My MacBook Pro Can't see my home's wifi

I have a Mid 2010 Macbook Pro and OS X Mavericks 10.9.4
Today I tried to connect to my home wifi but the computer can't see it, I can see all the neighborhood wifi except mine,
my iPhone can see the network and can connect to it
I know it is a software problem because I can connect to my mifi router
Please help

Wireless Diagnostics - About
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Also try turning off Bluetooth

Similar Messages

MacBook Pro can't see and connect to WiFi but adjacent MacBook can

My wife and daughter both have MacBooks and can see a lot more local WiFi networks that I can on my MacBook Pro. In fact I'm using my wife's MacBook to post this topic since I can't get online with my MacBook Pro. I've compared the settings between the computers and can't see a difference. Could it be that the MacBook Pro has a "weaker" AirPort card in it or is there something I've done?
Thanks.

Yes and no.
The MacBook Pro's case is metal where the cases of the MacBooks are polycarbonate.
Since metal attenuates RF frequencies, MacBook Pros (and before then PowerBooks) have always had slightly worse AirPort performance than MacBooks (and before that iBooks.)
However the difference should not be so great as to prevent you from getting onto your local network unless it's a very weak signal to begin with.

Macbook Pro can't see iphone4 as hard disk

In Itunes everything is ok I can see iphone but Macbook pro can't see in list of devices. Help!

Not a problem, your computer won't see your iPhone as a hard disk, as such is not supported.

My macbook pro can't see or render an icon on a website that a graphic artist used to display an audio player. Her PC sees it fine.

My macbook pro can't see or render an icon on a website that a graphic artist used to display an audio player. Her PC sees it fine.

Thanks, Bob. The website is OverflowToday.com but here is an audio show page to sample.
http://overflowtoday.com/OverflowToday/?p=49
An audio player "icon" if I am using the correct term should show up under this button array:
Audio 5 minutes: Listen | Audio Download | Discussion Guide

Macbook Pro can't find my home wifi

I just got my battery replaced.. All my data disappeared. The worst thing is, I can't find my home wifi network but my neighbour wifi network is available. Pls help me fix this.
Mine is a MBP 2011.
Your help is much appreciated!

Hello, Sallyelainelee!
You may want to check the settings on your Router to make sure there isn't something in its configuration that's preventing the MacBook Pro from seeing it. If the MacBook Pro can connect to other WiFi networks OK, I would imagine that this would be the case.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Best regards,
Allen

New Macbook Pro Can't See Other Macs

My Powerbook and iMac can see each other over the network and do file transfers, but my new Macbook Pro can't. The other computers show up in Bonjour Browser, but when I try to connect to them (either via their computer name, e.g. my-computer.local, or by ip) it can't. It tells me the address is wrong. It can't even ping them, and they can't ping it. It's weird because I can access both the internet and the router settings.

After I did that Airport stopped working. The menubar icon said "Airport not configured" and there were no network interfaces in System Preferences. So I tried just putting the airport prefs back, and restarting. The same thing happened, so I had to put the whole folder back where it was.

MacBook Pro can't see Airport network but three other macs in house can

Very strange. I can connect my three iMacs (G3, G5 PowerPC and G5 Intel) to my Airport Extreme Network, but my MacBook Pro can no longer see the Network, and Airport utility (from MacBook Pro) cannot see the Airport base station (although other macs' Airport Utility can no problem). My MacBook pro can see 4 other networks (my neighbours' networks). Doesn't seem to be a problem with my MacBook Pro airport card as I can connect to the (non-Mac) wireless network at work with no problem. Am really confused (not the first time)!
Installed the latest Airport Extreme firmware last week, which was the start of the problem, as I then lost the ability to connect to my Virgin Media Broadband digital TV box, necessitating Virgin engineer visiting at weekend to connect a cable modem to the cable tv box, to which the Airport Extreme station is now attached. Had problems connecting my MacBook Pro last night, but eventually managed it. All other macs connect seamlessly. Am stumped.

