My macbook pro not connet to internet between 9pm-9am

new to apple. have my mac book at oct.2011, after someday at dec.2011, my mac book can't connet to wi-fi between 9pm to 9 am. is anyone know what to do?

Do you have admin control over your computer?
Is it your computer or a schools, etc?
Possible nannyware was installed, cutting you off and recording everything your doing.
Perhaps there is a DNS Service that's blocking your access.
Try typing the numbers
23.1.61.15
into the address bar after 9PM when it's not connecting.
Also there are possible ISP controls/data caps that might be not letting you connect.

Similar Messages

  • Macbook Pro not connecting to internet after closing

    I work from home and also have a toddler running around most days.  I am always working and then due to something happening at home have to close my computer and come back a bit later.  This last week everytime I close my laptop and come back I'll open it up but it won't connect to the internet.  I have to restart it and then it does fine.  I'm now restarting it ALL day.  I have no idea what is causing it or how to fix it.  I usually have some issues when I have a software update but I keep checking and it says I don't have one.  Has anyone else ever experienced this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • Macbook Pro, update to Mavericks - internet sharing unstable (ethenet - WiFi)

    Macbook Pro, update to Mavericks ->internet sharing unstable (ethenet -> WiFi)

    Thanks, indeed there's not a lot there.
    I was thinking that there might be a network reset option on my Snow Leopard Mac Book, like I've had a to do a time or two on my iOS devices that suddenly stop seeing the internet. Since I didn't know what that is, I set up a clean TEST user account. Unfortunately, it doesn't seem to change anything, so perhaps the internet network settings are global. Any ideas how to reset the network settings and clear them out completely?
    Hard to believe that there could be something so different between Mavericks and Snow Leopard as far as common network protocols are concerned that allows one to be plug and play and the other to connect to the network but not see the internet. Could it be the hardware? A 2007 MacBook vs. a 2011 MacBook Pro?

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • Macbook pro Notes won't sync with ipad 2

    I create notes in MacBook Pro Mail Notes program.
    I create notes in iPAD 2 Notes program.
    I plug iPAD into MacBook ,,, it automatically Syncs.
    I go into iTunes ensure, "Other ,,, Sync notes", is checked.
    I also ensure, "Advanced ,,, Notes", is checked.
    I click Sync, all looks fine ,,, but NO Notes sync "transfer" between computers !!!
    I did sync "transfer" an APP, iPages, from MacBook Pro to iPAD 2, ok.
    I thought I could sync "transfer" Notes between MacBook Pro and iPAD 2.
    Am I trying the impossible?
    What am I missing?

    I read in your More Like This
    Here's how to sync your Notes between iPad and Mac
    But ,,, When I Go to System Preferences on your Mac > MobileMe > Sync > and make sure Notes is checked
    "Notes" ,,, is NOT checked ,,, and I CANNOT check it.
    Is this why I cannot SYNC my MacBook Pro "Notes" with my ipad 2???
    How do I fix it???

  • Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    System Preferences > Network > WiFi
    To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
    http://support.apple.com/kb/PH13797

  • I can't turn off my macbook pro not even force quit.it keeps restarting soon after i let go of button

    I can't turn off my macbook pro,not even when I try to force quit.Mid 2009 17 inch all the software up to date.Problem started 3 days ago and mac is slow to load when restarted.Please help

    Hi there nina777s,
    You may want to try resetting the PRAM and SMC on your Mac as an initial troubleshooting step. Take a look at the articles below for more information.
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    -Griff W,

  • Why will macbook pro not go to sleep with Lion OS?

    Why will macbook pro not go to sleep with Lion OS?

    Test after each of the following steps that you haven’t already tried:
    Step 1
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
    Step 2
     ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
    Step 3
     ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
    Check all printers for unfinished jobs. Deal with any you find.
    Step 4
    Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
    Step 5
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
    Step 6
    Boot in safe mode and log in. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 7
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 8
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

  • Macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
    You will have to have all computers authorised with the relevant Apple ID's
    Store  >  Authorise this computer...
    This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
    If both Computers use the same apple id this step is not required.

  • On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me) Thank)

    On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me. Thank)))

    The following link has a Wi-Fi troubleshooting section for personal hotspot that may help: iOS: Troubleshooting Personal Hotspot

  • Macbook pro not working without battery

    my macbook pro not working if i remove the battery
    & if the battery is empty my macbook pro not working before charging

    Try an SMC reset:
    http://support.apple.com/kb/HT1411
    You should not run on AC with the battery removed. The MBP should work that way, but the OS throttles back the CPU so running like that is not recommended.

  • I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    As Tom said the FCS forum is the better place to post the question.
    Here is Apple's best practices doc for installing both on the same system.
    BTW, FCP7 is part of the FCS 3 suite of apps.
    Russ

  • My macbook pro not syncing with my ipod and ipad. What do I do?

    My macbook pro not syncing with my ipod and ipad. What do I do?

    iOS: Device not recognized in iTunes for Mac OS X

  • Time capsule only seems to work with my macbook pro, not vista. (wifi)

    So I received my TC today and set it up. Everything is working perfectly except the new wifi network I created only works with my macbook pro, not my other laptop that has windows vista installed on it. It only works with vista when I take off the password from the network. When it's on, it says something about the settings being invalid for that particular computer. I think it has something to do with the WPA2 encryption.
    Any suggestions?

    Nobody?

Maybe you are looking for

  • Failed import from iPhoto to Aperture - what's the best solution?

    Hello After some years of using iPhoto I recently upgraded to Aperture 3.2.2.  In connection with that and before opening Aperture, I bought a new external hard drive and moved my iPhoto library to it, following Apple's instructions on how to move an

  • Initial Set Up Problem With Included Cable

    As I excitedly unpacked my new ipad yesterday and cut it on I got the connect to itunes alert on the screen which I expected. When I made the connection with the included cable to my laptop and activated itunes nothing happened, itunes never recogniz

  • Ora 12170  tns delai

    dear all , I have a problem connecting my client to a the ORCL database on a small lan in my lab, first i get a timeout ORA-12170, after that i figured out that i am using a firewall , so i deactivated it , so it works fine. my question is how could

  • What happened to the font "Betsy" in elements 7, after updating it's gone.

    what happened to the font "Betsy" in elements 7, after updating it's gone

  • My iphone4s was split apart with no reason

    Need help!! My iphone got spit apart from the backplate to the LCD, Battery is fine, but LCD is broken, back plate too, did not drop it at all. was just charging until after a few hours i found it on my desk broken apart. this is sooo wierd. please a