My MacBook Pro don't boot - Help me please ! :/

Hi everyone.
I've a very ungry bug on my macbook pro early 2008 (not unibody).
When i want to boot, screen works, but boot stop process when apple display, and circular advancement was blocked..
- I try to change ram => not works
- Try to reset PRAM (with ctrl+cmd+p+r) x5 => don't works
- Try to change hard drive to another, with fresh install of SL => don't works
- Try to boot with Firewire, on another macbook pro => don't works
I've not idea yet...
Someone can help me ?
Thnaks in advance !

Sounds like a hardware problem of some sort, we can't help you with this.

Similar Messages

  • My macbook pro is not booting, please help me :(

    hello,
    my macbook pro is not booting in OS X, it displays the apple logo and the spinning wheel, but a circle with a cross appears and the spinning wheel continues, please guys, help me
    P.S: my MBP is boot camped

    Well, sometimes you can gain access to the drive from another Mac connected to your computer via Firewire cable. It's called Target Disk Mode - Transferring files between two computers using FireWire. Or you already have backups. If you don't then you should consider a backup strategy to avoid this the next time it happens.
    There are too many reasons for a drive to become corrupted within the normal course of use. A most common cause is abnormal shutdowns from power outages or not using the normal shutdown procedure because of a system lockup. Software glitches happen or you may be using software that is poorly written, and on and on.
    If don't have backups:
    Basic Backup
    Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
    Cool Drives
    OWC
    WiebeTech
    Firewire Direct
    California Drives
    NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • Hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher"

    hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"

    you can't add or mofidy partition numbers. especially not if and once you have windows installed.
    boot from Windows 7 DVD afterwards
    but first you have to tell us and Christopher what and how you partitioned your system.
    Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
    https://discussions.apple.com/thread/3293948
    So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
    Thread with suggestions on Windows backup methods:
    https://discussions.apple.com/thread/3798090
    Paragon CampTune
    Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
    Securing Dual-System Configuration
    Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
    Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
    GParted Live
    GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
    iPartition
    Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
    Paragon Partition Manager
    From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
    Winclone/Disk Utility
    Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
    NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
    Winclone updated to support Lion Winclone updates and download
    Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
    The full process would be:
    Backup Windows partition with Winclone.
    (if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
    Delete old Windows partition
    Resize current Mac Partition
    Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
    (If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
    Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
    Restore Winclone partition over new Windows partition
    An alternate Winclone based process is described in the External Guides section
    Native OS utilities
    MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
    Resizing under VMWare Fusion
    If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
    From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
    Thread with suggestions on Windows backup methods:
    https://discussions.apple.com/thread/3798090

  • GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .

    GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
    any
    my problem looks like this
    http://www.youtube.com/watch?v=PGzgS57THMo
    gta 4 steam !

    If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
    This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
    Just follow the steps:
    Step 1: Create a text file named ‘commandline.txt’ (without the " ")
    Step 2: Put the following statement inside it:
    i5 users: -availablevidmem 18.0 (with the -)
    i7 users: -availablevidmem 22.0 (with the -)
    Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
    Step 4: locate the file "GTAIV.exe" (in GTA main folder)
    Right click the file and select Properties
    Under the shortcut tab, you will see an area that says Target
    Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
    (remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
    It should look something like this:
    Make sure to add space between " and -"
    I hope This helps, although late cx

  • My macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

    my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

    Mac OS X: Gray screen appears during startup - Apple Support

  • My isight camera was not working. so i tried to smc reset it as said in apples support community but now wat happened is my macbook pro don't charge, it don't show any light for checking charge, nor it starts up. please help. Thanks

    my isight camera was not working. so i tried to smc reset it as said in apples support community but now wat happened is my macbook pro don't charge, it don't show any light for checking charge, nor it starts up. please help. Thanks

    Try zapping the PRAM.  See KB Article http://support.apple.com/kb/PH11243 OS X Mountain Lion: Reset your computer’s PRAM
    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.

  • MacBook Pro won't boot up. HELP!!! Need this computer for work tomorrow!!

    My MacBook Pro will not boot. I was using it fine one minute, closed the lid to walk downstairs. Opened the lid and there was nothing. Tried to reboot it ... no chime with a black screen... nothing. Battery is working and fully charged. Tried using the power plug as well.

