My macbook pro retina 13 inch is making a weird noise
my macbook pro retina 13 inch is making a weird noise
What are you doing when it makes the sound?
Run this and post the results
EtreCheck
Similar Messages
-
Macbook pro retina 15 inch running Yosemite extremely slow previews/rendering
Hello,
So I got the newest version of Macbook pro retina 15 inch (mid-2014) basic model with 16GB of RAM, updated the OS to Yosemite, got Adobe CC on board, was happy for a second until I tried to edit stuff in After Effects. Preview plays at 13 fps at best when rendering something basic as a shape going from one point to the other. If you add footage it is 7fps or something. Already tried some options that were suggested on other threads like disabling App Nap but so far nothing helped. Please help me out, I'm really getting frustrated because of this.
Also, it takes ages to render final comp form Premiere Pro as well.See this page for resources about making After Effects work faster: http://adobe.ly/eV2zE7
Start here to learn After Effects:
http://adobe.ly/AE_basics -
Macbook Pro Retina 15 inch 2.3 running seriously slow
Macbook Pro Retina 15 inch 2.3 running seriously slow lately, anyone else having this? It's been almost a year since i bought it but i only use it for making music and the internet. Got 70 GB free space just in case. It's an absolute nightmare right now. Anyone else having this, any ideas what i can do? Seriously heating up as well.
The kernel_task is basically the OS kernel, so it will fluctuate depending upon what is accessing it. Do you notice this with any other application you are running? What are you doing when the kernel_task ramps up to 300%? How much RAM is installed, and what do you observe about usage in Activity Monitor?
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs. -
Fan like noise - Macbook Pro Retina 13 inch - late 2013 model
If I open Frontline Commando (game app) my brandnew Mackbook pro make fan like noise. (annoying and scary) Could anyone advice please?
my sys configuration:
Model - Macbook Pro Retina 13 inch - late 2013 model
RAM - 8 GB
Processor - 2.4 GHz intel core i5
OS - OS X 10.9.1Normal during gaming use, fan noise.
A: you notice it more in a quiet room (the typical case) which is normal, all is AOK
B: fuzz and dust has caked onto the blades causing the fan hub to get off balance and make a buzzing sound.
C: fan rotor is going bad and making a whirring or buzz noise (rare).
D: Fan is spinning up due to excess heat from gaming, heavy graphics gaming (typical, all is OK)
A and D are normal
B and C are not. -
Hey guys ı really need your help. I bought macbook pro retina 15 inch 2 weeks ago and it came with installed mavericks of course but ı want to create a recovery disk and to do that ı need to download mavericks installer from app store but when i click to download mavericks from appstore purchased part ı get a message says " Your purchasing process couldnt complete. OS X Mavericks cant be installed to this computer." How can ı solve this problem!??
One way around tis is to borrow a Mac that can run Mavericks and then the download will work. You can use these instructions:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Though they are for Mt. Lion, the same steps will work.
Ciao. -
Hey guys ı really need your help. I bought macbook pro retina 15 inch 2 weeks ago and it came with installed mavericks of course but ı want to create a recovery disk and to do that ı need to download mavericks installer from app store but when i click to download mavericks from appstore purchased part ı get a message says " Your purchasing process couldn't complete. OS X Mavericks cant be installed to this computer." How can ı solve this problem!??
One way around tis is to borrow a Mac that can run Mavericks and then the download will work. You can use these instructions:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Though they are for Mt. Lion, the same steps will work.
Ciao. -
MacBook Pro (Retina, 15-inch, Mid 2014) -- Enable NVIDIA GeForce GT 750M ?
Hi
I got a MacBook Pro (Retina, 15-inch, Mid 2014) running on Yosemite.
I wonder how is possible to enable the NVIDIA GeForce GT 750M card?
I am looking around but I cannot find documentation explaining about how to enable the other video card.
Any tips/help?
ThanksCheck System Preferences>Energy Saver>Graphics Switching.
Ciao. -
MacBook Pro (Retina, 15-inch, Mid 2014)preview messing with PSD file
MacBook Pro (Retina, 15-inch, Mid 2014)
2.5 GHz Intel Core i7
v: 10.10.1
after turning my PSD painting upside down using preview, preview modifies the PSD document and flattens all my layers.
now I lost all my layers in my painting!
Why does preview mess around with PSD documents? Please fix this!Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan -
MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?
Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan -
Folks,
I have exacly same sympton described here on my 5 day old 15 inc macbook pro.
http://support.apple.com/kb/TS5296
MacBook Pro (Retina, 13-inch, Late 2013): Keyboard and Multi-Touch trackpad may become unresponsive
Has anone tried to apply this patch on 15 inc ?
Kind Regards,
NeroshigeThe patch is only for MBP late 2013 13 inch. 15 inch is not able to install this patch
I'm facing this problem intermittently.
When my keyboard & trackpad went unresponsive, I plug in my USB keyboard and the keyboard & trackpad went back normal.
I search the web and somebody highlight it may due to connector to keyboard/trackpad appear to be curled.
Not sure is hardware problem or software bug... -
whats the maximum resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?
I don't know where you found 1920x1080, but that isn't the max. The INTERNAL display can even support more than that.
The maximum resolution is really hardware based, and since Thunderbolt 2 has a Mini displayport connector (Mini Displayport 1.2), the max resolution for Mini Displayport is 4k (3840x2160).
