My Macbook pro charger has frayed. Is this covered by the warranty?

Basically, my mac Charger cable has burned/frayed near the large white unit, and I was wondering if this is covered by the warranty? My warranty ends in a few days...

Bring the unit into an Apple store genius bar for evaluation.  Only they can give you a definitive answer.
Ciao.

Similar Messages

  • My Macbook Pro charger has a fault. It blows the fuse when I plug it into a wall socket without being connected to the laptop. is it covered under warranty? I got it in December 2013

    my Macbook Pro charger has a fault. It blows the fuse when I plug it into a wall socket without being connected to the laptop. is it covered under warranty? I got it in December 2013

    Did you purchase Apple Care prior to your 1 year warranty expiring?

  • I have an iphone and i took notes on it today and i want it to appear on my macbook pro. how do i do this. i think the phone is under a yahoo account and my computer is under something else. how do i log out of the yahoo acct and into the other.

    i have an iphone and i took notes on it today and i want it to appear on my macbook pro. how do i do this. i think the phone is under a yahoo account and my computer is under something else. how do i log out of the yahoo acct and into the other.

    Create a new user account on the computer that he can log in to.

  • Powercord not working. is this covered in the warranty??

    just a few minutes ago the light on my power cord stopped lighting up. if i wiggle the cord around in one place the light goes on for a second. so in other words, i need a new one. is this covered in the warranty that comes with the mac when i bought it?? the warranty is still valid but i dont have the extended one. what number do i call to report this??
    plzzzz help!!
    thanx

    Yes, it's covered - here are contact numbers for AppleCare. Note that it may not be the cord that's at fault, though, it could be a power connector within the MacBook. Apple will probably send you a new cord (and a box to return the old one) to test whether a replacement works.
    Matt

  • MacBook Pro Charger not working, end of cord before the magnet part got detached from it.

    for past an hour, my MacBook Pro charger stopped working so took the charger off and tried to fix it a bit by fixing the corn and straightening it or something.. Suddenly, the end of the cord, just before the magnet part, got detached from the magnet part with the pins and all.
    i Tried to attach it back, and even if it did enter, I don't think it would continue to charge..
    Is there anyway to fix this? Or do I have to get a new charger (which has to be my last resort, because I don't want to have to repair it by removing parts etc etc, or really pay money)

    LeoSayOh wrote:
    Is there anyway to fix this? Or do I have to get a new charger
    No and yes.  A new charger is in your future.
    Ciao.

  • I droped my I-touch and cracked the screen, is this covered under the warranty ?

    I droped my I-touch and cracked the screen, is this covered under the warranty

    No
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself
    iPod Touch Repair – iFixit

  • Is this covered under the warranty?

    A month ago my iPhone was stolen. A teacher just confiscated it from the thief. However the glass on the screen and back were destroyed, but the LCD still worked. The battery was dead and when I tried charging it, it wouldn't. Is repairing this or getting a new one covered under the warranty?

    No. Only manufacturing defects are.
    (66481)

  • If my macbook overheats playing wow, will that be covered by the warranty if any damage occurs

    will any damages be covered by the warranty if it overheats during a game?

    Of course. As it's not an accidental damage (you didn't do anything special to make the MacBook fail), it's covered by warranty.
    It's normal that the MacBook overheats while playing games because they require CPU and GPU, and those are the parts that more heat generate. You can set a higher fan speed with smcFanControl while playing these games to keep the MacBook cool

  • Macbook Pro charger has dim green light

    My macbook pro (late 2009) model has a dim green light on the charger. I took the back panel off, unplugged the battery from the motherboard, plugged in the charger, the turn on chime sounded. I unplugged the charger, plugged the battery back in and the computer came back on.
    My problem is that its sitting on a 0% charge and the charger still has a dim green light! Help!!!

    Hello PcktRckt37,
    Thanks for using Apple Support Communities.
    I'd like you to reset the SMC as is outlined in the article below to try and resolve this issue of your battery not charging correctly.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Take care,
    Alex H.

  • Macbook pro charger has died again?

    I was on my laptop this afternoon, with my mom and her friends cleaning the garage right next to my room, and someone messed with the power, turning it off in the house. They did this a few times. My charger was plugged into my laptop and the wall when it happened, and then it just stopped charging. No LED light either. Completely dead? What steps can I take to make sure it really is dead before having to replace it? I already replaced a dying one once, which only lasted me 6 months. I think I've had this one for six months too. The other one died out slowly though, while this one just suddenly went poof.
    It's an "L" Style connecter. I noticed they last shorter than the older, "T" style connectors :/ I don't wanna waste another 70 bucks. Would they replace it free?
    And I am using a 13" macbook pro

    Hello PcktRckt37,
    Thanks for using Apple Support Communities.
    I'd like you to reset the SMC as is outlined in the article below to try and resolve this issue of your battery not charging correctly.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Take care,
    Alex H.

  • Macbook pro charger melted!!??? the pin and the contact are bust

    my sister has a macbook and the plastic around the two pins on either side of the (mid 2010 new design) charger, and the plastic around the two outer contacts on the notebook melted and went black, and the pins sunk into the structure of the charger. My sister started to use my charger (which i think is the same charger or similar charger), i dont know what happened to the charger, but when i used it with my Macbook Pro the same thing happened, only this time it was with one of the pins on my charger, and the corresponding contact on my macbook. The Macbook Pro still charges, haven't checked the Macbook, but i dont want to charge anything at the moment - just incase i cause more damage.
    Can someone please tell me what's going on and why this is happening, and how i can fix it. Is it a hardware problem with the charger? the notebooks? both? maybe a software problem - a virus causing it to happen? maybe there's a problem with mains? maybe the fan doesn't work properly and the laptop heats up and melts the port? really need to sort this out - before i start university again this september. I want to have an idea of whats happening or to rule out any illegitimate reasons before i decide to go to the apple store. I find it strange that it happened to both our notebooks.