    There are many comments about the NVIDIA GPU issue and Apple not replacing the GPU.  I will say I had good success in getting Apple to replace mine in my Macbook Pro. When my computer suddenly would not fully turn on, I researched the issue to find out the possible reasons and then somewhat dawdled in taking it in. It was 2 weeks past the 4-year GPU warranty window. But I had had problems for some time preceding when it wouldn't fully turn on, such as geo designs appearing on the screen and the screen going dark, and those issues did occur at least a month or more before my warranty ended. I had no idea what those issues meant and simply ignored them until the computer wouldn't fully turn on.
    The good folks at The Apple store in Austin initially said no luck; yes it's the GPU but it's two weeks past the warranty. But then they kindly relented because clearly the symptoms I described to them that occurred during the warranty were caused by the faulty GPU. How would I know this was the issue?  They replaced the logic board at no cost. I've seen comments here that a Genius said the problem was the logic board, not the GPU, and therefore Apple would not make the repair. I was told by my Genius that the GPU is part of the logic board, and therefore the logic board needed replacing. This was a $526 repair that I was grateful Apple took care of. I would not have made the repair and would have gone out and bought a new non-Apple computer with a warranty.
    When I got my computer back, I checked it before I left the Apple store and it was running slow. I ended up paying Apple to replace the hard drive, so ultimately I did pay for an Apple repair. But I'm a happy rather than disappointed Apple customer because of the free GPU repair. Happy, devoted customers has made Apple a great company, and it should be worth it to the company to fix the faulty GPUs that are close to warranty to keep customers and keep them happy. 

  • Macbook pro won't boot - how do I retrieve emails?

    Hey guys
    I've got a common problem that my Macbook pro won't boot. Sometimes I get stuck on the grey screen with spinning wheel, sometimes on the blue screen with spinning wheel
    I've scoured the internet on another machine and tried every trick I can find with the MacBook Pro including
    Disk / Permissions repair from install disk (says the HD is fine)
    PRAM
    Single User
    Soft
    It seems like my only option at the moment is an Install and Archive. I can mount the MacBook Pro on another machine with a firewire and remove files and backed up a lot on a hard drive before it died
    What I am worried about is how to retrieve some emails from the machine that only exist locally because I have deleted them from the server
    Is there a way of doing that?
    Would Migration Assistant work?
    If anyone could help me with this or suggest any other methods for bring my machine out of a coma I'd really appreciate it
    d

    Try a different adapter. If you don't have access to a known-good adapter any other way, make a Genius Bar appointment at an Apple Store.

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • Macbook pro will not boot into Mac OSX

    When i got my MacBook Pro it would boot into Mac OSX fine. Now it wont even give me the option and will only let me boot into Windows which i have running through bootcamp. I have tried reinstalling MacOSX but my OSX installion DVD will not get recognised and i cannot boot off it either. I have tried using 2 other discs still with the same issue. The confusing thing is that the CD/DVD drive works fine and the MacOSx discs work fine in other macs as i have tried it in my brothers machine.
    Any help appreciated.
    Thanks

    I don't think that the laptop even has Mac installed anymore becuase in an attempt to reinstall Mac the partition was formatted. And I can't boot of the disc becuase it just ejects by itself after a few seconds in the drive.

  • MacBook Pro will not boot up

    Hello,
    My three-month-old MacBook Pro refuses to boot up. The problem began about two days ago, and since then, the situation hasn't changed. When I press the power button, the Apple logo on the boot screen appears, but it quickly flashes on and off, with a "no symbol" and a symbol consisting of a folder with a question mark on it flashing at random concurrently. I really need my MacBook Pro to boot up, because I require  it for homework that is due tomorrow. I have never dropped or even scratched this computer, and I always use it in a cool and dry environment, so I don't think it could have been anything to do with overheating. But I'm no expert. Does anyone know what I can do? Thank you so much, in advance!

