My macbook pro is stuck on the log in page and is showing a gray folder what do i do ?

my macbook pro is stuck on the log in page and is showing a gray folder where the log in icon should be. what do i do??

Hi jazziejayy,
Thanks for visiting Apple Support Communities.
If you see a gray folder icon and can't log in to the user account on your Mac, start with the troubleshooting steps in this article:
A flashing question mark appears when you start your Mac
http://support.apple.com/kb/ts1440
Regards,
Jeremy

Similar Messages

  • My phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

    my phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...

  • My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • HT201365 I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

    I am trying to update my iphone 4s to ios7. It is stuck on the terms & conditions page and will not move on even if I agree or disagree. Any help?

    this did not help me.  Agree/disagree/turn off/turn on/ try again.  Nothing gets it off the initial Icloud terms and privacy policy agree/disagree page.  The phone is really of limited usefulness, being stuck on that page.

  • My macbook pro is stuck at the white screen at start up...

    my mac is a 2011 13 inch macbook pro.
    i tried holding command+option+p+r and it kept on playing the chime and it was still stuck on a white screen
    please help!!

    Try a Safe Boot: http://support.apple.com/kb/TS2570
    If not use the Recovery:  http://support.apple.com/kb/HT4718

  • My Macbook Pro is stuck on the loading screen

    Hello. My Macbook Pro from late 2012 won't start up normally. It stays stuck on the loading screen with the spinning grey wheel. I reset the PRAM and it did nothing. I did Control-R and trI'd to repair/verify the disk and it said there was nothing wrong. Can anyone help?

    Hi daviscouch,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where your Mac will not boot past the gray screen with spinning gear, please follow the steps in the article below.
    Mac OS X: Gray screen appears during startup
    Cheers,
    Alex H.

  • Macbook pro gets stuck on the startup screen...

    This question is a little odd as i am typing it off of my macbook pro right now, but my macbook fell of my bed and then it froze. I then resarted it and it just sat on the start up screen with an ideling circle under the apple logo along with a loading bar at first. I let it sit for about 25 minutes and then realized that it was going to work.  I then tried to restart it in safe mood and that didnt work and i dont have the disk so i cant boot from that but then i tried this...
    Hold command S on start up and then type
    /sbin/mount -uw /
    and then
    chmod 775 /
    and then
    exit
    After that it booted up and now i am using it as previously stated but my only probelm is turned it off to see if it would come back on no problem and it doesnt i had to go through the same commands over again to get it to work.  So any suggestions on how to get it back to normal?
    Thanks

    Try resetting the Pram
    http://support.apple.com/kb/ht1379
    and Smc
    http://support.apple.com/kb/ht3964

  • My Macbook Pro is stuck at the start up screen

    Last night I was using Safari and it froze so I restarted it but when it started turning back on it didn't completely restart. It just stayed on the first screen.. I heard the start up chime and then it went to the screen with the apple and the little circle that spins while it's loading and it just stayed there... After about ten minutes of it staying on that screen I hit the power button until it turned off, shut the computer and left it alone for about an hour.. I plugged it into the charger and then turned it back on and I heard the chime again and it went to the same screen it had been on before... It was around 1AM and I accidentally fell asleep waiting for it to turn on so it was plugged in and on the loading screen from about 1AM until I woke up at about 10AM so it was stuck on that screen for 9 straight hours.. It's really freaking me out now. I tried to do it again and then I tried to reset it by turning it off and hitting 'SHIFT+CTRL+OPT' and holding the power button.. Nothing happened but I tried to turn it on again and it stayed on the same screen again... I have no idea what is happening and it's freaking me out now... So does anyone know how to fix this? Or even had it happen to them before?
    If it helps I bought the computer in October of 2009.