PLEASE NOTE: Not all adapters can support that resolution, most monitors that can run 4k @60Hz have Displayport 1.2 (The most recent revision), Mini Displayport 1.2, and HDMI 2.0. DVI dual link can run 4k, but only 24-30Hz, depending on the monitor.
Hope this helps!! -
MacBook Pro (Retina, 15-inch, Late 2013) LEFT USB PORT DISFUNTION
MacBook Pro (Retina, 15-inch, Late 2013) : Constantly disconnected and reconnected from my iPhone while using the left USB port. Is this a rare accident?
If the iPhone works correctly on the other port, then the fault lies within the MBP. Bring it in for service.
Ciao. -
MacBook Pro (Retina, 13-inch, Early 2013) Storage
Hi all,
I am using MacBook Pro (Retina, 13-inch, Early 2013). Base on its spcification [http://support.apple.com/kb/SP668?viewlocale=en_US], it's configurable to 512GB or 768GB flash storage.
My corrent storage is 256GB, and I want to upgrade it.
Is there one more free slot or it need to be replaced with my old SSD???
Thnanks,You need to replace the flash storage. Note that the MacBook Pro with Retina display comes with flash storage because a SSD doesn't fit on it.
I recommend you to get an external drive and store the files there instead of replacing the flash storage, which is expensive and will void warranty -
Broken screen of MacBook Pro (Retina, 15-inch, Late 2013). Where I can find the part?
I have a broken screen for MacBook Pro (Retina, 15-inch, Late 2013) and I cannot find a replacement. Where I can find the screen? I will install myself. Thanks
Apple does not sell replacement parts, any you find will be third-party knockoffs. Take your Retina to an Apple store genius bar and have the techs tell you what needs to be done. New Retina screens are not cheap, they normally replace the entire lid as a unit.
-
My MacBook Pro (Retina, 13-inch, Early 2013) has lag in windows animations.
My MacBook Pro (Retina, 13-inch, Early 2013) has lag in windows animations, Such as maximize window.
In web browsers (Like Safari and Google Chrome) I have lag in animations such as sliders or scrolling pages.
What's the reason guys?Hardware Information:
MacBook Pro (Retina, 13-inch, Early 2013)
MacBook Pro - model: MacBookPro10,2
1 2.6 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 768 MB
System Software:
OS X 10.8.4 (12E55) - Uptime: 0 days 2:10:40
Disk Information:
APPLE SSD SM256E disk0 : (251 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 250.14 GB (210.48 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.kerio.kext.kvnet (8.0.1)
Problem System Launch Daemons:
Problem System Launch Agents:
[loaded] com.paragon.NTFS.trial.plist
[loaded] com.paragon.NTFS.upd.plist
Launch Daemons:
[loaded] com.github.GitHub.GHInstallCLI.plist
[loaded] com.kerio.kvpncsvc.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
User Launch Agents:
[failed] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.google.keystone.agent.plist
User Login Items:
iTunesHelper
KVpnClientAgent
KVpnClientStatus
Rouzshomar
VMware Fusion Start Menu
3rd Party Preference Panes:
Flash Player
Kerio VPN Client
Paragon NTFS for Mac ® OS X
Internet Plug-ins:
AdobeAAMDetect.plugin
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
SpeedDownload Browser Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
5% coreaudiod
2% WindowServer
1% fontd
1% EtreCheck
1% iTunes
0% SystemUIServer
0% coreservicesd
0% configd
0% hidd
0% App Store
Top Processes by Memory:
238 MB Google Chrome
180 MB WindowServer
164 MB Dock
115 MB mds
90 MB iTunes
82 MB Messages
74 MB App Store
57 MB Finder
41 MB Google Chrome Helper
33 MB loginwindow
Virtual Memory Statistics
4.04 GB Free RAM
1.92 GB Active RAM
284 MB Inactive RAM
1.75 GB Wired RAM
3.93 GB Page-ins
0 B Page-outs
Maybe you are looking for
-
Transfer whole schema between databases
Hi, I have a question on how to move an entire schema between two databases which are of the same version and patchset. I identified the possible methods as follows: 1) Using exp/imp or expdp/impdp, but that's quite slow on larger schemas and the tra
-
I use mbp late 2010 (MacBook Pro (15-inch, Mid 2010) Serial Number: W802627ZAGZ) (core i7 2.66GHz. 15" 4GB 1067 MHz DDR3) and change display to highres (1920x1080) it has problem that the screen go blank (or black screen) but keyboard still light. se
-
Assignment of WAVEs to Buckets WCCPv2
All, Can anyone explain how WAVEs (caches in WCCP lexicon) are assigned to buckets please? The context to my question is probably best illustrated by an example: * You have two CEs (CE-A and CE-B), each with a provider circuit * Asymmetric routing ac
-
Printing to a full legal-sized page booklet
I have created a legal-size document that I'm trying to print to the full of the page. However, there is about an 1/8th of an inch or more around the perimeter that won't allow me to print on. Is it possible I am missing some settings in In-Design th
-
Hi, Basically, I receive a hash of a pk and would like to compare that hash value a pk in SQL Server. There is no stored hash value in that table. So I have to use CF function Compare to compare while looping the whole table. As a result, it's sl