My MacBook Pro has developed a rattle?!
All of a sudden, my MacBook Pro has devoloped a rattle - sounds like a fan, hitting internal wiring, or something...
Call Apple Support?
Try running the Apple Hardware Tests from the Installation DVD 1 when your MBP is cool. part of the test involces raping up the fans individually so you should be able to tell then. By the way, do not run the extrended tests as this will heat up your system such that the fans actuate during the RAM tests (the first test to be done) which is what you want to avoid.
Similar Messages
-
My Mid 1020 MacBook Pro has developed a number of problems
First a number of keys stopped working (a, q, 1, and backspace). at that time the caps lock light stopped illuminating. The caps lock has now come back on. but now when my computer boots up it asks me whether I want to boot to the HD or the 1.8 restore disk. I've tried resetting the PRAM etc etc, and have reinstalled 10.8.2.
The keyboard now types ∑´®†¥ (qwerty) instead of the normal characters.
Can anyone suggest what might be going on?Either your alt/option key is physically stuck or the contacts below it are damaged or shorted by spilled liquid.
Given the other keys playing up, I'd be suspicious of the spill.
Another possibility is a swollen battery putting pressure on the underside of the keyboard.
In any case, I'd recommend getting it to an Authorised Apple repair shop for investigation. Diagnosing such faults via crystal ball seldom seems to work… -
Macbook Pro has adware. Keep getting annoying pop-ups. How do i clean my laptop
Macbook Pro has adware. Keep getting annoying pop-ups. How do I clean my laptop
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful. The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
Julz11 in NYCI have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.
-
I think that my Macbook Pro has been hacked. What do I do/Who do I talk to?
I think that my Macbook Pro has been hacked. What do I do/Who do I talk to?
clemons wrote:
My gmail and yahoo email accounts show activity from Iowa. My gmail inbox had a facebook account that I never created linked to it. My yahoo account always says that my location is in Iowa.
I take it you have, nor have never had, any connections with Iowa?
To start, I would change passwords on all your accounts. -
My mid 2010 MacBook Pro has the maximum 8 GB memory cards installed. Can it be upgraded to 16 GB? Are there compatible 8 GB cards available?
I have a similar question.. 13" macbook pro, mid 2010- having problems with spinning beach ball.. like someone from Mars has taken over the computer.. - the specs are below.. would it help if I added more RAM? If yes, any suggestions where/ what to buy? This only started after upgrade to Mountain Lion from SNL.
MacBook Pro 13 inch mid 2010
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory 4 GB 1067 MHz DDR3
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B0E
SMC Version (system): 1.62f7
Graphics NVIDIA GeForce 320M 256 MB
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x484D54313235533654465238432D47372020
Serial Number: 0x27A0B2F9
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x484D54313235533654465238432D47372020
Serial Number: 0x2740B300 -
my new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?
Turn off Find My iPhone in iCloud on the iDevice.
Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
Use Settings > Reset > Erase All Content and Settings.
Then set it up as a new iPhone with your own Apple ID. -
My Macbook Pro has become slow
10.6.7
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Recently my Macbook Pro has become sort of lagging. The lagging is sort of intermittent, but is possibly becoming more frequent. Sometimes when I type, it takes a while to catch up and gives me the rainbow wheel mouse while this happens. I have been getting the rainbow wheel thing a lot lately due to lagging in typing or clicking a link and it takes (seemingly) forever to load (based on how fast it used to be). Sometimes when I scroll using the trackpad (my main method of scrolling), it takes a while to actually scroll. When I open a new tab, what should be my top sites sometimes is a distorted/pixelated picture of black or black and white or whatever was on the screen previously. I am also having a lot of flash problems: I'll be using the internet and then randomly the flash will just close and I'll get an apple pop-up saying that my flash program unexpectedly closed and I should send a report to apple. I refresh the page and the flash is working fine, but the closing will still randomly happen. I use my macbook pro mainly for internet use and microsoft office use since I am a student. This only started recently and I haven't used any microsoft office products since before this started so I have really just been using Safari (it's been a while since I've used firefox also). Therefore, I don't believe an application is causing this. As I am typing this, I ran a software update and found that 10.6.8 is available. I think I will hold off until I get a few responses on this discussion. This computer is JUST over three years (my extended warranty just ran out... of course).
Thank you for reading my post. I greatly appreciate any help I can receive.
SamRun ALL of the free OnyX maintainence and cleaning aspects and reboot.
Run OnyX > Verify > Preferences and write down any corrupt ones, move them to your trash and reboot
http://www.titanium.free.fr/
Check the status of your browser plug-ins here and update.
https://www.mozilla.com/en-US/plugincheck/
Use Firefox, it's faster and more secure browser with tons of great add-ons.
Use the free LibreOffice, it will read all your OfficeMac files, is better written than Microsoft's buggy stuff, more secure too. -
MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
EdI have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?
My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
[System] com.hp.devicemonitor.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
AdobeResourceSynchronizer
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
Adblock Plus: Version: 1.7.4.1135
Ebay Shopping Assistant: Version: 1.1
Amazon Shopping Assistant: Version: 1.1
Slick Savings: Version: 1.0
Searchme: Version: 1.3
AdBlock: Version: 2.6.18
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
29% Safari
16% com.apple.WebKit.WebContent
5% PluginProcess
4% WindowServer
3% com.apple.WebKit.Networking
Top Processes by Memory:
289 MB Safari
131 MB com.apple.IconServicesAgent
82 MB com.apple.WebKit.WebContent
82 MB mds_stores
66 MB Finder
Virtual Memory Information:
721 MB Free RAM
1.62 GB Active RAM
1.05 GB Inactive RAM
636 MB Wired RAM
1.18 GB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My MacBook Pro has 10.5.8 but came with 10.5.7 install disc and won't boot up and can't reinstall
My MacBook Pro has 10.5.8 but came with 10.5.7 install disc and won't boot up and can't reinstall.
the disc is spinning and I see the apple on the screen with the spinning gear and after a while it just turns off OR the few times it does get past that point when I go into disc utility it tells me that it can not install on this machine!