    The genius Bar is well-equipped to deal with Physical problems like this. Take all your gear to them and have them diagnose the problem. No charge for the evaluation, in warranty or out-of-warranty. But they are crazy-busy so DO make an appointment.

  • My Macbook Pro screen has failed. [2007] part of the bad group of screens. What are my options here?

    Hello,
    Would appreciate any suggestions regarding replacement of my Macbook Pro 4.1 screen.
    It has become blurred and I am told Apple no longer supplys parts for this model.
    Thank you

    OK, so I think I solved my issue.  It was caused by the system not going to sleep (The screensaver thing was a dead end).
    When I ran the console app pmset, I got something like this:
    ➜  ~  pmset -g assertions
    12-06-29 9:11:06 AM EDT 
    Assertion status system-wide:
       PreventUserIdleDisplaySleep             0
       CPUBoundAssertion                       0
       DisableInflow                           0
       ChargeInhibit                           0
       PreventSystemSleep                      1
       PreventUserIdleSystemSleep              0
       ExternalMedia                           0
       DisableLowPowerBatteryWarnings          0
       EnableIdleSleep                         1
       NoRealPowerSources_debug                0
       UserIsActive                            0
       ApplePushServiceTask                    0
    The process that was causing PreventSystemSleep to be 1 was "org.cups.cupsd" which is the print service.  So I checked all my printers, one of them was "In Use".  When I opened it, there weren't any jobs listed.  I went through the options and selected Jobs > Show Everyone's Jobs and sure enough there was a job there.  I deleted it and everything seems to work now.
    The odd thing is that print job was probably from my other account which didn't seem to have this screen problem.  Anyway, I hope this helps anyone out there....

  • Bought my Macbook Pro on august 14, 2012. Why is the warranty expired before that date?

    Bought it from an authorized reseller, and have proof of purchase. Will this make my warranty still valid til august 14 2013? Can i still buy the extended Apple care? Cuase my Macbook just died on me

    Checked if the warranty had expired onn the link you posted:
    https://selfsolve.apple.com/
    It says it has expired, i will contact the reseller when i go home from work. But still, i have all my proofs of purchase, shouldn´t that be enough to validate my warranty at an Apple store?
    Or should i contact Apple for that matter.
    By the way, Thanks.

  • Macbook Pro Charger cord breaking/short despite my following the care process?

    Despite my following the care process this is my 2nd 85 Watt Magsafe adapter to go bad and has a short in the cord after the adapter. I ensured I kept the cord uncluttered / not tangled up in open area / wrap accordingly (manual on how to care for magesafe adapter) when not in use. At work I keep the adapter on the desk. I have had my computer for 3 years without issue with the exception of having to purchase an $80.00 adapter cord a year ago. Now I have to purchase another within a year & half time. This isn't right.
    Can some one provide insight on how to address this (replace without having to pay for another cord).
    I bought it from best buy. I will try and locate my reciept. 

    You probably need to replace the two-prong attachment with the three-prong extension cord, which should have been included with the charging cable.  That adds length, as well as grounding the adapter, which is safer anyway.

  • HT204053 have a macbook pro wife has iphone and mac mini problem the itunes account for all itunes is mine but i am unable to use icloud heres is the only sign on fcor icloud alowed i wish to have a differant one and i cant seem to get one

    how do i get my own icloud rather than share my wifes it is my itunes account

    but icloud refuses unless i use the tick***@whatever it is i dont want to use that it is her email address  understand what i say.
    You need her to sign out of your account using the button with sign out written on it.
    Then sign in using her account details. If she doesn't have an account, use the create Apple ID link in the set up window.

Maybe you are looking for

  • NI-DAQmx 8.8 does not work properly after upgrade to LabVIEW 8.6

    Hi, I just upgraded to LabView 8.6 from version 7.1 and found out that the NI-DAQmx 8.8 drivers do not install correctly, since there is not Measurement I/O tab in the Functions palette (see attached document). The curious thing is that I can see all

  • Adobe Reader will not save or show the Save dialog

    Hello, we use adobe reader a lot where I work, mostly with filling out pre-made "Form" type PDF's and saving them in customer folders on the server, as of last friday my adobe reader will not allow me to save pdf's, I have attempted to edit and save,

  • Contact Pictures Missing

    I have a 4 year old that will pick up my phone when im not looking. Im not sure what happened to my contacts however, all my pictures to my saved favorites contacts and a lot of additional contact pictures are missing. I had them synced with Facebook

  • Actiontec router for a Netgear n300

    Anyone have a revision F Actiontec router they are not using or need a different router now? I have a Netgear N300 that was hardly used and need an actiontec  revison f to use as an access point that I am willing to swap for. I live in Suffolk County

  • Can not wake up normally after sleeping too long

    G5 with 23inch cinema LCD, Geforce 6600LE video card if only sleep within 1 hour, it will wake up normally by moving mouse. if more than 1 hour, the desktop will show but just last 2 seconds. and the display turns dark for 10 seconds and turns blue f