My MacBook Pro freezes after opening any application or trying to update

HELP!
I haven't used my mac for a while and when I booted it up, I did all my usual things when I didn't use my mac for a long time, like opening software update. But software update froze after trying to download a firmware and iTunes update. I thought this was bad luck so I did a hard shut down and restarted the computer after 5 min. When I got back on I reran software update and the same thing happened. I did another hard restart and didn't run software update, but with every other application it froze as well!
I ran extended hardware tests that didn't come up with anything. I took my Mac to be serviced but they couldn't detect the problem. I reinstalled OSX from the disc and didn't work either.
When it freezes all animations are not stopped, like the progress bar animation. But the dock doesn't magnify when I hover over it, nor does the toolbar at the top work. It just does the spinning cursor when I move the mouse over the desktop.
Now I can't even open the settings and change something without it freezing, nor could I use it for more than 3 minutes.
Help will be greatly appreciated!

Similar Messages

My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components.

I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

You may have more of a chance getting a quicker answer here:
https://discussions.apple.com/community/windows_software/windows_compatibility

Macbook pro freezes after login

I have a mid-2010 MacBook Pro 15" with a Core i7 2.66GHz processor. Sometime after upgrading to Lion, I started getting the spinning beachball of death just after login. Unlike many posts about freezes on similar MacBook Pros, mine is not freezing before login, but after. I start the machine, login, and then if I try to open any application, the beachball appears and I have to do a hard shutdown with the power button. Then if I restart again, it is usually fine. I was able to fix this problem some time ago by deleting a preference file (plist) for one of my apps (I think), but the problem has surfaced again and I cannot remember how to correct this. Anyone having similar problems, please let me know if you've had any luck fixing it. I am running 10.7.3 (in fact, it seems like the problem may have resurfaced just after the update to 10.7.3, but I'm not sure.)
FYI, I have auto graphics switching off and am still experiencing this problem.

Don't worry about the auto graphics switching. Go to "Users & Groups" in system preferences. Then click on login items and removes all of them. I haven't pinned down exactly which one was causing the problem but I suspect it was one associated with my HP printer. I have verified that Dropbox and Magic Menu from StuffIt are OK to leave in the login items. Just remove what you have there and add them back in one at time (if you can't live without them) until it starts to give you trouble again. Let me know if this helps.

MacBook Pro Freezes When Viewing Any Video with new iTunes

I, too, am having problems with the latest iTunes update. My MacBook Pro freezes completely. Total lock-up. This happens when trying to view any video, including video podcasts. I have to hold down the power button for several seconds to get my laptop to turn off. Any other MBP users experiencing this?

Hi there, I have the same problem as you guys, everything was fine before iTunes 7.6 or iTunes 7.6.1 I tried both, before those updates I could watch any video in iTunes without any issue, after that when I play a video, a random video my Macbook freeze totally, sometimes comes alive but 90% of the cases I have to make a hard shutdown (press and hold the power button). I can't believe this kind of bugs in a software that is so mature. Help please!

Brand new Macbook Pro freezes after iTunes-update??

Updated itunes to 10.5.1 last night and now itunes and my brand new Macbook Pro freezes whenever I open iTunes. I got it last week and it has worked perfectly, but now it freezes and has trouble finding the wifi. What to do?? Can I somehow undo the update?

Is this Java based game Runescape? I experience the same crashes, ive tried using other things in-game other than the OpenGl and i still experience crashes, much more often when i have iTunes running while trying to play. Ive never had problems like this before, even while using older computers with much less memory, etc.. This is my first mac and id have to say it's not leaving a good impression. I planned to be able to play some games on this and consider Runescape requires very low CPU this is kind of sad that a Mac can't process it without crashing. Ive been reading lots of similar posts online and it sounds like Apple should be worried more about customer satisfaction than their own stocks. Hope something works out soon!!

After system date/time reset macbook pro can't open any programs and access system preferences

Hi,
Booted my macbook pro 2009 and the time was reset to 2001, a prompt asked me to change settings or else the computer might function erratically. So i changed the date and time settings as suggested but then suddenly it stopped working. I restarted the computer but i could no longer open any programs. My dock was gone, the screen background was changed back to the original and i couldn't access the system preferences. Every time i click on the apple icon the screen just refereshes and that's it.
My laptop hasn't been turned off for the last 48 hrs before this happened. i was working and uploading huge files to dropbox and since my internet connection was really slow, i had to keep it on so it would upload continously. Was thinking this might have caused some malfunction.
Has anyone experienced this kind of issue?

