My Macbook pro is frozen during start up. It is saying "panic" "kernel"

I was updating my Macbok pro and while restarting it, it froze on the gray screen with the white apple in the middle with a whole bunch of gumbled mess of letters and words. I can not use it, all it alows me to do is power off and on. But when it powers on, it goes straight to the gray screen again. HELP

Hi Lexi,
Gray screen at startup: http://support.apple.com/kb/TS2570
Kernel panics:
http://support.apple.com/kb/TS3742
http://www.thexlab.com/faqs/kernelpanics.html

Similar Messages

  • Failed attempt to restart after updates, MacBook Pro now frozen on start up.

    Hi, please forgive my ignorant description, I am useless outside of emails and documents.
    This morning I clicked yes to update my MacBook Pro. I think it was on mountain lion and had an upgrade bundle. During the restart the charger plug was dislodged for a few seconds. It came up with an error message (along the lines of "not all updates successful" and prompted for a restart. I restarted and after the start up sound I am frozen on a white screen that says -
    panic (CPU 0 caller 0 xffffff8028e59241): "Unable to find driver for this platform:\"ApCI\".\n"@/SourceCache/xnu/xnu-2050.20.9/iokit/Kernel/IOPlatformExp ert.cpp:1548
    Further down it says Mac OS version not yet set.
    I tried turning it off and on again and ended up back at the same screen message. Also tried control option escape and nothing happens. I live in regional SE QLD, nearest Apple store is in Brisbane. Is there anything I can do or do I have to wait till I can get it to a professional?
    Thanks.

    Boot into your Recovery partition (if you can) by holding down the command and R keys whilst booting. Once there elect to resinatll the OS (you may need your Apple ID and password for this). You'll not erase any data, etc., by installing a fresh OS.
    Once your OS install is complete, you can restart and go through the update process again, this time remembering not to unplug from mains while the updates are installing.
    Clinton

  • New macbook pro has frozen during windows migration and can,t operate, new macbook pro has frozen during windows migration and can,t operate

    trying to set up new macbook and has frozen during the process of using windows migration, now can,t get it to go

    Try just holding down the power key to power off - you may have some files that migrated, maybe, maybe not.
    You won't hurt anything - just have to try MA again if it doesn't work the first time.
    Clinton

  • MacBook Pro seems frozen during sleep

    I just experienced an odd problem with my 6 month old MBP. I left the computer with the lid open and came back 30 minutes later and screen was black, as if it had gone to sleep. However, the sleep light was not pulsing and the computer would not wake through typing or clicking the trackpad. I tried closing the lid, and the sleep light went on solid, not pulsing. I opened the lid and the sleep light went back off and the computer still would not wake. Finally I just manually turned it off with the power button.
    Has anyone else experienced something similar to this? Any ideas about what might be causing it? I have not recently downloaded any new programs.
    Thanks so much!

    I have a similar problem. MacBook Pro 6,2 sleeps and wakes perfectly if I close the lid or manually select sleep from the Apple menu. If it sleeps from the Energy Saver preferences, however, it takes from 4 to 20 minutes for the indicator light to start pulsating. When I attempt to wake, I will get either a freeze or lock-up (spinning beach ball, or missing cursor and inability to do anything by trackpad, mouse or keystroke) or I will get a black screen. At this point, if I close the lid, the indicator light goes on steady. I have to shut down/restart using the power button. I got this computer in December 2010. I can't state with certainty that the computer has had this issue since day one -- I didn't notice the problem until I had let the computer sleep on its own, which was about two weeks after I first started using it. The only mod I have is the SSD drive I replaced the original HDD with, which I did before I even powered on the computer for the first time.
    I worked with an Apple engineer for several hours (via phone) doing a variety of things such as resetting the SMC, logging in to a new account, booting into safe mode, and a clean re-intall of of OS X 10.6, none of which resolved the issue. I can recreate this freeze after sleep issue 100% of the time if I let the computer go to sleep via the Power Saver and wait several minutes, regardless of whether I am on battery or power adapter, safe boot mode, how many applications I have open, or what peripherals are attached.
    Scott

  • MacBook Pro shuts down during start up

    Recently my macbook pro battery stopped working, i took it to the apple service and battery has to be replaced which they will do so soon. They told me i can still use it on the power cord. However when i started it up the screen has a spinning wheel and a loading bar underneath the apple logo, which it never had before, and when the bar is 1/3 done the computer just shuts down every single time at the exact same place.
    Is this because of the battery being broken or is it a totally different problem?
    Any help would be very much appreciated. 

    Info from this article may be helpful.
    http://support.apple.com/kb/TS3148
    Best.

  • My Macbook Pro turns off during start-up

    About a week ago I started up my mackbook pro and it turned off after about 2 second after the start-up tone... this happened repeatedly. I found by holding down the "ECS" or "SHIFT" on start-up it boots up but then the "Are you sure you want to shut down this computer" window appears repeatedly, even when I click cancel. If I don't click canel within about 2 seconds, the computer turns off anyway.
    I left it for a day or two and then tried starting it up again... it started up fine...??? I updated the OS from Lion to Mavericks as I needed the new version of Keynote.
    Another day or two later... it was tuning itself off again on startup and once booted...???
    Now I am here online trying to find some answers and have reset the PRAM... its still turning off. I left it for about 5 mins while typing this discussion in and it booted OK again and is still running.
    Any suggestions?

    danyog1,
    if it works for you in Safe mode, then that suggests that something that runs at startup in normal mode could be the problem. Download and install EtreCheck, and please open your own discussion and include in your initial post there the output from a run of EtreCheck.

