My Macbook Pro (early 2011) has 4 gig of memory and is using all of it and running slow.
My (early 2011) MacBook Pro has 4 gig of memory and is using all of it and running slow. I am planning to double memory, but any ideas about why it's using all that memory? (Yosemite 10.10.2).
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Similar Messages
-
Macbook pro (early 2011 MacBookPro8,1) maximum memory
I have 13" macbook pro (early 2011 MacBookPro8,1) and I saw that the max memory is 8GB.
However, I saw some site selling upgrade to 16GB to my model.
My question - is it possible to perform upgrade to 16GB like those site suggested, or only 8GB ?You can run 16GB's of RAM in your computer, no problems.
1333MHz DDR3 SO-DIMM PC10600 204 Pin -
Macbook Pro Early 2011 having issues
Hi all
I hope this message finds you all well.
Sorry that my first post is one begging for help but with a gig 3 weeks away i am bricking it due to the fact that my macbook pro, early 2011 has been playing up of late. It first started having problems when the L shift key became stuck, not physically but after some investigation on here I used Karabiner software to ascertain the issue and disable the key. However since then the computer hasnt run properly at all.
I have tried disk repair and so forth, also run Avast virus check but the issues still persist.
I run Traktor DJ software and for no reason the macbook has started glitching, spinning wheel of doom comes and everything slows down. I can't run simultaneous programmes and certainly can't run my Arkaos Grand VJ software at all which isn't good when we have a big gig in 3 weeks time.
I have run the Etrecheck as shown below but I dont know what to make of it?!
Can someone please give me some advice as I am stuck and cant rely on the laptop for the gig which will throw a real spanner in the works.
Problem description:
Runs slow, spinning wheel frequently, cannot run arkaos software, tractor software glitches regularly, L shift is stuck on (presently disabled using Karabiner software
EtreCheck version: 2.0.4 (89)
Report generated 16 October 2014 14:01:30 BST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
AMD Radeon HD 6490M - VRAM: 256 MB
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 9 days 1:39:24
Disk Information: ℹ️
ST500LM012 HN-M500MBB disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (104.69 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
JMicron Samsung S2 Portable 1 TB
S.M.A.R.T. Status: Verified
J-Unit (disk2s1) /Volumes/J-Unit : 1 TB (162.07 GB free)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Karabiner.app
[loaded] org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
/Library/Parallels/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_hypervisor (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_netbridge (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_vnic (7.0 15095.768120) Support
/System/Library/Extensions
[not loaded] com.caiaq.driver.NIUSBAudio2DJDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBAudio4DJDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBTraktorAudio2Driver (2.4.23) Support
[loaded] com.caiaq.driver.NIUSBTraktorKontrolS4Driver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBTraktorKontrolX1Driver (2.4.21) Support
[not loaded] com.native-instruments.driver.NIUSBDeviceHelper (1.0.8) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.avast.userinit.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[invalid?] com.parallels.desktop.launch.plist Support
[loaded] com.parallels.DesktopControlAgent.plist Support
[running] com.parallels.vm.prl_pcproxy.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[loaded] org.gpgtools.gpgmail.enable-bundles.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist Support
[running] org.gpgtools.Libmacgpg.xpc.plist Support
[loaded] org.gpgtools.macgpg2.fix.plist Support
[running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist Support
[loaded] org.gpgtools.macgpg2.updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.parallels.desktop.launchdaemon.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.avast.home.userinit.plist Support
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
smcFanControl Application (/Applications/smcFanControl.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify UNKNOWN (missing value)
TorBrowser UNKNOWN (missing value)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Wondershare Helper Compact Application (/Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app)
SE Media Sync Helper ApplicationHidden (/Applications/Sony Ericsson Media Sync.app/Contents/Resources/SE Media Sync Helper.app)
Karabiner Application (/Applications/Karabiner.app)
NIHardwareAgent ApplicationHidden (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
OVSHelper: Version: 1.1 Support
DivXBrowserPlugin: Version: 2.2 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.5 - SDK 10.6 Support
Scorch: Version: 6.2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User Internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.6 Support
Safari Extensions: ℹ️
AdBlock
wrc
3rd Party Preference Panes: ℹ️
DivX Support
Flash Player Support
GPGPreferences Support
Native Instruments USB Audio Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 394.56 GB
Destinations:
Stampatron II [Local]
Total size: 499.76 GB
Total number of backups: 8
Oldest backup: 2014-10-08 21:14:51 +0000
Last backup: 2014-10-09 04:18:39 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 394.56 GB X 3)
Backup [Local]
Total size: 499.94 GB
Total number of backups: 1
Oldest backup: 2014-09-20 07:40:57 +0000
Last backup: 2014-09-20 07:40:57 +0000
Size of backup disk: Too small
Backup size 499.94 GB < (Disk used 394.56 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
3% bluetoothaudiod
2% com.avast.daemon
1% iTunes
1% Safari
Top Processes by Memory: ℹ️
205 MB Safari
106 MB com.apple.WebKit.WebContent
90 MB com.avast.daemon
69 MB Finder
43 MB iTunes
Virtual Memory Information: ℹ️
34 MB Free RAM
1.03 GB Active RAM
1.01 GB Inactive RAM
1.27 GB Wired RAM
20.97 GB Page-ins
2.19 GB Page-outsYou have Avast installed which could be causing some problems for your Mac's operation. Use the Avast uninstaller and get rid of it.
