My macbook pro external speaker not working! help please
My macbook pro external speaker not working! help please
1. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Pllug in the speakers.
Do they show up?
Make sure that Mute is not enabled.
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.
Similar Messages
-
Hardware Test on MacBook Pro running Mavericks not working, Help!
Hi Folks,
I am hoping someone can help me get the Apple Hardware Test working on my Mid-2012 MacBook Pro (model 9,1) running OS X Mavericks v10.9.5.
It came with Mountain Lion pre-installed. I successfully ran Apple Hardware Test when I received it by holding D while powering up. No problem. Since then I have done nothing involving OS X other than installing Mavericks.
Recently I have installed some RAM and wanted to test it. I find the Apple Hardware Test no longer works. The mac simply boots into the username screen as usual.
Here's what I've tried:
0. Reading instructions on Using Apple Hardware Test - Apple Support. Ensured Mac was plugged in, and confirmed I pressed D prior to grey screen, and confirmed I held it down. No effect.
1. Pressed Option-D while powering up. No effect.
2. Searched for .diagnostics directory in /System/Library/Core Services/.diagnostics
It didn't appear to be there. (I don't know why, I can only guess that the upgrade from Mountain Lion to Mavericks must have hosed it)
So, I found instructions on how to obtain the AHT .dmg file for my version of MacBook Pro and downloaded it.
It's at this link by the way:
http://download.info.apple.com/Apple_Hardware_Test/022-5879-A.dmg
Then copied the .diagnostics directory from the .dmg into the /System/Library/Core Services/ directory on my HDD.
Tried again, pressing D after powering up. No success. Option-D, same thing.
So, I don't know what else to do. IEverything I have read indicates the test should run. It doesn't.
Can anyone help?
BTW: I don't have an install disk. System came with Mountain Lion pre-installed and I subsequently upgraded to Mavericks a while later.
Thanks in advance,
- BSForget the code yoyu have a hardware problem. Only Apple, or a AASP, knows the codes and what they mean. Take it to a genius bar.
-
I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?
You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
My macbook pro retina is not working camera after updating Mountain lion.
My macbook pro retina is not working camera after updating Mountain lion.
I have also updated to latest update 10.8.1. Still its the same.Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
HP pavilion dv6 microphone not working . help please . . .
HP pavilion dv6 microphone not working . help please . . .
Hi,
DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
You may wat to try this first:
1. Right click speaker icon (right hand corner)
2. Select Microphone devices
3. Right click Microphone
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
on my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!
Could you please describe how you are trying to delete a single text message and it will not work? What are you seeing in place of the trash can icon?
-
IPhone4S external speaker not working
i hv try clear the headphone jack but not working,
clear the dust outside the speaker not working
what else can i do, as i don't want to update my mobile which it might coz all the memories within the mobile lost....
what to do??RRFS Northern Nevada
Re: External speaker port not working
May 11, 2012 8:25 AM (in response to Tremolo Arm)
A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
PROBLEM SOLVED!!
Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
This is a very inexpensive solution and works great for me. I'm listening to my Bose speakers now and they sound great!! Thank you to all of you for your suggestions and help troubleshooting. -
when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Hello
I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please
-
When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please
Try closing all apps in Multitask Window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen -
Right speaker on Macbook Pro (with Retina) not working..
Bought Macbook Pro with retina display yesterday and just noticed sounds is only coming from the left speaker. I've checked on system preferences and when I turn the left hand speaker down there is no sound. Is this a manufacturing error or something I need to do?!
Hi,
Not a lot to go by from the lack of detail in your post, however let me try to help.
[note I may not follo up on your response - just a heads up as i'm very busy [ arent we all]]
Anyway, I bought a HP Pavilliion 500 the other day. and was stoked - awesome machine at a great price locally.
So after plugging in my Altec Lansing 6.1 surround sound speakers using the brown/black/green colour coded input plugs on the back of the PC's audio card (built in) - to correspond with the cables on thealtec lansing, I noticed that 2 speakers were working at the same time, and another speaker did work at all.
I spent about an hour or 2 pulling hair until I finally turned everything off, then plugged it in, then turned n the speakers and then the PC - voila - the speakers were working, one thing I had to do though was move them around as the front right speaker was now the middle etc, no biggy - just moved the speakers around...
PS: there was a siding button on the back n my speakers that allow full 6.1 or stereo - which I hd to change to get it to work.
Also on the altec lansing model I have I had to adjust the surround knob on the main speaker control to #10 for surround for the speakers to work individually.
I hope it helps you somewhat?
Check what inputs you are using. Check the inbuilt sound control software, in my case it was DTS Audio Settings, which allowed me to tweak things a bit.
Sometimes yes it is hardward,but when you know your have "known good speakers"as I did, and a brand new PC - which in theory should handle the speakers I am using, then it can be a combination of trial and error to get them working...