You need to charge the computer, perhaps the battery went dead.
Do a SMC and PRAM reset, see if that assists.
Also hold the shift key after that upon boot, that will fix things
https://discussions.apple.com/docs/DOC-3046
If you get into your account, see if system preferences opens and try to set the time and date, align with Apple's servers, reset the screen saver and desktop picture see if it holds upon a reboot
If not your going to have to delete your
com.systempreferences.plist
file in your
"User"/Library/Preference folder
Reboot the machine and then open System Preferences and reset your preferences.
Now in 10.6, the "User"/Library/Preference folder is not hidden
In 10.7 the "Users"/Library/Preferences folder IS hidden
so in 10.7 you need to use the Finder > Go To Folder and type
/Library/Preferences
and click OK
Then scoll down to the file above, there will be two of them perhaps, one is a lock file the other one you can Trash, so do that and reboot.

Macbook Pro Freezes after wake up from sleep

My Macbook Pro 5,5 with mountian Lion freezes after waking up from sleep. i have 8 GB RAM and did a hardware test wich was passed. I also have a SSD of 240 GB in the optical drive. this is my startup drive. Another HD is my workdrive. The first thing I see is that the Airport does not come back and it seems that is does not wake up. After that the whole finder freezes.
What can be the problem?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Macbook pro freezes after sleep, after 6 months of not having that problem

Hello,
I'm really frustated with my macbook pro. Like the tittle says, my computer freezes after waking up and the only thing to do is use the On/Off button. It is a macbook pro '13 2010.
This problem first happened around 6 months ago. Around Feb '11, i experienced the same issue. First thing i noticed was that the wifi suddenly stopped working. To try to fix it, I turned airport off and then couldn't turn it back on and had to restart my machine. Then when closing the lid and then opening it again, my computer would work for about 5 min and then freeze. Nothing worked and I had to shut it down using the power button. Then the problem got worse because the computer started freezing randomly. I know it wasn't an application problem because it happened using different apps. I took my computer to an authorized apple service provider and they told me the harddrive had some bad sectors i think, and they replaced the harddrive because I was still under earranty at the time.
Now, Sept '11, the problem came back. First the airport problem happened and now my computer freezes when waking up, the exact same thing that happened 6 months ago. I went to disk utility and repaired disk permisions and still no solution. My warranty expired last month so calling apple won't be of any help. I installed lion the day it came out and was working without any problems until now, so I don't think lion is the problem.
Has anybody had this same problem with their computer? I don't know what to do or how to tell if my harddrive is causing the problem again.
Thanks

All of the new unibody MBs/MBPs can use (6GB 4X2GB)
But yes you should definitely make sure the RAM is seated correctly and you didn't touch the gold part of the RAM during installation. Though if something was seriously wrong it would have made loud obnoxious sounds while you tried to start up.
Aside from Installation issues, you should reset the PRAM as noted previously. Hold down command-option-p-r at startup until it chimes twice.
OP, looking at Super Talent's website they don't even have 1066MHz chips listed in their DDR3 chips. All I see is a jump from 800MHz (DDR2) to 1333MHz (DDR3).
Either way, I can't imagine you got that great a deal for the RAM that even if it is seemingly the correct RAM you can get better deals in the links I posted in my other post.

MacBook Pro freezes when open Adobe products

I use my MacBook Pro connect to an iMac in Target Display Mode, everything works perfect. When i use my Macbook standalone (not connected to iMac) and open Adobe products it freezes and have to restart. Why does does this happen yet when connected to the iMac it is fine (never freezes, ever!)

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Macbook pro freezes & after a hard restart i get a grey screen & horiz bar

i have a intel 2.3ghz macbook pro that is freezing up... and the only way to unfreeze it is to do a hard restart.... then when it is starting i get a grey screen with a while apple logo and a horizontal progress bar near the bottom of the screen? the computer seems to run fine after it starts until it freezes again... usually it freezes a couple of times a day... i have run disk utility and repaired the permissions and also done a disc check.. the disc check said that the hard drive was ok.... i have backed it up via time machine and superduper back up... my laptop is running osx 10.6.7 and it says that the software is up to date... the hard drive is a 500 gig hitachi and was replaced a couple of months ago... i have 105 gigs of free space... any ideas on what is going on? and what i can do to fix it... i am heading out of the country for a couple of weeks on monday...