Boot into Recovery mode by holding down the Command and R keys together and use Disk Utility there to Repair your hard drive and repair disk permissions.
Hope that helps.
As for the shift key, you should take the computer to the Apple Genius Bar and have them look at it. -
My Macbook pro (early 2011)become very slow after maverick install
Hi,
My Macbook Pro (early 2011) has become very slow after installing Maverick.
System is struggling to open any web pages, apps etc.. Even booting time is more than 5 mins. My macbook has 8 GB Ram and 750GM memory and also got 200GB of free space memory..
Could you please advice me on this. Thanksetresoft a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
http://www.etresoft.com/etrecheck
Download, run and post the results back here.
Pete -
Macbook pro early 2011 freezes, slow, weird fan noise + trackpad jumping around
Hi guys, see the Etrecheck report below. My 13' Macbook pro (early 2011) has been very slow for the last few months, the fan makes a weird blowing noise (several fellow students have looked around what the **** that noise was when it started doing it), and recently started freezing when opening iTunes, OpenOffice and even Firefox.
OH AND my trackpad has jumping around without me even touching it.
What do you guys think? What's the problem, what can I do? IF I take it in how much do you think it might cost?
Problem description:
Macbook is slow, freezes for few seconds regularly, and fan makes weird noise
EtreCheck version: 2.0.11 (98)
Report generated 7 Nov 2014 15:16:23 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 6:13:14
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (378.53 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.48 - SDK 10.6) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.48 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.2.48 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.2.48 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.2.48 - SDK 10.6) Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[invalid?] com.maintain.CocktailPurgeInactiveMemory.plist Support
[invalid?] com.maintain.CocktailSystemEvents.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.sophos.uiserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.maintain.CocktailScheduler.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.rim.BBDaemon.plist Support
[running] com.sophos.common.servicemanager.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
TuneupMyMac Application (/Applications/TuneupMyMac.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 12.1.0r150 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
AdobePDFViewer: Version: 10.1.12 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
User Internet Plug-ins: ℹ️
RealPlayer Plugin: Version: (null) Support
Safari Extensions: ℹ️
Slick Savings
Ebay Shopping Assistant
Searchme
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
6% WindowServer
1% plugin-container
1% BBLaunchAgent
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
464 MB firefox
90 MB Finder
82 MB System Information
82 MB TuneupMyMac
69 MB InterCheck
Virtual Memory Information: ℹ️
565 MB Free RAM
1.37 GB Active RAM
746 MB Inactive RAM
1.14 GB Wired RAM
2.21 GB Page-ins
46 MB Page-outsI did as you suggested and it it's definitely not freezing as much, though a little bit still. Thanks though!
Trackpad is also still jumping around, but I figured that might have to be replaced anyways.
Anything else you recommend that I could / should do? -
Yosemite macbook pro early 2011 camera light blinks
I tried to find a similar question that I saw with a Google Search but couldn't find here... But I REALLY like the Yosemite upgrade... I have problems with FaceTime - sometimes I hang up and it continues to ring, and can not connect as reliably as I could in the past with Mavericks... Also, I have noticed that the light near my camera blinks from time to time... On another post, the guy/gal listed when he noticed it blinking... A bit scary as I wonder if when it is blinking it is secretly taking m picture and sending it to some remote location... I use Little Snitch so doubt that pictures are being exfiltrated without my knowledge, but you never know... But bottom line is that I LOVE the Yosemite upgrade! Upgraded relatively smoothly on my MacBook Pro early 2011... upgraded a few of the apps (free upgrades) and after that, and a couple reboots to make sure the upgrades were in place - all is REAL GOOD... GOOD JOB Apple OS/X developers on Yosemite!!!
Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback -
Reformatting MacBook Pro (early 2011)
Hi guys, I need help by reformatting my MacBook Pro (early 2011)
I want to reformat it, because the last months it became really slow. I've installed and maybe not correctly uninstalled lots of applications and stuff like this... I just wannt to clean it out, delete all whats on it.
