My MacBook Pro get warm and has low battery capasity
Apple say MacBook Pro early 2011 should have 7+ hour capasity. Mine dries out in less than 2 hour. Beside: The computer gets very warm, cannot contact to a table without damage the table.
GeirRasch wrote:
There is a program named AGAdminService i root that uses 90-100% CPU, may be this is part of the problem
Sure is, and plenty of people said a solution in this thread solved the problem: https://discussions.apple.com/thread/3191543?start=0&tstart=0
Similar Messages
-
My MacBook Pro keeps freezing and has become very slow...can anyone help???
Please can anyone help.....this past month my MacBook Pro keeps freezing and showing the beach ball....its also become very slow.
I still have lots of memory.
But this message is showing when i go to applications- utilities and console...
27/01/2013 22:41:39
kernel
disk0s2: I/O error.
does anyone know what this means and how can I fix it?
It seems to freeze more when I use the finger pad to move the mouse?
Its becoming very annoying especially when I'm trying to watch a programme on bbc iplayer.
Many ThanksYour hard disk is failing and requires replacement. Replacement is not terribly expensive and can be performed by someone sufficiently adept with computer repair. If that's not you, an Apple Store can perform the replacement.
Back up your data ASAP. -
Macbook Pro getting slower and slower, freezing all the time
Hi,
My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
Disk Information:
TOSHIBA MK5059GSXP disk0 : (500,11 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
JMicron USB to ATA/ATAPI bridge 500,11 GB
EFI (disk2s1) <not mounted>: 209,7 MB
Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1)
com.Cycling74.driver.Soundflower (1.5.1)
com.bresink.driver.BRESINKx86Monitoring (8.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
Launch Agents:
[failed] com.brother.LOGINserver.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
[failed] com.akamai.single-user-client.plist
[loaded] com.facebook.videochat.[redacted].plist
[failed] com.google.GoogleContactSyncAgent.plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
User Login Items:
uHD-Agent
GrowlHelperApp
Alfred
uTorrent
Dropbox
iShutdown
HyperDock Helper
Assistente de gestor de conteúdo
3rd Party Preference Panes:
Akamai NetSession Preferences
Fan Control
Flash Player
Flip4Mac WMV
Growl
HyperDock
Java
Internet Plug-ins::
DirectorShockwave: Version: 11.5.9r620
o1dbrowserplugin: Version: 4.9.1.16010
Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.20913.0 - SDK 10.6
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 4.9.1.16010
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
Bad Fonts:
None
Old applications:
Content Manager Assistant: Version: 1.10.4086.78 - SDK 10.5
/Users/duarte_cunharosa/Applications/CMA.app
Content Manager Assistant: Version: 1.10.4086.78 - SDK 10.5
/Applications/CMA.app
FacebookVideoCalling: Version: 1.2.0.157 - SDK 10.5
/Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
Miro Video Converter: Version: 2.6 - SDK 10.0
/Applications/Miro Video Converter.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
Plants vs: Version: 1.0.40 - SDK 10.5
/Applications/Plants vs. Zombies.app
RipIt: Version: 1.6.2 - SDK 10.5
/Applications/RipIt.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
UPlayBrowser: Version: 1.0.1.23853 - SDK 10.5
/Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
Time Machine:
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 698.32 GB
Total number of backups: 3
Oldest backup: 2013-12-20 18:10:54 +0000
Last backup: 2013-12-22 19:52:17 +0000
Size of backup disk: Too small
Backup size 698.32 GB < (Disk used 414.09 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% Transmission
4% Dropbox
2% WindowServer
2% Dock
1% Google Chrome
Top Processes by Memory:
123 MB Google Chrome
119 MB iTunes
102 MB Dropbox
87 MB Google Chrome Helper
66 MB Finder
Virtual Memory Statistics:
148 MB Free RAM
995 MB Active RAM
859 MB Inactive RAM
1.03 GB Wired RAM
7.80 GB Page-ins
4.84 GB Page-outsIf you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal. Please note:
☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
☞ When you type your password, you won't see what you're typing.
☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
☞ The commands don't change anything, and merely running them will do neither good nor harm.
☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply
☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
☞ Don't post the contents of the Terminal window.
☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply. -
Late 2011 macbook pro getting hot and running slow, any ideas?
In the last week my macbook pro has been getting very hot (too hot to rest on knees) and sometimes running slow. It will often cool down after a while but the fan seems to be running more frequently as well. Anyone have any suggestions? Thanks
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
Charge on macbook pro getting shorter and shorter..