I reloaded OS X 10.6 with the install disk (CD) and then upgraded back to 10.6.6 using the downloadable 10.6.6 Update Combo file from the Apple site. Below was the exact sequence:
1. Download 10.6.6 Update Combo file connected via a direct ethernet connection. I wasn't able to accomplish the download via wireless because my computer crashed before I could get the entire file. I saved this on an external hard drive, also, just in case. I also backed up vital files.
2. Reinstall 10.6 via install disk. Put disk in drive and restart holding down "C", per the instruction blurb on the CD. This took about 45 min. Note that the "progress" time didn't seem to match what was going on.
3. After the 10.6 install was complete, I opened and ran the 10.6.6 Update Combo
After (3), everything has been fine. Total time was about 1 hr. All of my files/programs seem to have made it through untouched.
I've been tempted to try the 10.6.7 Update, but am still gunshy from the experience. I have a feeling that if one were to use the 10.6.7 Update Combo in (3), things would work out fine. I'd love to know if this is the case, but for right now, I'm pretty happy that my computer is back to normal. Hope this helps.
BTW I think you can probably restore via Time Machine, but the above is what I did.
Message was edited by: Jonlove

Macbook Pro freezes after upgrade to WD 1TB (WDC WD10TPVT-00HT5T1)

Hi All,
I upgraded my Macbook Pro to 1TB of sweet space. I choose to upgrade to Western Digital 1 TB. Got it from Amazon and following are the drive details:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10TPVT-00HT5T1
Revision: 01.01A01
Upgrade was simple enough as the steps are well documented on multiple sites. I chose to install fresh copy of Mac OS from Install DVD. I migrated applications and documents using MacOS Install System Wizard. Everything went fine and I started enjoying this massive space available at my disposal.
Problem started happening when my laptop freezes regularly (every 30 minutes or so). It recovers after 30 secs period. I went through multiple discussions but could not find any mention of it. All 1TB owners are happy and never reported this problem. I started digging in OS logs and found following log:
+Dec 5 08:04:53 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
+Dec 5 08:34:53 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
+Dec 5 09:04:53 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
+Dec 5 12:14:02 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
Next time when my laptop froze, I found same line is system log. I decided to run SMART tests on my drive. It reported SMART is disabled on my new drive.
I enabled it using following commands:
+smartctl -s on /dev/disk0+
+smartctl 5.39 2009-12-09 r2995 [i386-apple-darwin10.4.0] (local build)+
+Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net+
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
I am still facing the same freezing problems. I tried running some SMART tests and here is the output:
+sudo smartctl -T permissive -a /dev/disk0+
Password:
+smartctl 5.39 2009-12-09 r2995 [i386-apple-darwin10.4.0] (local build)+
+Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net+
+=== START OF INFORMATION SECTION ===+
+Device Model: WDC WD10TPVT-00HT5T1+
+Serial Number: WD-XXXXXXXXXXXX+
+Firmware Version: 01.01A01+
+User Capacity: 1,000,204,886,016 bytes+
+Device is: Not in smartctl database [for details use: -P showall]+
+ATA Version is: 8+
+ATA Standard is: Exact ATA specification draft version not indicated+
+Local Time is: Sun Dec 5 12:43:23 2010 GMT+
+SMART support is: Available - device has SMART capability.+
+SMART support is: Disabled+
+Error SMART Values Read failed+
+Smartctl: SMART Read Values failed.+
+Error SMART Thresholds Read failed+
+Smartctl: SMART Read Thresholds failed.+
+=== START OF READ SMART DATA SECTION ===+
+SMART overall-health self-assessment test result: PASSED+
+General SMART Values:+
+Offline data collection status: (0x00) Offline data collection activity+
+ was never started.+
+ Auto Offline Data Collection: Disabled.+
+Total time to complete Offline+
+data collection: ( 0) seconds.+
+Offline data collection+
+capabilities: (0x00) Offline data collection not supported.+
+SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented.+
+Error logging capability: (0x00) Error logging supported.+
+ General Purpose Logging supported.+
+SCT capabilities: (0x7035) SCT Status supported.+
+ SCT Feature Control supported.+
+ SCT Data Table supported.+
+Error SMART Error Log Read failed+
+Smartctl: SMART Error Log Read Failed+
+Error SMART Error Self-Test Log Read failed+
+Smartctl: SMART Self Test Log Read Failed+
+Device does not support Selective Self Tests/Logging+
It still report SMART is disabled and lot of tests failed.
I then tried Smart Utility and I ran short tests using it. It got stuck and I had to cancel the test. I got following message in system log.
+Dec 5 14:12:45 macbook-pro SMART Utility[1828]: smartctl returned error message: A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.+
Is somebody else experiencing this issue? I will be really thankful if somebody can help me to figure out the problem and potential solution.
Thanks

