My MacBook Pro instantly logs me out after logging in
Every time I log on to my Mac Book Pro 10.6.8 the desktop loads and then instantly logs me out and returns to the log in screen. I am able to log on in safe mode, but can't figure out what's wrong.
I've reset the PRAM and SMC, repaired all permissions on the Disk Utility, booted it in single user mode to check the /sbin/fsck -fy and the /sbin/mount - uw / rm /var /audit/current commands, but nothing has changed.
The day before this happened my Mac suddenly started to only type in caps and load in safe mode, I figured it must be a stuck Shift key, so cleaned it, but when that didn't work I downloaded KeyRemap4MacBook. I then used this to disable the left and right Shift key. For a while after it appeared that only some of the keyboard reverted back to normal and the rest remained in Shift mode, but then the next day the keyboard completely returned to normal. That is when the log in issues began. The Shift keys also still appear to function, which I didn't expect after disabling them.
I am not techno savvy, so any advice would be much appreciated.
Thanks
Yep! It's' a known problem I'm afraid, very common indeed with that card. Nothing that can be done AFAIK.
I would be getting my soldering iron out if I were you
Similar Messages
-
I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.
I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation. I will post my computer's 'specs' below. I installed Lion, from Snow Leopard, through the App store. The first week, it worked like a dream, and was loving my brand new computer, or so it seemed. I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2.
The freezes are sporatic at best, and cannot be narrowed down to one app. I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there. That fixed the problem. For about three or four days. From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument). My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out. That would not be good for me, as I am a High School student, who works online.
So I then decided to go to the Apple store, see what they said. They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board. This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone.
So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion. Figuring maybe my data was corrupted during install. This helped for a day or two, and happened again. So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install. I got my computer back last night. Now, I am not saying that didn't help. Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself). I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours. Which, let's be honest is still a lot.
So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas? Or guarenteed fixes? I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people. Thank you to those who read through my whole spiel, and thank you to those who will help me!
[Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome. Especially DIY fixes. (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
Macbook Pro
15-inch, 2.53GHz, Mid 2009
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Graphics: NVIDIA GeForce 9400M 256 MB
Software: Mac OS X Lion 10.7.2 (11C74)Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.
-
I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.
First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!
MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabassI have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this? -
My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?
My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
[System] com.hp.devicemonitor.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
AdobeResourceSynchronizer
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
Adblock Plus: Version: 1.7.4.1135
Ebay Shopping Assistant: Version: 1.1
Amazon Shopping Assistant: Version: 1.1
Slick Savings: Version: 1.0
Searchme: Version: 1.3
AdBlock: Version: 2.6.18
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
29% Safari
16% com.apple.WebKit.WebContent
5% PluginProcess
4% WindowServer
3% com.apple.WebKit.Networking
Top Processes by Memory:
289 MB Safari
131 MB com.apple.IconServicesAgent
82 MB com.apple.WebKit.WebContent
82 MB mds_stores
66 MB Finder
Virtual Memory Information:
721 MB Free RAM
1.62 GB Active RAM
1.05 GB Inactive RAM
636 MB Wired RAM
1.18 GB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My MacBook Pro is running very slow after update to Yosemite
My Macbook pro is running extremely slow after updating to Yosemite. What can I do to solve this problem?
EtreCheck version: 2.1.1 (104)
Report generated 8. dec. 2014 kl. 20.05.45 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 4:2:9
Disk Information: ℹ️
Hitachi HTS545025B9SA02 disk0 : (250,06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.20 GB (195.10 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist [Support]
User Launch Agents: ℹ️
[running] com.spotify.webhelper.plist [Support]
[invalid?] com.zeobit.MacKeeper.Helper.plist [Support]
User Login Items: ℹ️
iTunesHelper Program (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Program (/Applications/Dropbox.app)
Spotify Program (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 [Support]
ViewRightWebPlayer: Version: 2.3.0.4 [Support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions: ℹ️
Extensions: No such file or directory
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
13% mds
11% WindowServer
0% fontd
0% AppleSpell
0% Dropbox
Top Processes by Memory: ℹ️
228 MB com.apple.WebKit.WebContent
193 MB Safari
112 MB softwareupdated
107 MB Microsoft Word
94 MB Preview
Virtual Memory Information: ℹ️
617 MB Free RAM
1.82 GB Active RAM
869 MB Inactive RAM
724 MB Wired RAM
2.67 GB Page-ins
74 KB Page-outs
Diagnostics Information: ℹ️
Dec 8, 2014, 04:04:13 PM Self test - passed -
My MacBook Pro will not start up after entering correct password.