Pack Lot Code:
0
PCB Lot Code:
0
Firmware Version:
3
Hardware Revision:
2
Cell Revision:
100
Charge Information:
Charge Remaining (mAh):
1157
Fully Charged:
No
Charging:
No
Full Charge Capacity (mAh):
4142
Health Information:
Cycle Count:
1221
Condition:
Replace Soon
Battery Installed:
Yes
Amperage (mA):
-2743
Voltage (mV):
10392
Help..."That guy" (me) does NOT work for Apple. I have never been employed in the computer or technology industry at all, and am now retired and beholden to no one. I've been reading and posting in the Powerbook and MacBook Pro forums here practically every day since 1994/5, and I've seen hundreds and hundreds of posts from people who bought worthless batteries from cut-rate vendors. These clunkers wouldn't take a charge, didn't have nearly the capacity they were advertised to have, never gave a low-battery warning before shutting down for lack of power, never reported their condition accurately (or at all, in some cases), couldn't be calibrated successfully, or were stone dead a month or two after being purchased, when the warranties on them proved to be imaginary because the manufacturer and/or the reseller couldn't be found.
I'm not plugging Apple batteries for machines that can use offerings from other manufacturers; some third-party batteries have consistently proved reliable. But third-party batteries selling for half or a quarter of what Apple charges are being produced with limited (if any) quality control, using components from who knows what Chinese factories, employing workers under God knows what conditions. Some of these batteries miraculously turn out
OK, and if you've gotten one, bully for you. A very large percentage of them (compared to Apple or NewerTech batteries) are duds, not worth even the little one pays for them. -
MacBook Pro getting slower and slower
My MacBook Pro has been slowing down, to the point of "click... wait 60 seconds... click... wait 60 seconds".
Around 8 weeks ago, headed on in to Apple Store, to find my Hard Drive was dead (we actually watched it die completely once they hooked it up to their network to try and save my stuff, that was the last straw for it). One new Hard Drive later and I've been happily enjoying my much faster Mac. Until the last week.
It's worse when I try and use AirPlay - extending desktop to TV to watch a movie, that just kills it.
I've run Disk Repair. I've cleaned out any start up items I could find. I know I probably could do with some more RAM, and I'll do that when the budget allows.
I used to be able to run InDesign, Illustrator, VLC, Word, Safari, AirPlay and Mail at once no issues - now it struggles with two tabs in Safari. Have I killed another hard drive?
EtreCheck version: 1.9.13 (49)
Report generated 13 August 2014 9:52:17 pm AEST
Hardware Information: ?
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:20:33
Disk Information: ?
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (384.81 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.ZTE.driver.ZTELTEUSBCDCACMData (5.0.1) Support
[not loaded] com.ZTE.driver.ZTELTEUSBMassStorageFilter (5.0.1) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.12) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.12) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.5) Support
[not loaded] com.zte.LTEdriver.cdc_ecm_qmi (1.0.2) Support
[not loaded] com.zte.LTEdriver.cdc_usb_bus (1.0.2) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[running] com.sierrawireless.SwitchTool.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
Searchme (Disabled)
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
3% WindowServer
1% Creative Cloud
1% fontd
0% sysmond
0% coreservicesd
Top Processes by Memory: ?
149 MB com.apple.WebKit.WebContent
115 MB Finder
74 MB CalendarAgent
66 MB ocspd
61 MB com.apple.IconServicesAgent
Virtual Memory Information: ?
1.38 GB Free RAM
1.37 GB Active RAM
301 MB Inactive RAM
973 MB Wired RAM
369 MB Page-ins
0 B Page-outsHad a look at the logs, and the following come up, the disk0s2: I/O errors seem to correspond with the freezing.
15/08/2014 9:33:32.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:33:53.000 pm kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x9800 ****
15/08/2014 9:33:57.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:34:16.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:34:36.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:34:55.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:34:55.610 pm syncdefaultsd[481]: *** -[IADomainCache init]: IA domains cache couldn't be read.
15/08/2014 9:34:55.610 pm syncdefaultsd[481]: -[IAPluginManager allAListPlugins] [546] -- *** warning: we're on the slow path.
15/08/2014 9:34:56.480 pm syncdefaultsd[481]: -[IAPluginManager allAListPlugins] [546] -- *** warning: we're on the slow path.
15/08/2014 9:35:14.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:35:33.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:35:33.927 pm com.apple.WebKit.Networking[240]: CFNetwork SSLHandshake failed (-9810)
15/08/2014 9:35:53.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:36:12.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:36:31.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:36:48.900 pm Safari[192]: Couldn't contact spell checker for Multilingual
15/08/2014 9:36:49.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:36:49.507 pm AppleSpell[417]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
15/08/2014 9:36:49.508 pm AppleSpell[417]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
15/08/2014 9:36:49.509 pm AppleSpell[417]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
15/08/2014 9:36:49.509 pm AppleSpell[417]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
15/08/2014 9:36:49.510 pm AppleSpell[417]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
15/08/2014 9:37:09.000 pm kernel[0]: disk0s2: I/O error.
15/08/2014 9:37:28.000 pm kernel[0]: disk0s2: I/O error. -
Late Macbook Pro getting hot and the fan is getting louder
My Macbook is getting very hot and the fan gets louder the longer I have my Macbook on.
It happens whenever and wherever I use it, I don't play games often as I use my Macbook for my Uni work.
Does anyone have any advice?It would help if you indicated the EXACT model MBP that you have.
