My macbook pro doesn't recognize my cameras

I have a 13 months old macbook and it won't show my fuji S5 pro camera when connected by usb cable. Even after I installed the cameras driver, the macbook still doens't reconize it. It just doens't show on the screen. Now I put my memorycards in a card reader and I bypassed the problem. BUT the other day I tried to connect my SONY handycam model DCR-TRV25E, using the Firewire 400 and guess what: my laptop doens't show the camera on screen. Accoring to the manual my macbook should recognize the camera without installing a driver. Both the Fuji and the Sony are reconized by my PC.
Now this is the second device that my macbook doens't recognize, what is the matter and can anybody help me solve this problem? Thanks very much!

I have the same problem did you get the solution and if so what was it Thanks

Similar Messages

  • Why doesn't my MacBook Pro doesn't recognize my cameras or iPhone when I plug those in at a USB-port?

    Even installing the Nikonsoftware of my camera didn't work. I've no problem connecting those equipments to my netbook with windows, but my Mac doesn't recognize either of them.

    Check to see if the Mac sees them at all by opening the utility "/Applications/Utilities/System Information"
    Then select "Hardware > USB" (on the left).  You can refresh the view by selecting the menu item "File > Refresh Information" or typing <CMD>+R.
    Your should be able to see the devices in this list which will confirm hardware works-- USB ports are good, cables etc.  If you have installed the software try restarting.  Also try OTHER usb ports on the notebook.
    After that try re-installing the drivers AFTER you make certain they are released for your version of the OS.

  • Macbook Pro doesn't recognize Flip Mino camera in USB port after Yosemite upgrade

    Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.

    I don't use FLIP, but if you get no other help here,
    consider the following ideas.
    If neither restarting your Mac
    nor reinstalling OS X fixes your
    problem, you might find some
    help if you search or post in the
    CISCO forum where Flip users post.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Macbook pro doesn't recognize camera on image capture

    My MacBook Pro doesn't recognize the built-in camera for a lot of my applications, including Image Capture. It doesn't show up anywhere in my system preferences. Any idea why this is so?

    (1)  Mac's built-in camera does not work with Image Capture.
    Image Capture works with external devices like scanners, some iOS devices, some cameras and RAM cards, etc.  Click this link for more info about Image capture and some of the apps that can work with your inbuilt camera.
    Click here for info about how to use Image Capture to transfer images from a connected external camera.
    For more info about Image Capture functions, see Image Capture > Help on your Mac or the Apple pages in this link.
    (2) To test for application-specific problems mentioned in the "How to Troubleshoot iSight " article, use apps like Photo Booth, QuickTime Player, iChat, FaceTime, or others intended to work with your Mac's inbuilt camera.
    (3) To test for user-specific problems mentioned in http://support.apple.com/kb/HT2090 the "How to Troubleshoot iSight " article, you must have more than one user account.  Do NOT use the "Guest" account.  Click this link if you need help creating new accounts for testing.
    Message was edited by: EZ Jim

  • Macbook Pro doesn't recognize audio cd's after Yosemite upgrade

    After completing the upgrade to Yosemite, my Macbook Pro doesn't recognize purchased audio cd's.  Help!!

    hi russeel!
    when i first upgraded to 5.0.1.4 i panicked for a while looking for that tab (and the Burning one) ... the subtab that i find kind of strange is "Advanced-General". Generally Advanced? Not Tremendously Advanced?
    okay, we've gone up a
    b lot
    of versions in your case (nearly as many as it is possible to go), so we'd probably better check through some of the usual suspects. let's start off with this document:
    http://docs.info.apple.com/article.html?artnum=93444
    and these resources might be useful:
    http://docs.info.apple.com/article.html?artnum=300252
    toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
    keep us posted.
    love, b

  • Macbook pro doesn't recognize internal speakers

    my macbook pro  doesn't recognize internal speakers and there is a red light inside the headphone port.  How can I get the speakers working again?

    In addition to what dominc23 suggests, you may try jiggling a toothpick or cocktail stirrer in order to trip the internal switch.  If all fails, the Apple store genius bar is you last resort.
    Ciao.

