My macbook pro Retina has got a burn-in issue.

My macbook pro Retina has got a burn-in issue. The device is out of warranty. I reset PRAM but it didn't help.

As per with any computer, a very basic rule of thumb... The more ram. The higher processor speed... The faster and more efficient your machine will be.  And since processor upgrades are relatively difficult to do if you're not familiar with the hardware... Then I'd go with a ram upgrade (ie getting more assuming you're not already maxed out)
But shy of any of that, just clean up.  Any photo albums, videos, documents you dont need or use anymore.. back them up ten delete them.  The same thing with extra apps or programs.  Think of it his way, the heavier your backpack gets, the slower you're going to walk.  Lighten the backpack, the easier and faster you can walk.  So start by cleaning house.  (personally I'm a big fn of or matting and re-installing everything every now and again.  It may be overkill, but it's one of the best ways to clean.
Start with the free and easy.  If you don't get results that you like then go on to some options that have a price tag

Similar Messages

  • The screen on my MacBook Pro Retina has horizontal lines and has a brightness flicker every few seconds since june 2013 upgrade of airport utility.

    The screen on my MacBook Pro Retina has horizontal lines and a flicker every few seconds this happened after  this weeks Airport Utility 6.3 upgrade.

    Hi John,
    I would take your machine into a Apple service center. Its highly likely a hardware issue. The most likely issue being the display has failed. If there is no external damage to the machines display they will replace the whole display under warranty for you.

  • New Macbook Pro Retina has capacity of 120.47GB??

    Hi all,
    I got a new Macbook Pro Retina 2 weeks ago and after tirelessly trying to migrate everything from my old MBP, I have just realised the new MBP says I have a capacity of 120.47 GB with 101.31 GB available.
    I am in no means tech savvy but this doesn't sound correct when I purchase a 4GB Macbook Pro??
    Can anyone assist?
    Cheers

    The 4GB is the RAM operating memory that your computer has. That's for programs that are currently running. The 120GB is storage space. That's where everything is kept until you start using it. You load from the storage space into the RAM memory.
    You'd have to look through all your stuff to see what you can delete that's not important to you. You might want to do it the other way, which is to reinstall the applications that you want and just selectively move over documents and stuff.
    How long have you had the new Mac? It sounds like maybe you should've gotten one with more storage space. You can return it within 14 days of purchase.

  • MacBook Pro (Retina) has S/PDIF Mini-TOSLINK? Audio Input? Boot as FireWire Drive?

    I love all the Apple MacBooks and I fall in love with the new MacBook Pro (Retina) but then I review all the specs and I feel that some things are missing:
    It has S/PDIF Mini-TOSLINK? I use this a lot!
    It hast Audio Line-In input?
    I only see output and somebody told me that the same port could do both, but what abaout using the MacBook with Guitar Rig? I need both, input and output!
    Sometimes you need to boot the MacBook as FireWire target disk mode, the new MacBook doesn't have any FireWire port, you can plug a Thunderbolt to FireWire adaptor, It could work? how can I boot the mac as target disk mode?
    The last thing that was missing is the optical drive but that is another story!
    Thanks for your answers!

    well, like Point - counter point (for those old enough to remember it) let me give you my 0.02 cents worth
    YES, it is SO worth it.  The big expense is the 512G flash SSD.  Besides being more shock resistant, not subject to fragmentation, its blankty blankaty FAST!  So many programs load twice as fast.  (I am running windows in Parallels, a huge diff. in start up speed).  Video editing SO much faster.   That is a huge part of the cost.  The rest is the lovely screen.  When I picked mine up yesterday (Tuesday) opened it in the apple store, put it next to the current 15" MBP and there is a noticeable improvement including less glare. 
    One feature that is not mentioned, while the screen is 2880 x 1800 you get 5 different display resolutions that all are very sharp.  For OLD eyes, you can go down to 1024 x 640 (OK, WAY TOO BIG) and when I am writing code, I want a lot of space, so bring it up to 1920 x 1200.  The default is in the middle.  Most other LCD screens have one "GOOD" resolution.  To me, this is a HUGE feature!
    The speakers are MUCH better than the ones on my previos MBP. and the fan is MUCH quieter (I play Second Life a lot and that heats up the computer so the fans are always at max!)  Oh yea, the video card is noticably faster with Second Life.  I am getting twice the FPS. 
    I am very happy with the jacks.  Yes, if you need wired ethernet each day, it would be nice to have that built in, I guess ditto for video out, etc. but I dont mind buying the adapters when I need them (Yo Apple, I am waiting!).  Ditto with the external DVD Drive.  If I was living on an airplane and wanting to watch movies on each flight, thish would NOT be the laptop for me, but I figure I use a DVD maybe once every other month or so. (and since I have more than one mac, the remote DVD option works fine with me.  Worked fine for years with the mac air!)
    Bottom line, this very expensive computer seems very polished to me.  If I was just not so impatient to wait 2-3 weeks to order one, I would have an extra 256G storage and 16G of ram!  But I guess I can settle for this "entry Level" machine
    bruce

  • Macbook Pro Retina has 3 dead pixel clutter

    I have had my Macbook Pro Retina for a month and i have 3 dead pixel clutters. It first started with one, know there's two more. Should i wait to take it to the apple store to have it replaced or fixed.

    Definitely not normal. A month is a bit long for a replacement though. Take it back and they should be able to repair it though.