I'm troubleshooting a friend's MacBook (Model ID: MacBook4,1) that is having serious Airport problems. This machine's Airport can't see ANY available networks. Sitting right next to my MacBook (identical model), hers is blind while mine can see several open and locked networks including my own Airport base station. If I choose to "Join Other Network..." and enter the network name and password for my network, her machine almost immediately gives me a "Connection timed out" error. It doesn't matter where her MacBook is, it can't see any networks anywhere.
This is a new problem as her Airport was working fine for the first few months. I've just finished making sure all software updates have been applied so she's now running the latest-greatest, but still no Airport.
This sounds similar to the problems other folks here are describing so I figured I'd add my voice to the chorus. I guess I'll take her machine down to the local Apple store this afternoon and see if they have any ideas. At this point I wouldn't be surprised if her Airport card was fried.
Calenlas

Macbook Pro can't see wireless network or connect to it, but iPhone can!?!?

ok here"s the deal:
I got my macbook pro in the states through school and it has been working fine ever since. I now just moved back home to Germany and for some odd reason the wireless network at home at my mom's won't appear in my "join network" list.
I have tried diagnostics and advanced stuff, I have even typed in the network name and password into my preferred networks list manually... still nothing. When I connect the computer through an ethernet cable it works just fine. also searched and updated all my updates in case that was maybe the issue...
here's the clue. my sister and her friend both also have macbooks (not pro's though) and both also run leopard and both of their laptops can see and connect to our wireless just fine. ALSO I have an iPhone, I purchased in the states and it can see and connect without any issues as well..
I have called the German Apple support people, but they are absolutely useless and there are exactly 2 (!!!) genius bars here in Germany. one 4h and one 6h from where I live... sighs
this is what I found in my about section, in case anybody knows what this means:
+AirPort Card Information:+
+Wireless Card Type: AirPort Extreme (0x14E4, 0x8C)+
+Wireless Card Locale: USA+
+Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.91.21)+
is it because it says "USA" and I am now in Germany? but how stupid would that be? other people that bring their American macs over don't have issues either... right???
so yeah... HELP??? ANYBODY??? PLEASE???

Hello,
I had the same problem when I was traveling with my 2009 Macbook Pro. I am on a French ship and my MacBook was bought in the US. We have a wireless gaming network to play Call of Duty on that is set up on a LinkSys router. I was so frustrated because everyone else here could connect and play without a problem. My iPhone would even connect to the network but my MacBook Airport card wouldn't even recognize the network.
It turns out that some countries use different Wifi channels. The Airport card in the US MacBook Pro is setup to only recognize channels 1-11. The European LinkSys router was broadcasting on channel 13 which is why my MacBook couldn't even see it. I changed the wireless channel on the router to 10 and now everything works great. I hope this works for you.
Cheers
P.S. - The US MBP can only recognize channels 1-11 on a standard 2.4GHz network. To see what channels your Airport Card will recognize, open System Profiler (located in the Utilities folder) and find the "Network" heading in the column on the left. Click "Airport" and it should display all of the supported channels in the info box to the right.
Message was edited by: seanwich

Macbook pro can't see NAS drive since Mavericks upgrade

Equipment:
13" Macbook pro (mid 2010) running Mavericks 10.9.4, Processor 2.4 GHz Intel Core 2 Duo, Memory 16 GB 1067 MHz DDR3, Graphics NVIDIA GeForce 320M 256Mb, Crucial SSD 240Gb, Seagate Goflex Home NAS drive 2TB, Wifi network is BT Infinity.
Since upgrading to Mavericks, my macbook pro cannot see the Goflex Home drive on the network at all. I am confident that the problem lies within Mavericks as the Goflex Home drive can be accessed perfectly on the same network using my older PowerMac, my iPad and my iPhone. Also, the NAS is accessible via the internet through the Seagate Share facility.
Can anyone help me get Mavericks to see my drive?
Any help will be much appreciated.
Thanks.

