My Macbook Pro locks up and i must manually restart it when using Itunes

My macbook pro has been locking up for the past month whenever i am using itunes and allow my computer to go "to sleep" on it's own. If i close the lid it doesn't lock up, if i change my setting so my mac doesn't go to sleep, it works fine. Has anyone else had this problem or know how to fix it?

Try resetting your SMC and PRAM.
Resetting the System Management Controller >>
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Similar Messages

My MacBook pro is frozen and I can't restart, even by using the power button or control command

Hi- my MacBook pro froze about an hour ago and I've been unable to reboot it. Any suggestions? I've tried the power button, control + command + restart, erc ad none of them do anything.

Hold down the power button for 6-7 seconds. It will power off, then click the power button to turn on again.
Regards,
Captfred

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

Go to: Apple > Force Quit
and select Mail > Force Ouit.

I have a new MacBook Pro Mid 2012 and it goes into deep sleep when I disconnect if from AC power.

I have a new 13" MacBook Pro mid 2012 and it goes into deep sleep when it is disconnected from AC power. I have to press the power button to wake it up. Is this a known issue or is there something wrong with the MacBook Pro?

There are a few threads about this around. Its a known issue for 2012 non retina users, not sure about Apple. It should not work this way and Apple has not put out an update to fix it yet. Check out these threads for some workarounds. I think I saw if you reinstall and don't update one of the updates you get normal functionality back. Otherwise there are some terminal changes you can make to make it operate mostly normally. I made some changes in terminal.
https://discussions.apple.com/thread/4512384
https://discussions.apple.com/message/20436126#20436126#20436126

I have imported a Digital recording onto my Macbook Pro 10.6 and want to burn it to disc on Itunes but the file has gone to Quicktime. How do I transfer it?

I have imported a digital recording on to my MacBook Pro 10.6. I want to move it to Itunes so that I can burn a CD but although I have created a new playlist, Itunes won't accept the file and instead it has gone to Quicktime and I can't transfer it or burn a CD. I have installed a Flip4Mac Upgrade but still no luck. I have managed to transfer previous files and burn CDs before so am not sure what the problem is.

This file type is not supported by iTunes. I would recommend converting the file (I use convertfiles.com, but there are many choices) to MP3. It then can be added to iTunes.

MacBook keeps locking up and giving message to restart

We recently installed Windows on MacBook and ever since then, it locks up and says to restart MacBook. It won't even let me go in to uninstall the Windows software before it locks up and gives this message. Any suggestions? Thanks

Boot up from the Mac OS X install disk and run repair permissions and repair your disk from Disk Utility.

My MacBook Pro is admittedly old (2009) but suddenly very slow when using LR4

I don't hve the fastest computer, admittedly. But dowloading raw pics cand take ten minutes per picture. I am downloading to an external drive - is that the problem, or do I simply need to get a more modern/ faster computer?
I typically shoot in raw and export jpg versions..
thank you so much to anyone who steps forward to help answer my novcice questions

Thanks Butch, I do have large sized images - in the 28 MP range. And my laptop was 4GB with 256 memory.
To avoid clogging up my hard drive, I was keeping the photos - about 4,000 of them on a separate portable drive, a 1TB MyPassport for Mac drive with - indeed, a USB2. So it sounds like the size of my images and this slow transfer is probably a big part of my problem.
I have just upgraded my macbook pro to a new 15" 8GB with a 256 SSD. And I would like to set up properly. I still would prefer not to have all the photos reside on my hard drive. I also have an iMac with a much larger drive, so I guess I could keep the catalog and the photos on it instead - but I don't like to work in my basement space where the desktop is....thus why I've been using laptop.
Any suggestions would be most welcomed. I also have a rather large inventory of previous photos that are in jpg format to be moved from iPhoto. But that is a question for another day. My immediate challenge is to figure out a workflow that is not too slow but does not eat up my hard drive. Danielle

My 15" macbook pro only occasionally manages to connect to my wifi when using router mac-filtering

Once in a while it manages to connect, but after putting the lid down it's gone again. No problem when router mac-filtering is off. All other units works -
I have a macbook, a 13" macbook pro, 3 iphones, a cpl of toshiba laptops running windows and all of them connect without any problems

No problem when router mac-filtering is off.
Then leave it off. It does nothing to protect you from intrusion.

Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?

Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?
E.g. Dell allows you to plug the laptop into AC power but prevent battery charging.
Note: I do not want to physically remove the battery.
If there isn't an option on Mac OS, is there anything I can download to bypass the battery when I want?

Thanks for linking me! Wow I had no idea the clock speed would be cut so severely! What a bunch of rubbish, as if the AC won't provide enough power!
I guess the only solution to my question would be an app which virtually disconnects the battery but tricks the mac into thinking the battery is still connected. I'm just surprised Apple haven't yet started to build prisons for the government - considering how well they lock up their software and hardware!

I bought a macbook pro from someone and want to clear all of the past persons stuff, how can I do that without a cd? specs macbook pro 8.1 with OS 10.6.6. early 2011 model. please help...

I have a macbook pro i bought from someone and I need to clear all this other persons info, i don't have a the cd by the way so thats the challenge I'm against. its a early 2011 macbook pro 8.1 and it has 10.6.6 snow leopard on it and i would like to get it to mountain lion but didn't know if downloading that would clear the memory as well? any ideas?...

1: Backup any data off the machine. Download the free MacTracker
2: Apple menu > About this Mac > More Info > Macbook Pro 3,1 or like model number, punch it into Mactracker.
3: Find out what OS X version came originally on your machine. how far you can go.
Things to consider before upgrading OS X
4: Inexpensive. $ If < 10.6.3, then order the 10.6.3 disks by calling Apple via phone.
5: More money $$. If > 10.6.2 then call Apple ia phone for the machine specific versions as the 10.6.3 retail version won't work.
6: Follow these links to wipe and install
How do I securely delete data from the machine?
How to erase and install Snow Leopard 10.6
7: Run Software update to get to 10.6.8
8: Check hardware requirements for 10.7 or 10.8 using MacTracker , install more RAM if need be. $$$$.
9: Optional, more $$$. Run AppStore and install 10.8, or call Apple for 10.7 (better stay on 10.6 if 10.7 is the best you can do)
Must follow about using the disks to wipe the machine of previous owners data squirreled all over the thing.
Only thing "free" is the advice.

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
Is there anyway to back up this corrupted drive so I can restore my applications later?

There's an old saying. If you don't have a backup disc, then there must be nothing important to backup. That's just lesson #1. Lesson #2 is to never interrupt a software update. Not a good thing.
OK, I'm sure you know this. It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
You're pretty much in a bad place. My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed). You might be able to see your user folder and some of your apps. I wouldn't even consider copying the library, because who knows what's been corrupted in there.
Good luck.

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I have read that new purchases of macbook pro will get free upgrade to LION OS. When and how do I go about this?

I have read that new purchases of macbook pro will get free upgrade to LION OS. When and how do I go about this?

http://www.apple.com/pr/library/2011/06/06lion.html
The Mac OS X Lion Up-To-Date upgrade is available at no additional charge via the Mac App Store to all customers who purchased a qualifying new Mac system from Apple or an Apple Authorized Reseller on or after June 6, 2011. Users must request their Up-To-Date upgrade within 30 days of purchase of their Mac computer. Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request.
Currently that's the only information available. I suspect more will be posted as we get closer to launch.

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread.

My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
What to do?
Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
Thanks
V

Try this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

My Macbook Pro locks up and i must manually restart it when using Itunes

Similar Messages

Maybe you are looking for