    Usually the flashing question mark means that the computer can't find a bootable device. Your hard drive may be damaged.
    Try booting into your Recovery partition, holding down the command and R keys whilst booting. Use Disk Utiity to both verify ad repair your hard drive. If the drive cannot be repaired, called back (you can access Safari from the Recovery partition).
    Clinton

  • Mid 2006 Macbook Pro won't boot (from HD or optical)

    My mid 2006 Macbook Pro will not boot from the hard disk, or from the internal DVD. I am currently running the latest version of Lion (10.7).
    I tried searching the forums and found a similar issue here:
    https://discussions.apple.com/thread/1687899?start=0&tstart=0
    But that was with a Mac Mini. And it doesn't look like the OP issue was ever resolved. I am having the exact same problem.
    When attempting a normal boot from the internal HD of the Macbook Pro. It will make the happy chime of a successful POST. It will display the Apple logo. And that's as far as she gets.
    No spinning wheel, no error image, no nothing. Eventually the system will start spinning up the fans as if it were under load (this was after about a half hour of just letting it sit there).
    Doing a verbose boot, it never went past this:
    com.apple.driver.Apple.IntelCPUPowerManagement
    Photo of verbose boot:
    Here's what I've tried.
    1. Bought a brand new battery (as the current one was at death's door)
    2. Zapped PRAM (Apple + Option + P + R)
    3. Reset SMC according to these directions: http://support.apple.com/kb/HT3964?viewlocale=en_US
    4. Attempted to boot to my original Tiger (10.4) install DVD, only to stop at this point during a verbose boot (Apple V):
    Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style
    Photos:
    5. I am able to put her in Target Disk Mode (hold T at boot). Then with a firewire cable I can connect it to my wife's Macbook 13" and I am able to run disk utility on it! Disk Utility did find and repair errors, however, it still refuses to boot.
    6. I attempted to boot from my wife's Macbook 13" in Target Disk Mode. I put her machine in Target disk mode. Connected the firewire cable. Powered on my 15" MBP while holding the option key. Then I selected her drive as the boot disk... however it still refuses to boot even from a known working HD.
    7. Finally, I swapped around RAM DIMMs with no change in behavior.
    Help! I know she's an older gal (Laptop is 6 years old now) but I'm not exactly flush with cash and would rather not give up on her just yet.

    My Mac started freezing (colored pinwheel) every time I tried using any application (i.e. Safari, iPhoto). After restarting for the 2nd time, it would no longer boot - makes start up sound but gets stuck on gray screen w/ apple icon.  I tried resetting PRAM also - did nothing. I decided to reinstall OS; problem now is my HD is nowhere to be found! I am a tech dummy so this is way beyond my comprehension...I'm not seeing my HD from the Disk Utility either??? 
    Side question...I backed up my files (mostly pics JPEG and videos) on DVD (had to compress to save). Why can't I open files on PC?

  • Macbook Pro will not boot beyond grey screen.  System freezes.

    My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.)  I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists.  When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet:   0    0    setFixedSpeed - logic error, speed any?"
    Any ideas how to fix this without doing an Archive & Install?
    I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.)  Will this actually be the case?  Will I lose them.
    Any help gratefully received.  Many thanks.

    jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.)  Will this actually be the case?  Will I lose them...
    Archive and Install just affects the System files, so any apps you have  should still be available afterwards.  The Installer on the disk that  came  with your Mac, when you bought it, will tell you this before you  proceed.  Of course, you can always back out of the Installer if you feel chicken.
    Notwithstanding it is still necessary to backup everything.  You need to check that Time Machine is set to also backup your Applications folder.  It might be set not to do this. 
    It may not be necessary to worry about this if you have the original installer disc(s).  I think any stuff downloaded from iTunes etc can be re-downloaded.  However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space.  It's bound to be quicker than re-downloading the stuff plus any updates.  And of course there's those Apps that you have but forgotten about.  What about them?

  • MacBook Pro will not boot after software update

    MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you).  MONEY, MONEY, MONEY is the name of the game.  They can cause your computer to crash and still charge you! 
    Does anyone have an answer to why my computer is showing a little gear spinning for hours?  I have tried several things with NO luck.
    Thanks-

    Run through the list of fixes here
    Step by Step to fix your Mac

  • MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

    MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

    Hi s.cheslik,
    It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

Maybe you are looking for