My Macbook Pro always ejects any CDs, DVDs that I insert. How do I remedy this?

My Macbook Pro always ejects any CDs, DVDs that I insert. How do I remedy this?

Before taking it for repair, try a drive cleaning disk. They are US$5-15 at most computer, electronics, and office supply stores. Slot-loading drives get dirty and the inexpensive cleaning disk is the logical step before spending a lot of mony.
Case in point: A friend has an older MacBook Pro and its optical drive had not worked in years. When he took the computer to an AASP for servicing another issue, he asked about replacing the optical drive. The Service Provider said it woul cost US$140 paarts + labor to install a new one--something my friend could not afford at the time.
I loaned my friend my drive cleaning disk and now his original drive works like it did when new.

Similar Messages

  • I'm running OS X 10.6.8 on a MacBook Pro and cannot connect to the App store. How do I fix this?

    I'm running OS X 10.6.8 on a MacBook Pro and cannot connect to the App store. How do I fix this?
    I have downloaded and installed the 10.6.8 V1.1 Combo pack but this didn't fix the problem.

    Check the 'More Like This' and you may find a solution.  (The box on the right side of this display)
    Ciao.

  • I keep getting this error message "Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/MacBook Pro.sparsebundle" is already in use."  What should I do to remedy this?

    I keep getting this error message: Time Machine could not complete the backup.  'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
    How do I remedy this so it starts backing up again?

    Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
    Stefan

  • My macbook pro 2010 crashes when I open the lid. How do i fix this?

    So if I close the lid of my macbook pro and come back to after a while the screen will show but after a few seconds the screen goes black and doesn't entirely shut down as the keyboard is still lit up. This is when it occurs most often but it can also happen randomly.

    What specific model MBP do you have and have you made any hardware changes to it?  Also, has this always happened with this laptop since you got it?  If not, how long has this been going on and do you remember makeing any software/hardware changes to it right before this started to happen?

  • Whenever i turn on my macbook pro ,, mac office , powerpoint and excel starts up itself , how can i stop this from happening?

    how can stop this from turning on itself?

    Apple menu -> System preferences -> Users -> select your user, and select Login Items.  There is where automatic launching happens.   The other thing is, with Mac OS X 10.8 and later, there is a checkbox when you restart or shut down your Mac to reopen windows that were open upon shutdown.  Make sure that checkbox is unchecked.  You aren't running Classic.  You are running some version of Mac OS X on a MacBook Pro.

  • My Macbook pro wont accept any cd/dvd

    I can put any CD in there and it will just spit it back out.
    on top of that sometimes it'll even get stuck in there..
    But i'm just trying to make a CD with music on it for my brother, and it's giving me this problem. Help??

    Sounds like your optical drive may have failed,(since you mention that this happens with all discs) you can take it to an Apple store for a free evaluation, the repair is not very expensive, or you can by an external drive for cheap.
    You can try "blowing" it out with a can of moisture free compressed air.
    Something like this:
    http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive?find=super
    All the best

  • When using Imessage on my Macbook Pro, It won't let me send images. How Do I fix this?

    It used to let me send images on Imessage and they would also appear on my Iphone as I was sending them, now it doesn't work.
    Anyone have any suggestions? Thanks.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I need to Downgrade my macbook pro from 10.8.5 to 10.8.3, how do I do this?

    I have Protools and i just need to downgrade thats all.

    If you have a clone that was created with 10.8.3, then you can install that in your MBP.  Otherwise the only option is to downgrade to a prior OS assuming of course that the MBP is compatible with it.
    Ciao.

  • My MacBook Pro is spitting out my DVDs. I tried many discs and they all got spat out. Its an early 2008. The drive is a HL-DT-ST dvdrw GSA-s10n. Do I need a new drive?

    Hi.  Need some help here.  My MacBook Pro is spitting out my DVDs.  I insert them and they knock around awhile making whirring noises, then out they come.  Refuses to play them.  I've tried many.  I have an early 2008 model and the drive is a HL-DT-ST dvdrw GSA-s10n.  Do I need to get a new drive?  Thanks for any help or comments.