Perform a SMC reset:
http://support.apple.com/kb/HT3964
If no success, open Activity Monitor to ALL PROCESSES and set %CPU to display values from high to low.
Download from the Internet a temperature monitoring app like Bresink:
http://www.bresink.com/osx/TemperatureMonitor.html
Post images of both for inspection.
Open the MBP and look for dust an debris inside it, especially in the fans. Clean it out if necessary.
Ciao. -
My MacBook Pro getting slower and slower, what do I need to do to speed it? Thanks.
Help to speed up my MacBook Pro.
By slower you mean starting up slower or during regular operation slower?
Login Items;
Over time, as you install more programs, they may be running at startup (login). Check what items are set to start during login.
Choose Apple menu > System Preferences and click Users & Groups.
Click your account’s name, and then click Login Items. Select the ones you dont want and hit the minus bar to delete from launching during log in.
For normal running processes;
Use Activity Monitor to see what processes and apps are using a lot of resources and then troubleshoot from there as to why certain programs are taking up more resources than normal.
Guide to using Activity Monitor;
http://www.thexlab.com/faqs/activitymonitor.html
For MAC processes explained;
http://triviaware.com/macprocess/ -
MacBook Pro not charging and says replace battery? or is this a different issue?
Ive been reading different responses and im not sure if this is a problem with my actual battery or if theres something else wrong and i need to reset my system somehow?
i have a 2010 macbook pro- snow leopard... and here is the battery info from my comp:
Battery Information:
Model Information:
Serial Number: 9G1130974D3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 0002
Cell Revision: 0158
Charge Information:
Charge Remaining (mAh): 0
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 0
Health Information:
Cycle Count: 111
Condition: Replace Now
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 9640
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: No
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x003676c7
Charging: NoYou can try a SMC reset:
http://support.apple.com/kb/HT3964http://support.apple.com/kb/HT3964
Follow directions for "a battery you should not remove yourself"
Usually this message means the battery is dead, if no change after the SMC reset take to an Apple Store Genius bar (make an appointment) and have it replaced. (it is 4 years old) -
After a year of owning my iPod touch 4g it suddenly stopped charging on my computer and outlet addapter. It still shows the two pronged plug icon that recognizes the iPod is connected to something but even as the battery level goes below twenty percent it will not charge. Still functions well and even connects to iTunes.
If it is still under warrenty which you can find out from here or if you know it's under one year old bring it to the Apple Store.
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Someone tell me what to do
Find my iPhone isn't helping
My iPod battery is dead and its offline. And it's with a lock and its in lost mode
Please help me I'm freaking out!!!!!!!!!!!!!Hi Juan,
Sorry for your troubles. If you did not have iCloud set up and Find My iPhone turned on, then you cannot track the phone.
Report it to the police
Change your AppleID password
Contact your carrier to see if they can block it
That's about all you can do....
Sorry,
GB -
Motion crashes - Macbook Pro Software update and Firmware update
Anyone out there that is working with Motion 3.0.1 on one of the new Macbook Pros (Santa Rosa) and has installed both the Macbook Pro Software Update 1.0 and the EFI Firmware update (for the 15 inch models)???
Motion 3 crashes on the Macbook Pros with the MBP Software update installed (see thread:
http://discussions.apple.com/thread.jspa?threadID=1028746&tstart=45
The solution so far is to wipe the hard drive and reinstall everything from scratch EXCEPT the software update 1.0. However, I'm trying to find out if anyone has installed the Firmware update, which requires the software update to be installed first, and if they are running smoothly.
???I just restarted then tried to open InDesign again and it let me download a java update that seems to have fixed it.
-
My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help
I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11. -
my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanksthanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.
-
I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.
Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
If you want it on both machines, you will need to likely buy another license.
Most developers are fine with transfering license between machines, you have to contact them.
They just want to make sure it's only on one machine so they are not getting robbed.
Maybe you are looking for
-
How to select column dynamically with sharepoint list as data source in ssrs report
Hi all, I am creating reports from SharePoint list but i have requirements to select the column name dynamically with SharePoint list as data source. I didn't find any way of doing this.. Can anyone help me to resolve this issue.. There is no way of
-
For those of you who read the news storys, and watch T.V. there was a recall on HP notebook Batteries. Apperently, if you dont replace the battery, it will cause safety issues. What are these "safety issues" you ask? YOUR COMPUTER WILL CATCH ON FIRE.
-
Old computer died, can't activate Lightroom on new computer. Invalid serial number error.
My old computer fried. Obviously, didn't deactivate Lightroom. Installed Lightroom on new computer but can't activate... getting invalid serial number error. Trying to get thru to Adobe is a joke. Help.
-
Hi, We have a requirement where we want to read the XML data from the CLOB column of a table. In OWB we are using the SYS_XMLGEN function for this. But when I use this in the expression it gives me error that 'SYS_XMLGEN' must be declared. I am able
-
My wired keyboard stops working a lot of the time. Message saying can't find keyboard and trying to connect to wired keyboard (which I don't use). If I close down and switch off at mains for 10 minutes or so Mac finds keyboard when starts again. Any