  • Macbook Pro doesn't recognize iPhone 4Gs

    Macbook Pro doesn't recognize my iPhone 4Gs
    My Macbook Pro 15 (Mac OS X 10.6.8) doesn't recognize my iPhone 4Gs (iOS5.1)
    Suddenly it stopped, last time was April 11 via Wi-Fi.
    Now even with the device plugged it can't be recognized.
    On iPhone Settings, the "iTunes Wi-Fi Sync" tab is grayed.
    Few days ago iPhone started to behave strangely, refusing to power off, sometimes not charging when plugged to USB port, sometimes does.
    Don't know what to do.
    Thanks in advance
    best

    What kind of phone is this? an iphone 4? or an iphone 4S? ( note there is no such phone as an iPhone 4gS)
    What you describe here is in my eyes the beginning signs of accidental damge, such as water damge of some sort.
    This is a great oppurtunity to see if the same issues you are having when connecting to your computer, replicate when conencted to another computer.
    You need to find out if there is a way to test with a new USB cord if possible to rule that out.
    Trying to isolate this to, or away from the iphone.

  • HT5172 My new Macbook Pro doesn't recognize my card reader (with a CF card inserted).

    My new Macbook Pro doesn't recognize my USB card reader with a CF card inserted.  It works fine on my old Macbook Pro.
    Do I need a new card reader?  USB 3 perhaps?
    I would appreciate any input that you may have.  Thank you.

    Hi, closereaching. Instead of spending 12 hours reinstalling your operating system and getting everything back up to date again, which probably won't accomplish anything, why not buy a $10 USB card reader for your Casio's SD card? Or (more expensive, but a much more elegant solution), an ExpressCard SD card reader that can stay in your computer all the time?

  • Macbook Pro doesn't recognize DVD

    My MacBook Pro doesn't read some DVD's! I'm trying to install my camera's software, but the drive doesn't read the DVD! It just make some odd noises and then ejects the disc. However, it can still read discs I burned on my other Mac and it recognizes blank CD's and DVD's! Is anyone going through the same issue?

    It's the DVD for Mac. And I'm having the same problem with other DVDs. The drive just recognize blank discs and discs burned on other macs.

  • MacBook Pro doesn't recognize iPhone when USB connected

    I have a MacBook Pro, an iPod, and an iPhone.  Using the same usb port and cable I have the following situation.  The MacBook Pro recognizes both other devises in iTunes through the internet.  The MacBook Pro does not recognize the iPhone 5 when connected by cable but does recognize the iPod.  Because of this I can't transfer photos from the iPhone to the MacBook Pro.  When connected the iPod shows it is charging but the iPhone 5 does not.  Using the same cable connected to the wall charger both devices show they are charging.  Does anyone have a suggestion?  Thank you.

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try           
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • New MacBook Pro doesn't recognize camera

    I just upgraded from my old G4 PowerBook (with iLife 08) to a new MacBook Pro (with iLife 09). I have two cameras, a Nikon D60 and a Casio Exilim Z850. The new MacBook Pro and iPhoto 09 have no problem recognizing the D60... however, the Casio isn't recognized by the new computer/software; all I get is the infinite spinning beachball. My old G4 PowerBook / iPhoto 08 still recognizes the Casio just fine... however, I'm not planning on keeping the G4 PowerBook for much longer; the MacBook Pro was intended to be a replacement. Now I'm just trying to figure out if there's any way to get the new computer to communicate with the Casio. Granted, the D60 is a much nicer camera... but sometimes all you need is a good point-and-shoot that fits easily in your pocket, so I'd like to be able to keep the Z850 if I can find a way to get the new computer to recognize it. Any thoughts?

    Hi, closereaching. Instead of spending 12 hours reinstalling your operating system and getting everything back up to date again, which probably won't accomplish anything, why not buy a $10 USB card reader for your Casio's SD card? Or (more expensive, but a much more elegant solution), an ExpressCard SD card reader that can stay in your computer all the time?