    My old Early 2008 MBP used to do that every now and then in the last years of its life. Got a dry-type optical drive cleaner, the kind that is a CD with 4 rows of very fine and soft bristles glued on the "business side". Memorex was the brand I got, good for 20-30 uses.  Ran it thru every time the drive acted up, never failed to restore functionality.
    Of course, the Mac would later go on and blow its logic board. And that was that.

  • HT201250 I keep receiving the following backup disk image /Volumes/Data/Niki's Mac Book Pro spamyrsebundle could not be accessed (error -1).  How do I fix this?

    I keep receiving the following backup disk image "/Volumes/Data/my MacBook Pro sparsebundle could not be accessed (error -1).  How do I fix this?  I had just updated some software and am afraid something hurt the time machine.

    See #C17 in Time Machine - Troubleshooting.

  • What can I do? my macbook pro rejcets to eject any cds or dvds I put on !!!

    what can I do? my macbook pro rejcets to eject any cds or dvds I put on !!!

    The drive accepts discs but they do not mount or are automatically ejected
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    Reset the Power Manager (PMU) or System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. For example a "combo drive" can read a DVD-R and burn a CD-R however it cannot burn a DVD-R. The utility System Profiler may provide additional information regarding what media your computer supports.
    If the discs continue to not be recognized, please contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.
    source: http://support.apple.com/kb/ht2801

  • HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

    Hi all
    I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
    So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
    I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
    But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
    btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
    PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

    I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
    I have tried the command/option-PR reset combo with no luck.
    Any ideas?
    thanks,
    -graham
    PS the specific error i got from iDVD was: The error #-2147352539 was reported…
    Message was edited by: Graham - Sonos

  • Lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

    lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

    I'm not sure how this is an iTunes issue, but anyway, other than buying the apps from the Mac App Store (note that iDVD and iWeb are not available via the App Store), the only alternative is to call Apple support and give them the serial number of your Mac. They can usually sell you a new disk set for a reasonable fee.
    Regards.

  • My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?

    My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?
    My quess is that the new software just doesn't allow the disk drive to work. I would love an explanation why this doesn't work and some help getting it to work. It's really frustrating because I get a bunch of CDs from work and never get to listen to them on my MacBook.

    Make sure the discs are free of finger prints. The optical drive cannot read a disc with smudges and dust.
    Check Finder > Preferences > General
    Make sure:  CDs, DVDs, and iPods, is selected.

  • I need to download a DVD to my new MacBook Pro but alas, no CD/DVD drive. What now?

    I need to download a DVD and some CDs to my new MacBook Pro but alas, no CD/DVD drive. What now?

    Use an external optical drive such as Apple's USB SuperDrive, or one inside another computer.
    (118366)

Maybe you are looking for

  • Open url, type in a form and repeat in safari

    I'm very new to scripting so bare with me. I'm trying to open a url, select a form or dialogue box ( not sure what they're called) enter text into it, click the submit button, and repeat in a set number of minutes. So far I've been able to open a win

  • Calling procedure in oracle forms

    Hi all,i have a procedure in the backend and when i am calling it in forms nothing happens.The procedure is syntactically correct. Procedure PROCEDURE XXC_MTL_TRANSACTIONS(v_file_number IN VARCHAR2) IS BEGIN INSERT INTO mtl_transactions_interface    

  • Buying Monopoly on a 5th Gen iPod

    i tried to buy the monopoly game using the money that is on my account buy it wants me to buy the game with a cred card. what should i do ?

  • C4400 only prints 1/3 of a photo on 4 X 6 photo paper. Filled out printer setup perfectly! Help!

    C4400 only prints 1/3 of a photo on 4 X 6 photo paper. Filled out printer setup perfectly! Help!

  • Oracle OLAP and APEX

    Hi, We have built reports in APEX using Oracle OLAP views. But these reports are very very slow as they query the views which in turn use TABLE and CUBE_TABLE functions to convert cube into two dimensional format of a table. The cube contains 10 dime