  • New MacBook pro has frozen in start up just apple on screen

    This is a brand new computer and I'm flying and having to figure this out on I phone can anyone help

    So what do I do? Do I switch off the PC and try again? Or will this do some sort of damage since it's the first boot...?

  • My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do

    My MacBook Pro randomly froze during a sync to my iPhone and started making a scratching noise by the power button. I shut it off then turned it back on and it won't take me to the desk tops it will just flash a folder with a question mark in it. What do I do?

    You have a HDD problem (hopefully you have a backup).  Start with the information on this support article:
    https://support.apple.com/kb/TS1440
    Ciao.

  • My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

    My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

    Hello Kierasully,
    I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/ts2570
    Regards,
    -Norm G. 

  • My MacBook Pro has frozen mid restore, I can't even shut down. Please advise.

    My MacBook Pro has frozen mid restore, I can't even shut down. It has been like this for a few days now.  Please help!

    Press and hold down the power button until the system Turns Off. Then try to start it again.
    I suspect you have some type of hardware problem. As you didn't mention why you were doing a restore I suspect it was from a system crash of some type. What caused that crash, if there was one, is the reason the system has now Hung again trying to restore it.

  • Started a similar string before.  When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage.  I know that they are registered.  Is there a problem with Contacts?

    Started a similar string before.  When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage.  I know that they are registered.  Is there a problem with Contacts possibly.  The previous help has been appreciated but the problem persists.

    Hi,
    Try iMessaging your own iPhone and see if your account is actually logged in.
    It can appear "enabled" and On line but sometimes it is not.
    Also try sending from your iPhone (number) to your Apple ID and see if it gets to the Mac.
    If it does not use the Sign Out button.
    Then shut down the Mac
    On restart add back the Apple ID to the iMessages account settings.
    I also just checked My wife's iPhone as she popped up red.
    It turned out her iPhone did not have Messages On.
    10:00 pm      Tuesday; January 28, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I finally was able to download and install mountain lion on my macbook pro. Within minutes, I received an email saying my iCloud account was accessed by my apple id. I unchecked the icloud box during the iTunes setup. Can someone tell me if this is a ha

    After months of failed attempts, I finally got mountain lion loaded on my macbook pro. Shortly thereafter I received an email saying my id had been used to access icloud.  During the setup process, I unchecked the icloud box so I am not sure whether this is normal or has someone else using icloud with my id. I am pretty sure that I did not select iclout  for set up.

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • 13" late 2011 MacBook Pro has frozen after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. Despite the fact that I can boot from the external, could it be the RAM that's the prob

    My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.

    Boot the MBP with the OPTION key down.  If successful, you should see two HDD icons,  Select the recovery partition (on the right).
    From the 4 option menu select Disk Utility.
    Run Disk Utility>First Aid, Verify and Repair.
    If the disk cannot be repaired, it will have to be replaced.
    Ciao.

  • Data transfer from 08 macbook pro that won't start up to new macbook pro?

    i have a 2008 macbook pro which won't start up properly, although, it will will start up with the Ctrl+T command which to my knowledge allows it to become like an external hard drive.
    my question is, which cable will i need to transfer data to my newer macbook pro that only has thunderbolt connections, and what are the limitations to the files i can move over? basically i need all my document files, iTunes files, and garage band files...

    1. You need a FireWire 800 to Thunderbolt adapter.
    2. All of your personal files can be moved over.
    (109991)

  • My is MacBook pro is frozen and I cannot move the mouse and there is lots of batter still left.  Any suggestions?

    My MacBook Pro is frozen and I cannot move the mouse and I have plenty of batter left on computer.  Any idea on how to unfreeze mouse or computer.  Help?

    Press Command + Control + Power button and Force Restart your Macbook Pro if you do not have any Important Work open as this will Turn OFF and Turn ON your Mac and any Unsaved Data will be lost.

Maybe you are looking for

  • Fraud follow up

    I just recently had my account hacked. They used my phone upgrade and ordered an iphone5 and had it over-nighted to Denver. From what the local Verizon store person tells me, they didn't stop FedEx in time and this ******* got this iphone5. Verizon i

  • Rollovers work in iweb - but not online

    I have created a website in iweb with several hyperlinks just by highlighting a line of text and making it a link. The normal,rollover and visited colors work fine in iweb. However, once I go online to see my page the rollover color does not show whe

  • Oracle messenger web interface

    Does Oracle messenger has an interface that can be integrated with a Portal page? Essentially, the need is to have a messenger window always available within a portal/web page instead of invoking the client for sending/receiving messages. If Oracle m

  • Want to learn Webdynpro!!

    Hi All I want to learn SAP NETWEAVER WEBDYNPRO, Please state the steps and links or materials to be followed to learn Webdynpro.waiting for a effective advice. thanks and Rgdsc in advance. Brad

  • Re: NWAdmin32 GroupWise plugins for API gateway

    Hi Tommy- I went to extract that file and received: "*** Verifying ARJ-SECURITY envelope ... *** Damaged ARJ-SECURED archive!" Any possibility you can re-send that file to me or confirm it extracts on your end? Thanks! -Cory skjervem