It's driving me crazy, please help!!!Welcome to the Apple community.
I'm not entirely sure I follow you here, home sharing comes with iTunes 10.2, so far as I am aware even iTunes 10.6.1 only requires OS X 10.5.8 or better. On that basis I'm not sure why you think you have a problem. -
My MacBook Pro has slowed to a crawl. It started when I was printing off the internet. Now I get a "spinning ball" with many actions. Any help?
Try your fellow MacBook Pro owners forum -
MacBook Pro
Support:
http://www.apple.com/support/macbookpro
Latest (manual) downloads from Apple (but check vendor sites also for scanners, printers etc) and rule out a bad cable as well.
Apple Downloads -
ICal on my MacBook Pro has been "updating" for days...??
I have an iMac, MacBook Pro, iPad and iPhone. I have been using iCloud since it came out (running Lion). iCal on my MacBook Pro has been "updating" for several days. Also - when I add an event on the MacBook, it does not show up on any of my other devices (they are all set up with the same iCloud calendars). When I add events from my other devices, they DO show up in iCal on my Macbook Pro.
I am at a loss -- any help would be VERY much appreciated!
Thanks
KimHello
Chance upon your post and yes, immediately after upgarding to Mountain Lion, my "new" Calendar (Desktop, formely known as 'iCal') keeps having the pop up window saying "Updating Calendar..." (I set my Calendar to auto-launch after Startup)
After restarting it will still be the same, but if I quit and launch again, everything will be fine. Will try the method you posted (the thread) tonight. Although I deleted the iCal preferences, thinking/hoping it will help
However, I don't seem to have a problem with sycning of al events, my sync with iCloud and all my macs and iOS devices seem OK.
If events are not syncing into some of your iOS devices, why don't you try deleting the entire iCloud account on it and re-set a new one? I've done that before when events or other data don't properly sync
Cheers -
My Macbook pro has the message on a black screen need the reboot disc then press any key to continue. Any Ideas, because I have no discs.I am running Lion OS
Was this a dark gray screen that appeared with the message to restart the computer in five different languages? If so that's a kernel panic. It would help if you can post the panic log: Mac OS X- How to log a kernel panic. Also visit The XLab FAQs and read the FAQ on diagnosing kernel panics.
-
My MacBook Pro has been incredibly slow and laggy
So my MacBook Pro has been pretty much inoperable for a couple of months. The computer crashed and afterwards it would constantly lag. I did a fresh install thinking it would solve the problem, but it did not do anything. I took the computer to the Genius Bar, and they claimed that it was because I was running too many apps and that the computer was slowing down (doesnt make too much sense considering its a mid 2012 and on a fresh install) and then promptly sent me home. When you flash the memory in the beginning, sometimes it will be less laggy for a second, but then start lagging a couple minutes after computer use (this is still on a virtually clean install). I took their suggestion and added a SDD thinking it might help. Nope. So the hardware tests/diagnostics are all normal and I have no idea whats going on. It literally took me 10-15 minutes to run the EtreCheck and copy into mail so I could post these results from another computer. I will love anyone forever if they could explain to me how to fix this.
EtreCheck version: 1.9.15 (52)
Report generated September 17, 2014 1:44:57 AM EDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.8.5 (12F45) - Uptime: 0 days 0:14:30
Disk Information: ?
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 499.25 GB (479.83 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.bombich.ccc.plist Support
User Login Items: ?
None
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
Safari Extensions: ?
Adblock Plus
Audio Plug-ins: ?
AirPlay: Version: 1.7 - SDK 10.8
iSightAudio: Version: 7.7.1 - SDK 10.8
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% WindowServer
1% Activity Monitor
0% activitymonitord
0% blued
Top Processes by Memory: ?
57 MB mds
37 MB Dock
33 MB WindowServer
25 MB ocspd
20 MB SystemUIServer
Virtual Memory Information: ?
1.91 GB Free RAM
578 MB Active RAM
401 MB Inactive RAM
1.13 GB Wired RAM
194 MB Page-ins
0 B Page-outsI don't see anything significant.
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.
Maybe you are looking for
-
Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access
Hi there, I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you. Outlook Web App - What do I need to configure in or
-
Hello, I have a problem related to M-to-N mapping. I have these 2 tables: Category (id) and CategoryRelation (parent_id, child_id). parent_id and child_id are foreign keys to Category.id PK. The problem is that I want to realize a 1-to-M relation wit
-
How to sign with Flash Builder created APK for the Goole Play Store?
Hello, i have big problems signing the apk for the GooglePlayStore.. I tried this from the android dev page jarsigner -verbose -sigalg MD5withRSA -digestalg SHA1 -keystore my-release-key.keystore my_application.apk alias_name but i am getting this er
-
Hi, All I docs of one reciever stayd wit error : Class type xxx, receiving system xxxxxx: no list maintained Message no. B1 023 Procedure Maintain lists for this recipient system in the IMG or deactivate the recipient determina
-
Alright this was super dumb of me but I was trying to only uninstall one visualizer I downloaded before, and I sort of ended up uninstalling the Lathe, Stix, and Jelly visualizers as well oops So I was wondering if anyone knows where I can get the pl