My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2.  USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head.   The fastest speeds you can typically get are about 300 Mbps.   Firewire, on the other hand, has very little overhead.  The fastest speeds you can get are very nearly 800 Mbps.  You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus.  Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it. 
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance.  A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters".  Your images must be managed.  You can Aperture manage them, or you can manage them.  But someone has to manage them.  If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge.  If you do, you'll break the links to your masters and start having problems with missing masters.  If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.)  There are only two kinds of hard drives in the world:  (1) those that have failed and (2) those that are going to fail.  There are no exceptions to this rule.  Hard drives are cheap.  Backup software is built into Aperture and into your Mac.

Similar Messages

  • MacBook Pro's storage is almost full.

    My MacBook Pro's storage is almost full.It is mostly filled with "other".What is the "other" that is taking up so much space and how do I get rid of it?

    See here for answer about the OTHER which is taking up space:
    http://pondini.org/TM/30.html
    and here:
    http://pondini.org/OSX/DiskSpace.html
    See Kappys excellent note on the rest of “other” files taking up your space:
    What is "Other" and What Can I Do About It?

  • Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    It is a hard one.. laptops with small drives are a pain.
    What you need is a home media server.
    Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
    https://www.apple.com/au/support/homesharing/
    For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

  • I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

    I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
    All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

    Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
    You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
    A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
    Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
    As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
    Hope this helps.

  • Ipod is locked out and it tells me to try again  in 23,204,020 mins how can i bypass this and reset it  i tried hard resting it and it does not work

    ipod is locked out and it tells me to try again in 23,204,020 mins how can i bypass this and reset it tried hard resting it and it does not work

    Read this.

  • I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down and dont work anymo

    I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

    I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels)

    I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels). I don't exactly know how turbo boost 2.0 works either. Or if it'll help.

    Recommended system requirements for Battlefield 3
    OS: Windows 7 64-bit
    Processor: Quad-core Intel or AMD CPU
    RAM: 4GB
    Graphics card: DirectX 11 Nvidia or AMD ATI card, GeForce GTX 460, Radeon Radeon HD 6850
    Graphics card memory: 1 GB
    Hard drive: 15 GB for disc version or 10 GB for digital version
    Minimum requirements for Battlefield 3
    OS: Windows Vista or Windows 7
    Processor: Core 2 Duo @ 2.0GHz
    RAM: 2GB
    Graphic card: DirectX 10 or 11 compatible Nvidia or AMD ATI card.
    Graphics card memory: 512 MB
    Hard drive: 15 GB for disc version or 10 GB for digital version
    You only have 384 MB of GPU Memory....
    Processor class
    Intel Core i5
    Processor model
    Sandy Bridge
    Processor speed
    2300 MHz
    Number of Cores
    2
    Cache size
    3 MB
    Graphics
    Graphics Type
    Integrated
    Integrated Graphics Chipset
    Intel
    Integrated Graphics Chipset Model Number
    3000
    Graphics Memory
    384 MB
    Memory
    Installed memory
    4 GB
    Maximum memory
    8 GB
    Memory technology
    DDR3
    Memory Speed
    1333 MHz
    I don't think your mac can handle it... but like the dude above you said... trial and error is usually the best way to find out. Hope this helps!

  • I have original cs3 master collection but scratched. i need to install it on my macbook pro (mavericks). Adobe download links don't work. I have original serial number. what should i do? i paid a lot for the package.

    I have original cs3 master collection but scratched. i need to install it on my macbook pro (mavericks). Adobe download links don't work. I have original serial number. what should i do? i paid a lot for the package.

    Downloads available:
    Suite:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have a macbook pro with a mini display port out and would like to know how to connect the video from my mac to a TV with old RCA input video, or a TV with S-video imput. How can I do this, and do I need a video converter?

    I have a MacBook Pro that I want to hook up the Mini Display Port video out to a TV with RCA video imput, or a TV with S-video iimput.
    How do I do this, and do I need a video converter?
    Dennis

    there's an adaptor for mini dvi to s-video
    a well known auction site would yield results if apple don't stock it

  • I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

    I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button.  Worked fine before Lion update.   Any Advice?

    Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
    Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
    The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
    I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine. 
    Had heard something about this happening w/ Lion but went ahead anyway. 
    Oh well...
    Hoping your pointer helps... will let you know how it turns out.  Thanks very much for responding!!!

  • HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

    Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

    Hello:
    I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue).  There is no sense in you wasting your time trying to troubleshoot things on a new computer.
    Barry

  • HT4689 My daughters Macbook Pro memory appears to be full.  When she puts it on it only stays on the "purple" screen how can I get on it to create memory?

    My daughters Macbook Pro memory appears to be full.  When she switches it on it stays on the "purple" screen.  How do I get to go further to clear some memory?
    Thanks
    Marlene

    Try these tips.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
        http://support.apple.com/kb/PH10677
    3. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    4. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836

  • HT4363 my macbook pro has 10.5.8 -can't update to 10.6-which is snow leopard i guess?? anyway of doing this without spending more money..just bought apple tv , got 2 ipads and 2 iphones?? an old mac book pro is stopping my ability to homeshare

    I just bought apple tv......trying to use homeshare-computer won't cooperate.....have 2 i pads, 2 iphones and can not get my macbook pro-(10.5.8) to update to snow leopard (10.6) which is what seems will make homesharing work between all these apple products. It looks like I have to buy some software to update the computer. Anyone else have this issue or suggestions or even know what I am talking about?? try to update software to snow leopard and it won't allow me to...this is an old macbook pro  but I paid almost $3000 for this computer a long time ago...find it hard to believe that I can't update without spending a million dollars??? thanks.  Mary

    Welcome to the Apple community.
    I'm not entirely sure I follow you here, home sharing comes with iTunes 10.2, so far as I am aware even iTunes 10.6.1 only requires OS X 10.5.8 or better. On that basis I'm not sure why you think you have a problem.

  • How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver. I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. thanks

    How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver? I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. There are 4 HDMI-in ports on the receiver - BD, DVD, DVR/BDR and audio. In my system preferences for sound, the receiver doesn't show up as an output option. Can anyone please advise. (ps, this is my first time posting a question, so I hope I can find your answers!) thanks, JP downunder

    For sound, try the audio output port and connecting to the RCA  audio input ports on your Pioneer receiver.  Use something like this:
    http://eshop.macsales.com/item/OWC/PODCONNECTOR/
    Ciao.

Maybe you are looking for