My MacBook Pro email is Version 7.3 (1878.2).
Sporatically my mail will reload old mail. I have recently added a iphone 4s.
Why?
How can I fix this?
Also, my Junk folder will not show any junk, but then when I go to my hotmail account thru Safari, junk messages will appear. I have lost immportant emails because the junk folder triggered it wrong. Now everyday I have to go into my hotmail account to check via safari.
did u check the model of printer wether its compatible with 10.7
http://support.apple.com/kb/HT3669
Similar Messages
-
I have a macbook pro 15" 2007 version 10.6.8 and try to up date to mavericks and it's not allowing too. what should i do?
What does it tell you. If it says it isn't compatible, then you don't have a mid/late 2007 MBP. You might have an early 2007 MBP, which cannot run Mountain Lion or Mavericks.
You can check here to see exactly which MBP you have: http://support.apple.com/kb/ht4132
If you hold down the Option key and select System Profiler from the Apple Menu, it will display the model identifier under the Hardware Section.
It must be a macbookpro3,1 or later. -
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
My macbook pro i7 (2011 version) has a loud fan and a high cpu % when I have Skype on or when I am on Safari. My laptop would sometimes freeze for a while and it is usually hot. Has anyone else encounter this problem and know how to fix it? Thanks!
Skype is a very resource intensive activity...it has been reported on here users are seeing cpu temperatures on the order of 80-85 °C, within the limits of the cpu, but still hot to the touch.
Make sure nothing else is running so you keep the thermal load down. -
bought referbished macbook pro oct 2011 version, just set it up using time machine and quicklime pro has disappeared. I have quicktime but not quicktime pro. Any ideas? thanks!
Try, in preferences, resetting 64 bit to 32 bits. Should work fine. the older vidoes, etc will not work with 64 bit. Had the same problem/scare. Let us know if this helps and works!
-
I forgot my admin password for my Macbook Pro OS X version 10.9, how can i recover it and reset my password? Thank you!
OS X Lion>: How to Easily Reset the Administrator Password
-
just bought an iPad 2 and i have a Macbook Pro OS X version 10.4.11. can i not set up my iPad 2 because of this and i have to get the 10.5 version???
You need to purchase and install 10.5 or 10.6.
(58630) -
Unable to locate (Microsoft-Lync.log) files on MACBook Pro (OS X Version 10.9.5)
Hi,
I have MacBook Pro (OS X Version 10.9.5). I am unable to see Microsoft-Lync.log. I am following this KB https://support.microsoft.com/kb/2629861?wa=wsignin1.0
thanks in advance
Sagir.Yes i found Solution:
we need to enable Hidden files by running below command from Terminal on MAC OS:
defaults write com.apple.finder AppleShowAllFiles YES
Thanks,
Sagir. -
Macbook pro late 2011, version ......DV14 getting very hot
Macbook pro late 2011, versin ....DV14 getting very hot
Bahamaguy wrote:
I have a MacBook pro late 2011 version it's not booting up ....
So what you want is to be able to boot from OS X and retrieve your files
Create a data recovery/undelete external boot drive
Of course if it's not booting up, it's easier to fix in place
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
"Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
Most commonly used backup methods
So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
There is no Startup Manager option to choose what to boot from?
This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
What did you use to make the external OS X USB bootable drive? -
I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?
I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?
You probably need to upgrade your Mac software to 10.8.2 to handle ios6.
-
I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options
Bahamaguy wrote:
I have a MacBook pro late 2011 version it's not booting up ....
So what you want is to be able to boot from OS X and retrieve your files
Create a data recovery/undelete external boot drive
Of course if it's not booting up, it's easier to fix in place
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
"Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
Most commonly used backup methods
So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
There is no Startup Manager option to choose what to boot from?
This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
What did you use to make the external OS X USB bootable drive? -
Hello
My macbook pro is version MAC OS X V.10.5.8 and I'm trying to udate my itunes from10.6.3 to the most current version. However, when I try to do this I cant seem to be able to find the newest version of itunes- I'm receiving the message that I'm up to date with the latest version.
Any help would be greatly appreciated.You are for Leopard. To upgrade iTunes you first need to upgrade OS X. Start with Snow Leopard. You can upgrade further should you want to. But Snow Leopard will allow you to install the latest version of iTunes 11.1.5.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
HT3805 Installation of Aperture 3 on new Macbook Pro, upgraded trial version.
Can I intstall Aperture 3 on my new macbook pro if I initially installed it on my current macbook pro using the trial version and product key? The trial version of Aperture 3 is no longer offered on Apple's site.
Thanks.Can you tell me if there is a way to look up my product key?
You are welcome.
You see the serial number in the "About" panel on your curent MacBook. In Aperture's main menu bar select: Aperture > About Aperture.
You should have received the licence key by email, if you unlocked the Trial. Search your mail box, if you still have a copy of the email. I would archive it, in case you ever need a proof of purchase.
Regards
Léonie -
Does iworks come with new Macbook Pro? Which version?
I purchased my Macbook Pro last week and it is already asking me to update my iWork to '09. Can not find it on the website what came with the purchase. Please help! Is this right that it doesn't come with the latest version?
If it shipped with the computer and you need to ask, it's a trial version.
(61012)
Maybe you are looking for
-
My iPod shuffle erases songs when I plugg it back into my computer after I erase the songs I just put in it?
-
Inbound queue stopped processing messages
Inbound queues not processing the messages in XI server. it throwing the syserror. please advise.
-
Why is there increased overhead(performance) in NAV than DISPLAY attribute?
Hi, I understand that navigational attibutes lead to increased overhead because of the additional joins: The join between Fact table and dimension table ( I guess on DIM ID) and then the additional join between the Dimension and the Master Data table
-
Can't apply transitions to After Effects comps in Premiere Pro
Hi people, newbie Premiere user here (my boss is trying to convert me from FCS) :-) I downloaded the trial version of CS5 and want to learn as much as I can before my initial 30 days is up. My initial experience has been pleasant, but I've come up
-
I have been trying to log into my itunes account on my computer for a couple of days now and it keeps coming up saying i need to type my password in. But after i type it in it keeps coming up saying enter password (and yes my password is correct) How