Thanks Csound1 for your suggestion but I checked that I was on the most up to date version of software. I have been successful though in establishing contact with the NAS by following the steps outlined here:
http://support.seagate.com/kbimg/flash/215555/215555_EN.swf
It means that I have to 'connect with server' through the 'Go' menu in Finder each time now and I would like to know how I can make this happen automatically each time I boot up my MBP.
Thanks.

Macbook: I can't see my home network....

I am using a Macbook as detailed in my profile. Yesterday, upon getting home from work I booted up my Macbook to find out I couldn't get on the net.
Upon further investigation I found that the Macbook could not see my home network, despite me using it the previous evening. It can see all the other local networks that it usually can, as well as the mobile modem that I am using to type this now.
All other computers on the network can see it, and looking on the network configuration screen it can see my Macbook. But I can't see it
The router is a Belkin one

Tried that yesterday - still no joy

My 13in Macbook Pro can't see a wireless network but my friends Macbook Pro can

Me and my friend both have identical 13 in Macbook Pro's except he has 250 gb and I have 350gb. Everything else is the same even the wireless card. The problem is, he can see and connect to a unsecured wireless network but i can't. Why is this ?
Our computers can see the same networks on the list but my Macbook does not see one network, the unsecured network !!!

I never said there wasn't an issue, just that blame could not be assigned based on what we know now and that there are many more people not having problems with Leopard and WiFi than those that are.
In my circle of associates I know of literally hundreds of Mac owners, of which approximately three are having WiFi issues.
I know how frustrating it is to be one of those afflicted - my stories of constant WiFi drops for the first six months I owned my MBP have been recounted in several threads.
But it's just as frustrating to read how Leopard is just plain broken when in fact I've not seen a single WiFi drop in Tiger or Leopard since February 2007.
This is also why I've continually urged people experiencing the problem to open an AppleCare case - it's only then that Apple Engineering can find the commonalities in cases where WiFi is failing and either fix their driver or notify the router manufacturer of their bug.
Are there bugs with AirPort in Leopard? Of course, and I even know of one that affects me on occasion that's known, and that's a failure to reassociate with a known network when waking from sleep. The workaround is simple - toggle AirPort off and back on - but it's a known issue nevertheless.
But each of these threads addresses an individual problem, and among the numbers of people experiencing difficulties, few report that their Mac sees no wireless networks, and that's what the advice I've given in this thread is geared towards.

MacBook Pro can't see MY wifi connection

Hi all, Ok this has been bugging me for some time now, I've had a Macbook for around a year now and have notice that with some wifi routers my macbook can't see them until I reboot the router I'm trying to find. This can be most annoying and is beginning to become a problem, my iphone and ipad can see the wifi router but my Macbook can't unless I reboot the router and then I mostly get a connection (although this is getting worse as i have to reboot the router more often) but if I leave the connection i.e turn off the MB or leave the house on returning I have to reboot the router to get connected again. I have made a few enquires in web search engines but haven't found anything of much help and the problem is still here. At first I thought it could be my router but this has happened on a few routers of friends that I have tried to connect to, although i can see lots of other connections so it shows that the MB can find routers but not all. Is anyone else having this problem or does anyone know a way to fix this?
Cheers

Hi guys,
I personally figured it out on why this problem occur, well let me just hit to the point.
What happens is that the router of the wifi channel is being changed automatically or someone might accidentally changed it. MBP can't detect wifi from certain wireless channel. So, we have to change the channel of the router wifi channel that may be detectable by your MBP.
THE SOLUTION -
1. Connect to the wifi from a active device to the router wifi that your MB can't detect or use Ethernet cable to get connected.
2.Once connected, access to the router wifi menu by entering the ip address on your net browser, eg:192.168.2.1
3.Then go to wifi setup or menu, and you may come across the wireless channel.
4.Switch the channel from any numeric to numeric that the router wifi can make your MB detect it.
eg: Wireless Channel - 6 (change it to -->) Wireless Channel - 11
5.Save the settings for the router wifi, exit, restart your MB and HAVE FUN!