    Follow these documents.
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/TS1440
    http://support.apple.com/kb/HT1455
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/HT1379
    Try to get into your machine and if you do, the first thing you do is
    backup your files to a external drive. (not TimeMachine) via regular
    drag and drop methods.
    Disconnect this drive. and all others.
    Repair Permissions /Drive from the installer disk
    You can then c boot off the installer disk for your OS version and
    under the Utilities menu is Disk Utility > Repair Disk and
    Repair Permissions.
    Any warnings related to Disk Repair that are not repaired
    is a sign of trouble.
    This one about permissions you can ignore
    http://support.apple.com/kb/TS1448
    Reinstall OS X
    Also you can reinstall just OS X itself while c booted off the
    installer disk, shouldn't effect your programs or files
    (but backup all files just in case)
    Hold off Software updating until your third party software
    has a update to work with the current OS X version.
    OnyX clean and check
    You can download and run ALL the cleaning and maintenance
    aspects of the free OnyX and reboot here:
    http://www.titanium.free.fr/
    Also use OnyX Verify > Preferences (check to show only corrupt)
    plist files, write them down and find them and move them to your
    desktop and reboot, they will be rebuilt. If everything is fine then
    delete the old plists and set your preferences again.
    Most drastic method
    If that don't work, c boot off the installer disk again, this time
    use Disk Utility to Erase >format HFS+ Journaled with Security
    option > Zero All Data (will take some time) This will totally
    wipe the drive of everything and is a last ditch effort.
    When it's done quit, and reinstall OS X.
    You'll have to go through the setup and reinstall your programs
    and files from backup. Secret is use the same user name and
    drive name as the previous time so your iTunes folder will work
    without a hitch.
    If you restore from TimeMachine, it's possible whatever problem
    you had can return, but you can try and if it doesn't work, just
    repeat above without TimeMachine.
    Clone your boot drive
    Later look at free/donationware Carbon Copy Clone your boot
    drive to a external HFS+ Journaled formatted drive (in Disk Utility)
    and keep in a safe place, it hold option bootable, reverse clone
    great if your hard drive bites it, or TimeMachine gets hosed.
    TM isn't bootable.

  • My MacBook Pro is stuck on the loading screen and sounds as if its about the take off?!

    Hi everyone. About 3 hours ago my laptop suddenly became very unresponsive and began freezing a lot. I cleared the cookies on Firefox, but the problem carried on so I tried rebooting. Now it has been stuck on the loading screen for about half an hour, sounding like a rocket ready to take off.. I brought it second hand and I don't have an installation CD, at least if I do it's not here at uni with me anyway.. Any ideas?! Thanks

    Not knowing what your os is very difficult regarding offering troubleshooting solutions.  Most if not all the system discs are machine specific. 
    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available. 
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
    Mac OS X versions (builds) for computers 

  • MacBook pro is stuck on the start screen, MacBook pro is stuck on the start screen

    Just completed a divx upgrade, restarted and the MacBook will not go past the white screen with the apple and the little wheel going around.

    Hold the shift key while booting and uninstall the software you just installed using THEIR uninstaller to catch the at boot time kernel extension file, it's not compatible or requires a update.
    If there is none, then see the first link here to uninstall it manually.
    Step by Step to fix your Mac
    Mac won't boot or "You need to restart"
    Create a data recovery, undelete boot drive

  • TS2570 My 2010 MacBook pro gets stuck at the apple start up screen

    I think I've tried almost everything possible and my computer gets stuck at the apple start up screen with the loading bar under every time I shut the computer down and restart it. I've tried all the resetting, trying to do the apple hardware test (which never worked), and so many other things that I can't even remember everything that I've tried. Could someone out there possibly help me?

    Yes. I turn it on like I normally would. I hear the chime and everything. It looks like it wants to start up and it acts like its loading. Then it just gets stuck when the loading bar gets to right about the middle.

  • Why does my macbook pro gets stuck in the startup screen?? its the older versiom

    its like stuck in the startup screen. i tried a few times and even took out the battery twice. please help!! i have some important document stored inside i cannot retrieve now!!!! 
    i think the operating system is like 10.7.something

    You might have a failing hard drive. If you're running 10.7.x, try booting into your Recovery partition - holding down the Command and R keys whilst booting. Once at the installatio screen, use Disk Utility to verify and, if needed, repair your hard drive. If it can be repaired, you should be good to go - if it can't be repaired then you're going to need to go shopping for a new drive.
    Clinton

  • My MacBook pro is stuck at the gray loading screen. How do I fix it?

    It's only a month old!
    I have tried resetting parameter ram, restarting and holding option to. Load the lion recovery, but nothing seems to work.
    Thanks for any help you can offer. This is very frustrating.

    Resolution
    Note: Some steps below may reset preference settings or registration settings.
    Disconnect, test peripheral devices and network cables
    Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
    Disconnect any Ethernet cables.
    Start up your Mac.
    If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
    Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
    If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
    If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
    Perform a Safe Boot
    Simply performing the Safe Boot may resolve this issue.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
    Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
    If your Mac starts up as expected, immediately try restarting.