No idea what's wrong with your drive, but the best thing to do is to bug Western Digital about it. Be sure to have the serial number when you call. they can help you to troubleshoot it, and if they determine it is faulty, they should replace it under warranty.
I've not heard of this kind of problem before. How did you format it?
If this drive has the built-in shock guard technology, there may be a conflict with Apple's built in Sudden Motion Sensor. If so, you can disable the Sudden Motion Sensor and see if this helps:
http://support.apple.com/kb/HT1934
Good luck!
Message was edited by: S.U.

Macbook pro freezes when open finder

Hi, I have a problem with my macbook pro, since mountain lion os 10.8.2 update, every time I open the Finder freezes and I have to shut down my macbook with the button, because it does nothing, it only happens when I open the finder , which may be the problem?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

MacBook Pro Freezing After Screen Replacement

I recently took my MBP in to get the screen replaced due to a screen separation issue. When I got it back it froze every now and then, but it kept continuing. Everytime I restart the computer after a freeze it will freeze up sooner and sooner. At first I thought it was a RAM issue since it particularly did it while watching videos, so I bought new RAM and it continued to freeze. Tested the new and the old RAM, but they were fine. I took it to the Genius Bar and the guy said it was a failing harddrive. Got a new harddrive upgraded to Lion and it is still freezing. I asked if something could have gone wrong when the screen was replaced and he assured me no and even if something had gone wrong they wouldn't cover it unless the actual screen was broken.
If I leave the computer off for a day it will take about 30 min before the 1st freeze, then after restart about 15 min, then 10 min, then 5 min until it will only log in then freeze.
Any guesses as to what could be causing the freezing and if it would be worth fixing as this MBP needs a new battery, a new drive (since the drive is on loan), and has the flickering screen issue?
Late 2008 MacBook Pro
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Software Mac OS X Lion 10.7.2 (11C74)
Out of warrenty
Screen Replaced Jan 8, 2012

Thanks for the reply. As an update, I took it into the Apple store again and it froze while they were trying to run the test. This time the guy said it was covered by the repair warrenty. After 2 weeks without a computer because something was wrong with the graphics cards they called me back and said they were just going to give me a late 2011 mid-range MBP. So I currently have a brand new MBP with no issues
Yeah... 3.5 years and they just release that fix for flickering screens. I hope it works for everyone. I know some people had some major issues with it.

17" MacBook Pro freezes after Capture to external hard drive!!!!!! HELP!!

Ok, so i just got my new MacBook Pro and Final Cut Studio last week, and i was so excited, until this happened. I was trying to log and capture a clip to my 500GB LaCie Big Disk and everything seemed to be going fine until the clip got to the end of it's alloted time and then the computer just froze. When I closed the lid and let the laptop sleep and opened it again the clip is in place and everything seems fine. I tried capturing then w/ the LaCie plugged into the FW8oo port and my miniDV Deck plugged into the FW4oo, and it froze again after capture and then worked fine after closing the lid. Thinking I was crowding my Fire Wire bus I hooked up an external USB 2.0 drive and my deck to the fire wire , but the same thing happened. So then I tried capturing to my internal and it worked fine. I've captured to an external on my 17" iMac G5 w/ Final Cut HD for years and never had a problem. Any tips? This closing the lid thing just isn't going to work.
MacBook Pro 17" Mac OS X (10.4.6)

nope, david is right on the mark. powermacs with one firewire bus choke like this. i can't understand why apple continues to design with one firewire bus but i'm not a designer. anyone, ANYONE who uses firewire harddrives and firewire tape machines/cameras for editing NEEDS to invest in a seperate sort of firewire card (pick your flavor) and then we'd see this behavior go away. then there will be those that will whine "this never happened before!" it's happening now, firewire cards a cheap insurance against these issues.

My MacBook Pro freezes after opening any application or trying to update

Similar Messages

Maybe you are looking for