My macbook pro keeps getting stuck on the grey screen

my macbook pro keeps getting stuck on the grey screen eventually im able to get it into safety mode yet i dont have the disc needed to restore or reboot it what should i do

See Grey Screen
https://support.apple.com/kb/TS2570
https://discussions.apple.com/message/16276201#16276201
You didn't mention your MBP model or OS X version. But the link above should help you.

Similar Messages

  • My macbook pro keeps getting stuck on a black screen with a visible cursor, why is this happening and how do i fix this?

    I have a mid-2009 13" Macbook Pro running OS X 10.9.4 and I've been noticing a problem lately (I think it used to happen before too but not as often as now). My screen will sometimes go black, and my cursor remains visible. It will stay like this, regardless of button mashing or trackpad tapping and clicking. It usually doesn't stay for too long but the other day it was staying like that for a good 5 minutes before switching back to the password-enter screen. It happens sometimes when the computer goes to sleep but sometimes it suddenly happens in the middle of use, stopping whatever I'm doing and locking me out for a few minutes. I want to know why this happens and how to prevent it from happening (or perhaps there just needs to be a patch?). What is particularly strange is that my girlfriend just bought a brand new Macbook Air and she already has the same exact problem as me.

    Blank (lighted, but black) screen with cursor at bootup
    [SOLVED] - Macbook Air Sleep/Wake problem
    Dark screen on start-up can only see curser

  • Mac Pro gets stuck on the grey screen and won't finish booting

    I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit.  I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot  (everything works o.k. there) or starting up from the software disk to perform the repairs.  I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit.  This happens every time I try it.  I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart.  Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out.  Could it be a graphics card issue?   I did notice some funky visual glitches occurring prior to the breakdown.  Any other ideas?

    I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
    Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
    And off load all your data to other drives.

  • My Mac pro will not boot. it gets stuck on the grey screen.

    My Mac pro will not boot. it gets stuck on the grey screen. What can I do?

    Mac OS X: Gray screen appears during startup
    If using 10.7 or later, the Installer/Utilities DVD has been replaced with a special emergency partition on the Hard drive called "Recovery_HD"

  • My 4th gen nano keeps getting stuck on the restart screen

    My 4th gen nan keeps getting stuck on the restart screen, the balnk one with the apple. Any ideas?

          Reset it (hold down menu and center button) or Reset it in itunes. Make sure software is up to date!

  • My Mac won´t load. When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

    When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

    RhysWills1,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • I need help loading up my MacBook pro that's stuck on the loading screen

    mmy macbook pro yosimite os won't load. It is stuck on the grey screen, and the progress bar is stuck at half. Can anyone help me please???

    Hi Mr Dachanga,
    I'm sorry to hear you are having issues with Yosemite on your MacBook Pro. If you are still unable to boot past a grey screen, you may find the troubleshooting steps outlined in the following article helpful:
    Mac OS X: Gray screen appears during startup - Apple Support
    Note: If you get to the portion about using an OS X Install Disk, you would want to use OS X Recovery instead, as outlined here:
    OS X: About OS X Recovery - Apple Support
    Regards,
    - Brenden

  • I tried to eject a cd, didn't work so I turned off the computer and now it keeps getting stuck at the gray screen. How do I fix it?

    Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • 13" MacBook Pro Keeps getting kicked off the Internet

    My 2009 13" Macbook Pro keeps disconnecting from the internet somehow. It happens every once in a while when I'm browsing through the internet.
    Whenever I try clicking to another page, all of a sudden Safari says it cannot connect to the server. At first I was begining to think that the issue was with Safari but I then found out it was also happening with Firefox. The only way that I could connect to the internet again is if I literally close my Macbook and wait a few moments before opening it again. For some reason my laptop is the only one in this house having the issue, my sister's 2011 13" Macbook Pro works just fine and doesn't have this issue. So I know it can't be a problem with the router. Does anyone here have suggestions???
    I am really annoyed with this issue!

    Check that your time and date are current in System Preference and being updated for your location.
    Your likely being dropped by your router as your DHCP lease is expiring because your date and time are off.
    ..WiFi, Internet problems, possible solutions
    Diagnosing network issues
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • Macbook Pro wont start up past the grey screen

    The computer is only four months old, fans sound like they are working, and the screen stays on when the power cord is out. I put in the Mac Os X disk today so that I could reset the admin password and as the computer restart for the program it's been stuck on the grey apple screen. If you have anything I can try and do that would be great