I gues you have the latest drivers, and if you dont have any great input options (ie: if you only have headphones socket) and are using stereo - ty some headphones? - as sometimes it can be the cable socket itself which is just built slightly different so the speakers dont all come thourgh like they should...
Cheers
andy -
My macbook pro late 2011 not working, Yosemite ? please help me
I AM SO SAD.
SECOND DAY OF SADNESS .
WHITE SCREEN BLUE SCREEN EVERYWHERE .
I don't know how to explain myself well so i try tell you guys by order of what heppand (macbookpro late 2011 i7 16giga ram)
so that's what happened;
1. i have a macbook pro i am happy its working amazing with mavericks
2. i love apple (RIP Mr Steve Jobs) So i downloaded a BETA of yosemite and installed it (i sign in the beta download it and install it 3/4 months ago I have TM to.)
3. i don't like it after a week, it was in his diapers and almost all with problems.
4. i connected my TM and restore my old computer.
5. i notice that some times the upper bar (finder and clock is kind of see-throgh and the clock is stuck.
6. i got some times blue screen when i started my computer, but i always got it runing after reset.
7. i got some wormup and reset by-him-self problems. but just SOMETIMES.
8. two days ago,i came home,and my computer was hot, and black screen.
9. i reboot and i always got that same blue weird screen or gray.
10.ive trid - recovery from the Internet - gray screen,open recovery disk - grey screen, i fsck like 5 times and nothing happen fsck said all is good with hd
11.i went to the store and bought a new 1 tera Toshiba HD
12.no recovery from the Internet like before, its just coming back to grey screen.
13.i take out my new HD and conected it to another mac,and made it mac format
14. i made a bootable yosemite on usb from terminal
15.i connected it i can see the bar going just with apple logo and then ? yes gray screen again.
16.im on apple discussion, somtimes looking at my macbook pro, with some tears but it will be ok
CUS YOU HAVE TO HELP ME I TRUST YOU .
THANK YOU FOREVERThe moderators deleted the image that I had in my first response because I has the battery serial number displayed.
Here it is again from System Information>Power. Would you please post from your MBP and we might pick up some useful information.
Also run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
Ciao. -
2008 Macbook pro left click not working properly after upgrading to 10.6.8
I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything. I have tried plugging in a mouse, but when I do so the mouse also behaves the same way. The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
I tried deleting com.apple.driver.AppleBluetoothMultitouchTrackpad.plist and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?I started having the same issue after update. I'm on a MacBookpro running 10.7.2
ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working. Two days later problem was back. I then did a reboot and the computer was back to working. Today the computer worked fine tell it went to sleep. I had to do a hard reboot to get the Mac up and running and now no left click. Please help. I can not use the Mac with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working. One other item when you go to pick your user at startup the left mouse click works. Help! -
External Speaker not Working Properly
Ok, i have this annoying problem with the external transducer...basically sometimes it works and sometimes it doesn't.
This kinda disrupts all the allarm options as i can't rely on a device that "eventually" will work.
This is the second iPod Touch i change and the problem is the same so i guess it is not an hardware fault but most likely software.
Has anyone ever encountered a problem like this one?
Message was edited by: OneOfTwoRRFS Northern Nevada
Re: External speaker port not working
May 11, 2012 8:25 AM (in response to Tremolo Arm)
A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
PROBLEM SOLVED!!
Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
This is a very inexpensive solution and works great for me. I'm listening to my Bose speakers now and they sound great!! Thank you to all of you for your suggestions and help troubleshooting.
Maybe you are looking for
-
Excise getting calculated on header level
Dear All , When I make PO for 2 items with same vendor one with Excise and other is without excise , system calculates excise for both the items on header level . But ideally it must be for one item which is applicalbe for Excise . Please guide Detai
-
Cannot make a wireless connection to a printer?
I have 2 PC's, each having its own printer connected directly to it. The first PC is wireless and uses an HP printer. I have no trouble printing from the mac to this printer. The second PC is the primary computer attached to the router. It has a Dell
-
I installed Final Cut Epxress 4 on my laptop and my macbook and then accidentally also migrated FCE from the desktop to the macbook. Now each time I launch FCE on the macbook it asks for the software serial number. I enter the number which is then re
-
Importing text in Premiere Pro
Hi, I'm editing a video in premiere pro. I have designed various typography layouts in Indesign which are going to be layered over the top of the video. I'm currently exporting the text from indesign as an interactive PDF before opening it in illustr
-
How to deactivate unwanted Photoshop CS3 installations?
I posted the following question a couple of months ago: "I still own a copy of Adobe CS3 Design Premium, but it is not currently installed on any computers as far as I know. Nevertheless, after installing Photoshop CS3 on my old G4 powerbook, I could