  • Macbook Pro doesn't recognize my fast track pro c400

    Hello I am using Fast track pro c400 from M-audio.
    When I use the fast track pro c400 it works.
    However, when I disconnect it from my Macbook Pro and reconnects it,
    MIDI setting recognizes it again but this time with out any available input and output.
    So when I use mainstage or garageband, it recognizes that there is 1 midi input but
    when I go to setting it doesn't uses fast track pro's input, output instead, it uses built in I/O.
    So i tried to reinstall my driver and when I did it, it worked again for few time and
    same problem occured.

    okay, I had connected my MBP to the base station and managed to restore the base station to factory settings. So, my MBP recognized the base station, although there's something weird about it.. you know how when you open the airport utility, on the left hand column, usually there should be a picture of your airport extreme with the name below it, right? Mine doesn't show any picture except the orange dot and my base station name.
    In addition, my MBP airport is able to pick up my recently-made network, but unable to join the network. Again, when I opened the AirPort utility, it can't detect my airport extreme wirelessly.
    I have tried every method that I can think of, but my MBP won't recognize the airport extreme anymore, wirelessly.
    Please tell me what should I do?

  • MacBook Pro doesn't recognize JVC camcorder GR-X5E

    Hello
    Does somebody know any kind of "adapter" for MacBook Pro with OS X 10.5.8 that makes the signals of my JVC camcorder GR-X5E readable?
    jvc.ch doesn't has a solution
    Thank's in advance!

    I only used the USB cable to connect camera and MacBook, opened iMovie and waited until the icon would appear. It didn't. Also on the desktop nothing happend.
    Therefore I asked jvc.ch and they said, that there was no possibility...

  • Macbook Pro doesn't recognize TV

    I have recent;y purchased my Macbook Pro and and trying to ensure it can do what my Windows laptop could do. In trying to connect to a TV, I purchased a mini display port to HDMI Adapter (Rocketfish.) I successfully connected my Macbook with LCD TVS within my home but when I try to connect to my Mitsubishi WD-65833 65" Diamond Series 1080p rear-projection DLP HDTV nothing happnes. I have tested all three HDMI inputs which work with other items but the Macbook doesn't ween to recognize I am connected to this TV like it does with my other TVs.
    Any ideas?
    I really want to confirm this laptop will replace my windows laptop

    have you set up home sharing on your devices ?
    iOS: Setting up Home Sharing on your device

  • New Macbook pro doesn't recognize Iphone

    Hello,
    Just installed my new MacBookPro. I synchronized it with my old MacBook. Everything is in my new MacBook. However. When I connect my Iphone 4s to my new computer, Itunes doesn't recognize it. There is no 'resource'. Can anybody help me?
    Marchall

    You'll need to ask for help in the iTunes forum. They can provide the specific Apple document that walks you through what to do if the phone is not recognized by the computer.

Maybe you are looking for

  • Something graphical is glitching up, but I don't know what it is

    I was doing what I was usually doing, so I found out that systemd-analyze would analyze my systemd boot times. I did systemd-analyze, except it crashed Xorg or something, I don't know. It looked like the screen had glitched up, as in, there was stati

  • ORACLE 8i INSTALLER WITH P4 ISSUES AND TNS ERROR WITH 9i

    I want to thank those that have been of help on this subject matter. Finally after 2 agonised weeks, I was able to get around the Oracle 8i installer not able to run on my Pentium 4 laptop. Also having problem logging in to 9i SQL*PLUS. I just want t

  • Error in opening PDF.

    Hello Experts, I have created one smartforms which containt some terms and condition which i want to send as a pdf to set of people. Now i am able to send the smartform as PDF . But when i am trying to open the PDF its shows me some error like 'PDF f

  • Replace Self-Signed FAST Search Certificate with Third Party Certificate

    We are trying to replace the Self-Signed FAST Search Certificate with Third Party Certificate in our SP 2010 environment. And are facing issues while enabling the SSL communication between the FAST servers and the corporate servers. Our FAST search s

  • BEFW11S4 v2: Javascript Error in Gozila.js

    Hello, I have a BEFW11S4 v2 (yes, old) and have the most current firmware (1.45.10).  However, under Firefox 3 I keep getting the following JS error: Warning: Expected ',' or '{' but found ';'.  Ruleset ignored due to bad selector. Source File: http: