external HDD

Macbook Pro 2014
13-inch
Intel i5
8GB RAM
128GB flash SSD,
Integrated Graphics
iPhoto library is on external HDD
I was in a slideshow, with around 1,911 photos in it. About halfway through, my Macbook ran out of battery. Now when I restarted and charged the Macbook and reopened iPhoto, the slideshow won't advance through photos, and I can't figure out any reason why it would do this.
I thought it may be corrupted, so I deleted and reinstalled iPhoto library, iPhoto itself, and disconnected and reconnected my external HDD.
This didn't work, the photos still won't advance.
I don't know any reason why this would be happening, and there is ample space on my internal drive.
I'm happy to provide more information if needed!
Many Thanks,
James

Make a few tests, James, to narrow down the problem and find out, if the slideshow is corrupted, your iPhoto Library, or settings in your account.
To test, if only your slideshow has a problem, create a new slideshow, just for testing. Just use "File > New Slideshow" and add a few photos. Does this slideshow play correctly?
If the test slideshow does not play either, create a new iPhoto Library. Use the File menu in iPhoto: File > Switch to library > Create New. Import a few photos and create a slideshow. Does it play?
If even a new library does not solve the problem, test in a different user account (see this document: Isolating an issue by using another user account - Apple Support):
This process involves creating a new user account, logging in to it, and testing for the issue.
Create a new standard or admin user account in Users & Groups preferences.
Use these instructions for OS X Mavericks.
See these instructions for OS X Mountain Lion.
See this video, or these instructions for OS X Lion.
Optional: If you have any specific files you wish to test with, copy (don't move) those items to the /Users/Shared folder in the Finder.
Log out of your current user account by choosing Log Out from the Apple () menu.
Log in with the new account you created.
Attempt to reproduce the issue you were seeing in your regular user account.
After you have completed testing, log out of the test account by choosing Log Out from the Apple () menu.
Log in as your regular account.
After you have completed all testing with the test user account, you may want to delete it. You can delete an account in the Users & Groups pane of System Preferences.
Note: Prior to deleting a test account, make sure you are completely done with it. If you have files in the Guest User you wish to keep, you should copy them to the /Users/Shared folder .
If you should find, that slideshows only play in a new user account, post back.

Just baked up my macbook pro to an external hard drive. my computer died on me and i plugged it in and rebooted it ,started time machine and finished backing up but. just wondering if thats good or should i delete and restart

just baked up my macbook pro to an external hard drive. my computer died on me and i plugged it in and rebooted it ,started time machine and finished backing up but. just wondering if thats good or should i delete and restart

I wouldn't trust that backup.
Make sure the system is connected to AC and Do Over.

My MacBook pro I got last week makes random clicking noises..

I recently got a MacBook Pro for my 18th birthday present. I turned it on and it started making random clicking noises. It doesn't do it consistently but very randomly and at weird times. Nothing in particular triggers the noise but I'm not quite sure what to do. Help?

It sounds as if your heads are bumping up against the platters. You shouldn't be hearing it and it may be an indication of drive failure. If you haven't already done so, get an external hard drive and make backups of your hard drive using Time Machine or your backup method of choice. Then take it into your local Apple Store and have them run diagnostics. Don't attempt to use Disk Utility or any other utility to repair it.
Good luck,
Clinton

My macbook pro 2014 is starting to make a sound (sounds from fan) and it is getting hot, should I get it checked out?

Similar Messages

Maybe you are looking for