    I had the same issue. I would start up my MacPro Desktop, and nothing happened but for the startup chime and the screen going blank. No Apple, no Beachball, no Nothing. I even tried booting from my DVD, and that would not work. So... it was dead, dead, dead and I could not do a thing about it. I tried all the rubber chicken procedures such as booting with the shift key, disconnecting everything, even the keyboard in the end, and taking out two of my four hard drives, doing all the things that the Mac Tech Support (on the phone) advised me to do.
    Mac Tech support tried their best and booked an appointment for me at the Bondi Genius Bar, and I sat on the stool fully expecting to hear the worst. It turned out that the culprit was a corrupt internal eSATA disk, and when it was removed, the computer started up beautiully and recognised my other system disks.
    Funny, I had removed the disk with Snow Leopard on it, thinking that it was a corrupt System disk, but no, it was another disk which I had fortunately up the night before this happened! I noted that the Mac was taking an inordinately lengthy time to shut down after that, which made me rather nervous about the next start up.
    The defective disk had no system on it, and therefore, I never even thought of taking it out. It seemed to an illogical thing to do at the time, as I did not believe that a disk with no system could cause any problem.
    Now I am sitting at my trusty Mac Pro and it is working Better than Ever, and I replaced the faulty 280GB disk with a Samsung 500GB disk I took out of my slow as a wet week LaCie Big Disk Network Attatched Storage. I re-initiallised this disk and it is now working flawlessly as I have been copying data to the SamSung disk now.
    So, the upshot of all this is, is that nowhere is there any reference to a single disk in a bay that can cause the whole Mac not to start up properly! My advice is to those with that problem, remove your disks out of the bays, one at a time to find out if it is a disk causing the problem.

  • My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

    My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

    Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
    Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
    Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

  • MacBook Pro wont start up passing the grey screen, MacBook Pro wont start up passing the grey screen, MacBook Pro wont start up passing the grey screen

    ; my macbook pro is a 15" . i believe its a 2010 model , i left it on by standby last night . and this morning the internet wasnt working , so then i decided to restart my laptop . and so right now , i start it up . and it gets to the white apple screen when it first load , then all of a sudden it shuts down on me . before it shut down by it self it was on the apple screen , loading and loading . couple of people had said it was the battery but im not sure . i hope theres any help , i appreciated . thanks .

    I found this link.
    http://techtips.salon.com/create-mac-recovery-disc-2797.html
    It explains that you must install Snow Leopard to an external drive or LARGE USB Thumb drive, at least 16GBs in size, and then boot the system from that external media and run disk utilities from there on the internal drive.
    So if you have a LARGE USB thumb drive or a external hard drive you can continue this to see if the internal hard drive has failed. If not you could buy one tomorrow or take the system into a Apple repair center.
    Wishing you the best of luck.

  • My MacBook Pro won't go past the grey screen. It only shows that it's loading and doesn't go any further.

    Okay well, to start off, I got my MacBook from a distant family member who got a new one so they let me have their old one. They got it from a pawn shop so I don't have the disk that we got the OS from but it hasn't had any issues UNTIL NOW. I need to use my laptop for a homework assignment so please help me quickly. Everytime I turn it on it'll just stay on the loading screen, I left it for 4 hours yesterday and it still wouldn't work. I reset the (insert acronym here) thing already, the thing where you press control, option, P, R keys at start up. I really need help because my assignment is on the laptop and it's due tomorrow. Please help. ={ And I'm not entirely sure which OS it's using because I've never really checked.

    Boot from the OS DVD you have for the computer.
    Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    You can reinstall OS X, but the procedure depends on the version of OS X that is installed.

  • TS1367 My MacBook Pro will not go past the grey screen with apple logo in the middle

    How do I fix this issue  is there anything I can do

    Hey there Gonzoeg850,
    It sounds like you are unable to boot your computer to your desktop or log in screen. I do not know if you have tried these steps from the article you have up there, but that is exactly where I would start:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

    my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

Maybe you are looking for

  • Portege M750 and Win8 - metro interface, and touchpad don't work

    For those of you that, as myself, tryed to install windows 8 in a Toshiba Portege M750 and had problems in portrait tablet mode I recommend the following driver it works perfectly: http://cdn.wacom.com/U/drivers/TabletPC/ISD_DualTouch_710-8.zip The p

  • Problem with CALL TRANSACTION  SKIP FIRST SCREEN

    Hi Experts, I am having a functionality where in if i click the hotspot i go the specified transaction..I am able to do that using -- CALL TRANSACTION 'CAA3' AND SKIP FIRST SCREEN Now if i press the back button on the standard transaction i am coming

  • Imac dual monitor

    can i use my second imac as a dual monitor "I have a 27" imac as my main computer. I also have an older 24" imac. Is there a way to use my older imac as a dual monitor, bypassing the computer"

  • ILife06 - Fonts missing

    Bought iLife06 today, I loaded it on my G4 laptop but when I started it, everytime I chose a template, I got a missing fonts message. (I restarted my computer and used verify disk permissions on Disk Utility) But same problem. I loaded it on my old P

  • SAP IDOC import from XI

    I'm trying to import IDOC from SAP, but i'm getting "login failed (authorization insufficient)" error. But i'm able to login into SAP GUI using the same login info. What authorizations/roles i should have on SAP and XI system for IDOC transfers? Than