My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.
Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz -
MacBook pro fails to wake up after opening the lid
My MacBook pro screen lights up briefly after opening the lid from a sleeping status. However the screen then turns off and the only remedy is to force a shutdown by holding down the on/off button and then restarting it.
My "nearest" local Apple Store is almost 40 km far from where I live...It's clearly a softwere problem and yes, It's not new for Apple. I hope they consider this annoying problem and fix it as soon as possible. I also noticed that doing a "Verify Disk" via Disk Utility an error accours by checking the free space of the HDD. It's suggested to repair the disk immediatly (bold red alarm pops out ) rebooting the system and using the tools under the CMD-R startup. By the way, ignoring the problem and by just verify the disk again, the error maigcally disapper into the void...that's weird !
I hope somethings will come out, I'm really, really annoyed by this problem and i don't want to run in some data loss or HDD failure because i really need my Mac for work (as, i think, most of us )!
Claudio -
dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps connot be installed on this computer!!!!!
what should i do
this problem started to annoy me, as am not able to edit any photo.
pls help ASAPThanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help -
Windows 8.1 automatically logs me out after one minute
I downloaded and installed Windows 8.1 Pro a few days ago from TechNet. I'm logged in only with my Microsoft account (not a Domain account).
For some reason, it logs me out automatically after one minute and takes me back to the login screen where I have to click and enter my password in. I checked all of the Power settings and the Screen Saver is off.
Also, I've wanted to disable the login screen entirely since I live alone. I've seen many articles about being able to disable it by unchecking the box in the netplwiz app, but the option doesn't even exist.
Thanks in advance!Hi,
May be you can try to boot into safe mode for test, or create a new account.
In addition, netplwiz is a command to open Manage User Accounts. I doubt whether you had use it correctly.
Press WIN+R, then type netplwiz , press
Enter.
Roger Lu
TechNet Community Support
I booted into Safe Mode (after figuring out the new method) and it logged me out after one minute. I logged back in, created a new user, rebooted in normal mode, logged in as new user, was logged out after one minute. Double-checked Advanced
Power settings again -- nothing indicating this should be happening. -
My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?
OK, some more info.
I have re-installed os/x and applied all of the updates.
I have tried to migrate my existing accounts and the problem consistently manifests as below:
1. In a new user account, I can log in and use the keyboard then logout
2. If I log in to the migrated user account, the non-numeric keys on the keyboard do not work. If I then log out, and try to log in to another account on the same machine, the non-numeric keys continue not to work.
This would seem to suggest that as the profiles being migrated are on a machine with the same version of up to date OS/X, the issue lies with either the Macbook Pro (other people have also had keyboard problems) or with the migration assistant not working properly given that the current profiles work fine on another mac.
Any more ideas anyone? -
My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.
Start up in Safe Mode.
http://support.apple.com/kb/ph14204
Repair Disk Section: "Try Disk Utility"
http://support.apple.com/en-us/HT203176 -
My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?
I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good... -
I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?
Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3 -
New Retina MacBook Pro does not find WiFi after booting
My Retina MacBook Pro keeps looking for WiFis after it has booted, but does not find any.
I have to explicitly turn WiFi off and on again after booting to get it working.
When I put the MacBook to sleep and wake it, the problem does not occur.
Any hints what could be the problem?Not sure if this will help, but you can go into System Preferences > Network and, if you haven't already, create a new location (mine is called "home"), then from this location remove all connection methods from the left column except Wi-Fi. Also, click on "Advanced" and remove anything from the Preferred Networks list that you aren't using. Then click on "OK" and "Apply".
Maybe you are looking for
-
Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground. No Genius bar appointments available for a week!
-
I have gone through the clean install process for Flash player on Mac OS X (10.9.5) a few times, it is still failing. Any help figuring this out would be greatly appreciated. Here is the log: 2014-11-28 15:46:04 -0600 [I] IM: ---------- log start --
-
Accessing EJBs from a Web project
Hi, I am getting the error: "com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/env/ejb/UserInfoServer." when I try to access the session bean from
-
Actvities before the Project Start Date
Every now & then, we will get an activity which is a precursor to a project kicking off as a project start date so in theory from that start date would be known as either week 1 or Month 1. So in this case, any actvivity starting a month for example
-
Firmware corrupt ready 2 download Fatal Error 7
Hello Guys, the issue is with the Laserjet 1536dnf MFP I can't recover it at all it's stuck in Firmware corrupt ready 2 download I have done step by step whatever was here : http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03109721 I