New MacBook Pro - can't see existing Apple TV

I've just taken delivery of a new 17" MacBook Pro. I have run Software Update and so it is now running 10.4.10. The new machine replaces a 17" G4 PowerBook.
I had the PowerBook syncing nicely along with Apple TV. Upon arrival of the MacBook Pro, I used to Setup Assistant to transfer all of my files and settings from the PowerBook. Upon opening iTines on the MacBook Pro, the new machine doesn't seem to be able to see Apple TV. For example, the 'Sync Apple TV' function doesn't seem to appear amongst the menu options, and Apple TV doesn't appear in iTunes as a device.
What do I need to do to make the MacBook Pro see and sync with the Apple TV as my PowerBook did?
Many thanks

Sorry if it's obvious, but have you one through the steps of connecting to a new itunes library (pass code etc)

Macbook Pro can't find Canon MG6350 via wifi

Macbook Pro purchased earlier this year and running OS X (10.9.1) can no longer find my new Canon MG6350 printer via wifi. Printer can also not be found by other new Macbook Pro, iPad Air or iPhones.
I have reset Canon printer, Macbook Pro printer system, downloaded latest drivers, tried inputing Canon printer IP address. Nothing works permanently. I temporary resolved issue by re-enabling Boujour on Canon printer settings, which magically allowed printer to appear on all devices, but this "fix" has now stopped working. Can also see all devices on BT Home Hub 3 when logged in as administrator.
I can print via USB, but want wifi printing to work. Very frustrated, as it worked brilliantly before latest OS X / iOS upgrades. Any suggestions or help appreciated.

Thank you for your interest Clinton.
Yes of course the printer connected to the wifi network. I can see all devices including the printer when logged on as Administrator on the BT Home Hub. I have also reset the Hub itself several times and reconnected all devices.
Note that I had no problem setting up the printer and all devices wirelessly on the network previously, and that this exact setup was working for months brilliantly and without issue until roughly the time I upgraded to the latest releases of OS and iOS on all my Apple devices.
I have also reset the printer to its factory setting several times, reconnected all devices to the network numerous times and have spent roughly four hours trying everything I can think of on both the printer and Mac to no avail. Hence my post. And yes all devices have the latest drivers as indicated by Apple and Canon.

My macbook pro can't see wd passport 1T

Hay!
Can anyone help me please, because I'm desperate.
I have for few months a westeren digital passport 1 T. It works fine till yesterday. I plug in my macbook and it didn't show in finder. Then I check in "disk utility" and after verify disk it appear in "disk utility" and I have think it will be ok. In that finder window "disk utility" I open my wd passport, but today when I plug it in my macbook - again it didn't recognize it. I look in "disk utility" but with no result.
I looked at other topics but I didn't find with anyone the same problem.
So I asked you again and pleas help me to solve this problem.
Thank you
Edi

If the port to which you are connecting the drive (is it a USB port?) works OK when you connect something else to it, such as a flash drive or a printer, but the external drive does not appear in Disk Utility when connected, then the drive has failed. Is it still under WD's factory warranty? If so, return it and hope its replacement will last longer, though I have my doubts about that. If your drive is out of warranty, read on.
Western Digital's external drive enclosures and the bridge chipsets in them are pure junk, and the failure may very well be in the bridge chipset rather than the drive itself. If you extract the drive from its enclosure and mount it in a good one from a reliable vendor or connect it directly to your Mac with an adapter like the one below, it may be detected by Disk Utility. It may even work perfectly again. If it doesn't, well, live and learn: don't buy any more WD external drives.
Bare-drive USB adapter:
http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/

My MacBook Pro Can't see my home's wifi

Similar Messages

Maybe you are looking for