My MacBook Pro freezes when i log in. 10.7.4

This started aminly after i got 10.7.4. When i open my laptop i can log in but then i cant do anything i can move the mouse but cant click anything i try to force quit the aplications but cant click anything i end up having to shut down my computer every time i open it pls help but the first time i poen my computer after i shut it down its fine?! please help
-sincerly Griffinmalone

Dropping it more than likely made it worse. The only thing I can suggest is to take the MBP back to the repair shop for diagnostic testing which is FREE!
NOTE: Apple Care nor the standard warranty does not cover accidental damage. You will be responsible for the repair costs (which are usually more than the cost of the computer).
The good news:
If you have homeowners or rental coverage check w/them. Most policies cover accidental damage.
If you purchased your computer w/a credit card, check w/them also. You just may be covered.

Similar Messages

My macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this

My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this.My OS is OS X 10.6.8.

Usual first things to try are a smc and pram reset.

Macbook Pro Freezes When USB Plugged In

Just like the title says, my Mid 2012 Macbook Pro 13 running 10.8.2 freezes for an averge of 15 seconds whenever I plug anything into the USB ports. It varies depending on what is plugged in. Phones, both iPhone and Android make it freeze for about 15 seconds, USB drives are usually just a couple seconds. I dont even know where to begin when trouble shooting this. Any ideas? Thanks in advance.

Hi guys,
I have the same problem with my MacBook Pro. When I plug in any usb device I get a short freeze of the pc for about 5 seconds. During my tests, I noticed that the freezing starts from the first time that i move the touchpad. It means that if I plug the usb device and I move the touchpad after 30 seconds, I get the freazing from that time for 5 seconds. if I continue to move the touchpad while I plug in the usb I don't get any freeze. Moreover, I noticed that if in the meantime that I plug in the usb I move the touchpad without any interruption, I don't get any freezing.
I don't know if the problem could be related to the touchpad or not... Help!!!
Here my log:
24/02/2013 22:12:44.000
kernel[0]
USBMSC Identifier (non-unique): 088810000000 0x1f75 0x888 0x15
24/02/2013 22:12:45.770
tuxera_ntfs[8574]
Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
24/02/2013 22:12:45.770
tuxera_ntfs[8574]
Mounted /dev/rdisk3s1 (Read-Write, label "Data HD", NTFS 3.1)
24/02/2013 22:12:45.770
tuxera_ntfs[8574]
Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners,nosuid,adap tiveuid,adaptivegid
24/02/2013 22:12:45.771
tuxera_ntfs[8574]
Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners ,nosuid,allow_other,nonempty,relatime,fsname=/dev/disk3s1,volname=Data HD
24/02/2013 22:12:45.771
tuxera_ntfs[8574]
License: Valid.
24/02/2013 22:12:45.771
tuxera_ntfs[8574]
Ownership and permissions disabled, configuration type 1
24/02/2013 22:12:45.991
fseventsd[44]
check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x1041d1528)
24/02/2013 22:12:46.076
fseventsd[44]
log dir: /Volumes/Data HD/.fseventsd getting new uuid: C8912524-D7CB-46FE-99AE-420260B97608
24/02/2013 22:12:50.000
kernel[0]
USBF:
107857.423
AppleUSBEHCI[0xffffff8014dc8000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1d, timing out! (Addr: 2, EP: 0)
24/02/2013 22:12:50.511
hidd[43]
MultitouchHID: device bootloaded
24/02/2013 22:12:50.000
kernel[0]
AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
24/02/2013 22:12:50.000
kernel[0]
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized

Why does my macbook pro freeze when updating my iPhone to iOS 4

when i try to uodate my iphone 4 to ios 5, my macbook pro freezes up in itunes and i cant use it. i try to close out but nothing works, it cant force quit, and it just doesnt like me. please help!

Everyone is trying to update their iPhones. The servers get clogged. Wait several days and try to do it at an off peak time.

MacBook Pro Freezes When Viewing Any Video with new iTunes

I, too, am having problems with the latest iTunes update. My MacBook Pro freezes completely. Total lock-up. This happens when trying to view any video, including video podcasts. I have to hold down the power button for several seconds to get my laptop to turn off. Any other MBP users experiencing this?

Hi there, I have the same problem as you guys, everything was fine before iTunes 7.6 or iTunes 7.6.1 I tried both, before those updates I could watch any video in iTunes without any issue, after that when I play a video, a random video my Macbook freeze totally, sometimes comes alive but 90% of the cases I have to make a hard shutdown (press and hold the power button). I can't believe this kind of bugs in a software that is so mature. Help please!

MacBook Pro freezes when trying to shutdown

My macbook pro freezes and the screen turns blank when i try to turn it off. instead i have to hold down the power button and get the "mac os x shut down or something" message. it happens randomly and i cant figure out what to do. i have tried all of the restarts and have done a virus scan, although i know macs dont get viruses. any help?
2.2 GHz, 2 GB, 128 Video RAM, 15in Leopard, Intel Core 2 Duo

Please post the specs of your macbook pro including hard drive size and amount of free space, graphics card, and installed RAM. This will help folks help you.

MacBook Pro freezes when I try to open anything

Whenever I boot up my MacBook Pro, I let it warm up for about 5 minutes. Then, when I try and click and click on anything, like the browser, the whole computer freezes and the only thing I can do is force it to shut down by holding down the power button. Then I boot up into safe mode, restart the computer and everything works fine. Anything know what the problem is? Thanks

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

MacBook Pro Freezes when waking up..