  • In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

    In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

    One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
    Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
    Clinton

  • Lync 2013 and Macbook Pro (can not complete the call ) on audio and video call

    hi everyone ,
    we installed lync2013 server on windows 2012 server .Windows client working perfectly without any problems but we have some MacBook pro (maverick) with lync 2011 installed (14.0.8) .Mac clients can log in , make Instant messaging but can not make audio and
    video calls at the moment.When  I had done some logging on lync server , I ifigured out the following error message  which is
    "Start-Line: SIP/2.0 401 Unauthorized"
    TL_INFO(TF_PROTOCOL) [LYNCFE\LYNCFE]15EC.26C8::05/30/2014-13:08:46.224.00000BF4 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265)) [3440658878]
    Trace-Correlation-Id: 3440658878
    Instance-Id: 10DF1
    Direction: outgoing;source="local"
    Peer: 10.45.40.22:54285
    Message-Type: response
    Start-Line: SIP/2.0 401 Unauthorized
    From: <sip:[email protected]>;tag=118c2f6503;epid=1dac663933
    To: <sip:[email protected]>;tag=59BF4D7B62264F8A815140BEC75A72BC
    Call-ID: b50d1d78ea20324eb00dbe3ed316c4b6
    CSeq: 2 INVITE
    Via: SIP/2.0/TLS 10.45.40.22:3540;received=10.45.40.22;ms-received-port=54285;ms-received-cid=243800
    Content-Length: 0
    $$end_record
    any ideas related with this error  ???
    1-I had tried 3 different mac book with 4 different user account
    2-Fresh installed lync 2011 on each MacBook ,

    Hi,
    Please try to clear all preferences for Mac Lync.
    You can do as following steps in the link:
    http://www.unicom.iu.edu/kb.php?docid=bave :
    1.  Quit Lync for Mac.
    2..In your Home folder, open the Library folder. Note that Mac OS X 10.7 and later hides your Library folder. To access it:
           1. Press Command-Shift-g, or from the Go menu, select Go to Folder... .
           2. In the Go to Folder drop-down window, enter ~/Library, and click Go.
    3.  Remove the following files from your Library folder:
              /Users/username/Library/Preferences/com.microsoft.Lync.plist
              /Users/username/Library/Preferences/ByHost/MicrosoftLyncRegistrationDB.xxxx.plist
              /Users/username/Library/Logs/Microsoft-Lync-x.log (This file is present only if you turned on Lync Logging.)
              /Users/username/Library/Logs/Microsoft-Lync.log
    4.  In your Documents folder, remove the following:
              /Users/username/Documents/Microsoft User Data/Microsoft Lync Data
    5.  Optionally, also remove Microsoft Lync History:
              Users/username/Documents/Microsoft User Data/Microsoft Lync History
              Note: This optional step will delete saved conversations. For Mac users, the conversation history is not saved to the Exchange account, but instead is saved locally
    to the Mac.
    6.  Open Keychain Access from the /Applications/Utilities folder:
         1. Delete any keychains on the left that look like the following, where emailaddress is your email address: 
    OC__KeyContainer__emailaddress
         2. In your Login keychain, delete the following, where emailaddress is your email address: 
    emailaddress.cer
    7.  In the /Users/username/Library/Keychains folder, delete all files that look like the following, where emailaddress is your email address: 
    OC__KeyContainer__emailaddress  
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for

  • How to change Image in UDF type general and structure Image

    Hi experts, I have defined an UDF at row level in marketing document. I have added one sales quotation and entered the picture file into the UDF. Now I wish to remove this picture file and replace it with other. But when I double click on the UDF, it

  • How to define Budget on Profit Center level

    Hi All, is it possible to define a budget on profit center level in SBO 2005A SP01. My understanding ist, that a budget can only be defined on account level (if marked as 'relevant for budget). If not possible - any idea/solution how to do it? Thank

  • Premiere pro CC " Replace With After Effect Composition" Cinema DNG AKA CDNG  Issue

    I am trying to right click on a cinema dng file and do a "replace" with After Effects Composition. When doing so it only brings in a single frame rather than the entire adjusted video clip. Does anyone know a solution or workaround? Is Adobe aware of

  • Wsse:InvalidSecurity

    Hi there, I have tried to implement a small PHP script for submitting ideas to xPD 2.0. First phase is successful (idea is submitted and guid retrieved). But when I try to upload an attachent using different webservice I get this error message: wsse:

  • How do you put pictures on imovie 11?

    how do you put pictures in projects on imovie 11?