When i bought my MBP it came with OS X Snow Leopard and iLife 11... but NO discs. Afterwards i purchased OS X Lion in the App Store (NO disc). I've checked now on my App Store, and under purchased Apps nothing appears.
After refomratting it, if i am not wrong, OS X SL will be installed, and iLife will be deleted.
But I want the clean MBP with my OS X Lion and my iLife 11 on it. How do i do this? None of them are shown in my App Store under "purchased".
Thanks in advance!
ChristianThat is Completely incorrect. Every Mac computer that came with Snow Leopard or any other earlier version of OS X came with 2 system discs. One is the OS and the other is the iLife Appications disc. If you bought your Mac New then They Were In The Box the computer came in.
If you don't have them, like you didn't know they were in the box and you threw that box out, you can order a replacement set from Apple.
But if you had Lion installed then on the internal drive is the Recovery HD partition. At starup hold down the Command+r keys and that will boot you to the Recovery HD partition and from there you can Erase the Macintosh HD partition and Re-Install Lion. you will need the Apple ID and password that was used to buy Lion originally. It will ask for both of those to start the download of Lion.
1_orange wrote:
Thanks for the fast reply.
Since the 2011 Apple doesn't send any dsiks by purchasing a MBP, so I don't have any iLife disk. So theres no other way to stay with my old iLife apps?
The thing with lion, you say, I can see in Recovery HD if it would reinstall 10.7 before starting or earasing anything? -
Hi to all.
I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.
If anyone has solved such ploblem, please let me know.In reply to my own post have to say appologies to Apple whose Thunderbold port I used to blame.
Shame on me)
So, what was my problem?
Guess what?
Manhattan DisplayPort to HDMI Adapter !
The point is it's actually do only what it said to do, converts DP to HDMI.
But I for some reason thought it can be used vice versa, to be HDMI to DP converter))
I was wrong.
I bought new one HDMI to DVI adapter and now I HAVE external display!
Thunderbolt works like a charm.
So I'm very satisfied now. -
MacBook Pro Early 2011 - Airplay Mirroring only sends audio to Apple TV 2nd Gen
Ok, I'm stumped by this one. I have a 15" MBP Early 2011 edition and an Apple TV 2nd Gen. Airplay Mirroring from my MBP to Apple TV only transmits the audio -- the MBP will resize the screen like it's connected to a 16:9 device, and Apple TV will show a black screen like it's about to pick up the video signal, but no video transmits. A couple of times, video started transmitting, but it was about 30 seconds delayed (?!) and extremely choppy. Both devices are connected wirelessly to a Linksys router with 5 GHz (wireless N) capabilities. The router has been configured to Apple's recommendations for Airplay Mirroring.
A little more about my MacBook Pro:
Early 2011 Model ID: MacBookPro8,2
OS: 10.8.2 Mountain Lion
CPU: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
GPU: AMD Radeon HD 6490M, VRAM 256 MB Total
This problem is driving me crazy! Airplay works flawlessly between my iPhone 5 and Apple TV, but not with a much more powerful laptop. Also, I tried Mirroring from a friend's 13" MacBook Pro, and it did the same thing.
Any suggestions, tips, ideas, etc. to get this working is appreciated!Rudegar wrote:
your macbook dont support airplay mirror
He has an Early-2011 MacBook Pro, which does meet the requirements. The issue is that it is running OS X 10.7.5 and needs to be upgraded to Mountain Lion to use mirroring. -
Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
GreggYou should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro -
Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
GreggI have tested it with the Moshi (http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support) and Belkin (http://store.apple.com/us/product/HA342ZM/A/belkin-mini-displayport-to-hdmi-adap ter) adapters, both purchased from the Apple Store with no such luck. Have you or anyone else had success with any other third-party adapters?
-
Windows 8 on Macbook Pro (early 2011)
Hi,
I want to install Windows 8 on my macbook pro (early 2011) running the new Mavericks 10.9, but im stucked at the formating process when installing windows 8.
So first I go into boot camp and partition my disk as it guides me to. When It has finished and rebooted I'll hold the alt-option to select the windows disc (efi-boot). When I choose the language, typed the activationcode and all that, it wants me to format the partition i made, and thats when I got stucked. When i try to format it, it says:
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GTP disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I downloaded my windows from dreamsparks microsoft, and im pretty sure it is the full version (not the upgrade). The file size is 3.6GB. I don't know if that can tell which version of windows it is.
I don't know what to do about this problem, I need help please!
Thanksbootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine -
Macbook Pro early-2011 crashing/locking-up
Hello,
My MacBook Pro (early-2011 model 15") has been locking up and crashing lately. It was recently upgraded to Mavericks OSX.This has happened only a handful of randomn times over the past two months. I don't think it has to do with the OS version because it did this a couple months ago as stated when I had Lion, and also ML. However, in the past 24 hours i have locked up around 5 times and crashed at 3 times. I've attached the crash report below from the latest crash this morning. I use one usb port to connect to a Dell monitor using DisplayLink adapter, and the other usb port goes to a 4-port usb hub that has my wired keyboard, mouse, and phones that I test with plugged into. The mini displayport goes to another Dell monitor. Can anyone help me determine the issue? Does it look to you like the RAM has been corrupted and needs replacing perhaps? Or maybe it is this usb hub causing memory crashes from having so much stuff plugged into it? Log below:
Anonymous UUID: A06D9E0B-752F-521A-C64F-89E5D1C93276
Fri Nov 1 09:51:46 2013
Machine-check capabilities 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 40
Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Processor 0: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 1: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 2: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 3: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 4: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 5: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 6: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 7: machine-check status 0x000
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: KINGSTON SV300S37A240G, 240.06 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: Hub
USB Device: Plugable UGA-2K-A
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: USB2.0 Hub
USB Device: Hub
USB Device: G500
USB Device: Multimedia keyboard
USB Device: Hub
USB Device: XT912
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1Hi Will-H,
Thanks for using Apple Support Communities. It sounds like more isolation might be needed to rule some things out. I would recommend this article:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Disconnect any peripheral devices you just connected (for example, a printer). They may not be compatible with your version of OS X.
Uninstall any app plug-ins or enhancements from other manufacturers.If you recently updated the app or OS X, a plug-in or enhancement you installed may no longer be compatible.
Use Apple Diagnostics or Apple Hardware Test. These tools can tell you if hardware you installed, such as additional memory, is incompatible, improperly installed, or defective.Use Apple Diagnostics or Apple Hardware Test
Restart your Mac in safe mode.Start up in safe mode
Use Disk Utility to repair your computer’s internal disk.
Cheers,
- Ari -
Macbook pro (early-2011) os x 10.7.5 unexpected shutdown
Hello ,
my macbook pro (early-2011) running os x 10.7.5 has all of a sudden been unexpectedly shutting down . seems totally random . not many programs running , no processor heavy stuff . just fine , then ... blackness, off . starts back up just fine , no trace of anything weird (no crash report stuff , etc.) . then it happens again . and again . scary . help ?Intel-based Macs: Resetting the System Management Controller (SMC)
-
MacBook Pro (Early 2011) No Wifi Hardware Installed
Please help me! I'm confused.
My 13" MacBook Pro (Early 2011) Keeps saying that No WIFI Hardware is installed.
My Mac has been running great until earlier this week. I turned it off one night before bed and then the next morning as I switched it on, it said there was no WIFI hardware installed. I launched recover mode which is when I figured my WIFI works in recovery mode just not in the Mac itself. I reinstalled a fresh copy of OS X Yosemite which worked for a day, but sure thing the next day I loaded the Mac and then there was the same issue. So I reinstalled OS X Yosemite... AGAIN!! this time I hit an error, Yosemite had deleting my recovery drive and unmounted my Macintosh HD but thats anther story to fix another time. Once I finally repaired my disk to install Yosemite my WIFI was working again... until I restarted my Mac and it went off and the error reappeared. Luckily Apple released OS X 10.10.2 so I plugged in the ethernet and installed it which has fixed my WIFI... for now, I'm to scared to restart my Mac. Does Anyone know what is going on? Thank you
Like I said when it gives the error (No WIFI Hardware installed) the wifi connects in recovery just not on my Mac OS. I'm currently using my Mac to submit this question and all seems fine so far.
Thanks again.Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Maybe you are looking for
-
3D surface plot export _ missing scale on the projection​s
Hi all, I am using 3D surface plot subvi in LabView 2010 SP1. After plotting the data, I can export the images (.bmp, mata file etc.). While exporting the projections of the images, I am not able to get the axis scales on them, though when I export
-
APT MGMotor ( Where can I find it?)
Hi everyone, I am trying to create an ActiveX control, but I can't find MGMotor from the list of creatable objects. Do I need to download a driver from the web? which web should I go for? Cheers
-
I keep getting lost in this,,,
i am not in a great situation right now... despite the fact that i had believed that my home was stable, apparently my room-mate had different ideas, and has really (don't want to be rude, so i'll just say censored) me - but i've managed to pull the
-
Reader 9.4 internal error
Running Windows 7 Previously installed Reader 9.4 and it worked for a few days. Stopped working, uninstalled and reinstalled (twice). I try to open a file using Adobe Reader and the only message I get is "Internal Error" and the program has to clos
-
Never ending loop is driving me loopy!
If I spend anymore time on this I'll end up in a straight jacket(and then I might be able to get a job with Sun !) O.K. - here's the plan - the first loop should execute, evaluate if the value 'max' mod each value in the array is equal to 0. If none