My MacBook Pro has started to freeze up, everytime I try to wake it. When ever I'm done using my Mac I simply Log Off and close the lid. When I return I open the Lid. And thats when I get the Log In screen, and the spinning beach ball. It never seems to time out. I have to do a hard reset by holding the power button. I searched the support page. And Apple's recomendation was to DL EFI update1.9 . (My Mac Book is a Mid 2010) But when I try to run it I get an error message: Software not supported by your system. Does anyone have any suggestions...
Thanx

Last resort, but if it fixes your problem then I guess that is a plus. If you are under warranty, I would suggest you cash that in while you can. Please reads the risks or unsaved work:
So here is how to change power management (Hybernation) to see if this fixes your problem:
You can change the way your computer hybernates from hybernatemode 3 to 0.
3 = RAM is powered on while sleeping, but RAM contents are also written to disk before sleeping. In the event of total power loss, the system enters hibernation mode automatically. The downside to this mode is that it is very slow. The upside is that it is very unlikely that you will lose any unsaved work should your mbp lose power.
0 = RAM powered on while sleeping, safe sleep disabled, and super-fast wake. The downside to this mode is that it does not save any of your work, should your mbp lose power, and you would have to remember to manually save before putting to sleep. The upside is that your computer would sleep & wake up in around 2 seconds.
Go to Terminal & type:
pmset -g | grep hibernatemode
That should give you a result of 3.
To change it to 0 type:
sudo pmset -a hibernatemode 0
It might ask you to enter your password.
Then delete the old sleepimage file:
cd /var/vm
sudo rm sleepimage
Just remember, saving will have to be done manually by you,

Macbook pro freezes when open finder

Hi, I have a problem with my macbook pro, since mountain lion os 10.8.2 update, every time I open the Finder freezes and I have to shut down my macbook with the button, because it does nothing, it only happens when I open the finder , which may be the problem?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

MacBook Pro freezes when open Adobe products

I use my MacBook Pro connect to an iMac in Target Display Mode, everything works perfect. When i use my Macbook standalone (not connected to iMac) and open Adobe products it freezes and have to restart. Why does does this happen yet when connected to the iMac it is fine (never freezes, ever!)

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

MacBook pro freezes when volume button is pushed

When I log in if I press the volume button up down or mute my MacBook pro 13 inch 2011 will freeze for a few minutes then act normal...i have reset pram and smc multiple times and problem persists...any guess what it could be?

Welcome to Discussions, MeadowsLing
Problems like those you mention are not unusual for new Mac users, but they are not widespread defects, either. They are usually easily corrected. Here is a good way to start.
For slow performance: http://docs.info.apple.com/article.html?path=Mac/10.5/en/8496.html
Also: http://docs.info.apple.com/article.html?path=Mac/10.5/en/8492.html
For iSight problems: http://support.apple.com/kb/HT2090
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Macbook Pro freezes when I unplug USB hub

When I unplug my USB hub from my Macbook Pro it freezes up and I have to turn it off and back on. I did not have this problem before, it just starting happening recently. The only thing plugged into the hub at the moment is my keyboard which has the wireless reciever for my mouse plugged into it. Any solutions would be greatly appreciated as this makes it a hassle to take my Macbook anywhere.
The USB hub is Gigaware brand, my keyboard is Apple, and my mouse is a Logitech MX Revolution, if that helps. I also have a LaCie 1tb external hard drive plugged in but that's using the firewire 800 slot so I wouldn't think that would affect it.

I have a somewhat similar problem with my Macbook Pro and USB hub - it just started happening last week as well. I have a USB (external power) hub that hooks to an audio interface, piano keyboard, wireless keyboard and mouse. I normally have my laptop off when I hook up the hub because I've been traveling. Last week I plugged it in while the computer was on and the hub froze. I turned off the computer and unplugged everything. I turned everything back on and the hub worked...for a few minutes. Now anytime I run any type of audio or video from the computer (itunes, LogicPro, internet video) the hub freezes as soon as I press play. Then the program (like Itunes) freezes and I have to force quit. This makes me wonder if it is not the hub but something that the computer is using to run audio and video. None of my external equipment has caused problems for a year now - there is no new equipment - and just the standard Mac software updates.

Macbook Pro freezes when I plug in USB

I've not changed anything about my Macbook Pro (13" early 2011) except upgrade to Mountain Lion (10.8.2) and now when I plug in my USB hub (which only has my keyboard, mouse and printer connected to it) the computer freezes completely and I have to press and hold the power button to restart it. If it doesn't do that, then it just doesn't recognise that the USB has been plugged in at all.
Is this an issue with the USB port or something else? I still have AppleCare so will take it to an Apple Store if I can't find out how to solve this problem myself. Anyone had this issue and found a solution?
Thanks.

Did you also try this when booted to the Recovery HD volume? If not then give this a try. In addition, while troubleshooting unplug all USB devices (includeing the keyboard) and try with another device such as only the mouse, which should allow you to move the cursor on screen. What you've done so far is only half of the picture, and doing this with the mouse both in normal boot and when booted to the Recovery HD partition would help determine what the problem is.
It is sounding like the issue is not with the printer and instead is with your computer, so hopefully its just a software configuration snafu, but it could be a problem with hardware.
If you find the mouse will not properly work in any port when booted to the Recovery HD partition, then run the Apple Hardware Test suite (see here: http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/, but do not run the "extended" test) and see if they bring up any problems. If so then write them down and post what they are here.

My MacBook Pro freezes when i log in. 10.7.4

Similar Messages

Maybe you are looking for