  • Macbook Pro Retina Display and Flash Player major issues

    Hello,
    Apple has recently released Macbook Pro's with Retina displays.
    I have tested my Flash application on the new laptop, and this is what I observe:
    1. My Flex SDK Flash application looks blurry and strange when I try to check it out from any Macbook Pro with Retina display, while looking sharp and OK from all other machines.
    On this screenshot you can sort of see the issue:
    http://i.imgur.com/UXHd4.png
    (Expand the image to the actual size, and compare the Flex SDK components with browser labels. Browser labels look crisp, Flex SDK components look a little bit blurry.)
    2. It is no longer possible to click on anything in Flash Player Dialogs, such as:
    * Flash Player Settings
    * Webcam or microphone allow/deny dialog
    * All other dialogs (peer-to-peer access, etc)
    This issue makes it impossible to use video chat applications on Macbook Pro Retina's because users can't click allow/deny when requested for audio/video access.
    I have submitted reports about this to Adobe BugBase here:
    https://bugbase.adobe.com/index.cfm?event=bug&id=3224151
    https://bugbase.adobe.com/index.cfm?event=bug&id=3224147
    Please fix these issues.
    Andrey

    @nvhdab - If you haven't already, can you please add a bug on your issue over at bugbase.adobe.com  If it's the same as 3224151 then it sounds like it's going to be fixed soon.  I'm trying to find out exactly when, but it might be in the 11.7 release now (4/2/2013 - Flash Player 11.7.700.170 Beta)
    @scottclayton - I'm going to ask the team to revisit the click issue.  I don't have a retina display so I can't confirm the issue.  Thank you though for putting up the workaround.

  • MacBook Pro Retina + 3 external displays + clamshell + heat issues

    Hi Apple Community,
    I have a 15" MacBook Pro Retina (2.6, 16GB) running 3 external displays (2x 22" via thunderbolt ports -> VGA & 1x 27" via HDMI). I am running in Clamshell (i.e. the MacBook Retina has the lid closed and is in a TwelveSouth BookArc). I currently have SMC FanControl running and set the fan to max (~5900 rpm) which is keeping the temp at ~54 degrees celcius.
    Basically I'm wondering if anyone knows about the heat management with using a macbook this way. Will too much heat damage the screen since the lid is closed etc.... How hot does the macbook have to get before damage can occur...?
    Many thanks
    SamNz8107

    Hey Samnz8107!
    Thanks for your reply. Saw it straight away and tried the update but it didn't work. When you open the dmg it says:
    "Alert:
    This software is not supported on your system."
    So that's unfortunate!
    Nope nothing comes up on the third screen when plugged in. And in the display window in the System Preferences, in arrangement, only the mac display and two displays are shown. It seems that the mac only wants to see two external displays. Because say all three are plugged in, it's whatever is plugged in last that isn't seen. So it's not a specific problem with the HDMI, because say if I unplug one of the VGAs, then the other VGA and HDMI will show no problem!
    When three screens are plugged in, the third screen is on and knows something is there (so it doesn't go into standby mode or ask you to connect something...but it just stays off. It's not a black screen - it is definitely off .ie there is no signal...but the screen does know something is there!
    Any further ideas?

  • My MacBook Pro Retina has suffered from poor (temperamental) safari performance since purchase.

    Because I often use my iPad or iPhone at home the safari issue hasn't really bothered me until recently and now, rather than just being temperamental, performance is just downright poor. It's taken well over 5 minutes to download ordinary BBC web pages on a 100Mbit broadband network. This has become typical  and now my kaspersky for mac security can no longer update its database - really annoyed at the prospect of having to get a new machine as I ordered the 2.7 GHz that took over 6 weeks to ship. Still within 6 months of my initial apple care.
    Any help would be appreciated.
    Thanks
    E

    Hello Poikkeus,
    Thanks for taking an interest and offering to help. Unfortunately, my Mac doesn't seem to be able to download any of the versions of istat citing that safari can't find the server - no luck using chrome either. Safari performance does improve with restarting the machine, however, I really don't want to restart my machine every time I use it; I had hoped that I could open my machine from sleep after using it the previous day without any issues. Is this a reasonable assumption? Occasionally I experience poor performance when using my work PC if I hibernate or log off rather than shut down, however, I expected better from my Mac.
    Furthermore, Kaspersky have just informed me that the error messages I receive when my security database fails to update indicates that there is a problem with my broadband connection. However, as I mentioned earlier, I have 100MBit broadband and experience no issues when using my work PC, iPad or iPhone.
    I'm guessing I'll have to follow your initial piece of advice and visit the Genius Bar to have them resolve the issue...
    Many Thanks

  • MacBook Pro Retina Backlight Bleed and Color Uniformity Issues

    I don't know how Apple considers this display as "in spec" with their standards. Along with a noisy SSD capacitor, I am currently working on getting a new machine from Apple.

    What you have is a hardware issue with no solution via software.  If you are looking for others who may have had the same problem and posted on this forum, use the SEARCH feature in the upper right hand corner.
    The Apple store genius bar technicians would be in a better position in this situation since they work on 'sick' Macs all the time.
    Ciao.

  • My MacBook Pro Retina 2013 has a Dead Pixel

    I just noticed my MacBook Pro Retina has a dead pixel in it. It is black then changes to white when on a black screen. (It's just one) It just came out of no where, and I wanted to know if I was still in Warranty? And if not how mush would it cost to repair it?

    Welcome to Apple Support Communities
    Your Mac is in warranty if you purchased it less than a year ago. In this case, you can try taking the Mac to an Apple Store or reseller to see if they can replace the screen, although I have seen cases in which Apple refused to replace it if there was only one dead pixel. You do not lose anything by trying this.
    Before taking the MacBook, make a backup of your files on an external drive with Time Machine.

  • Static elictricity on MacBook Pro Retina's body disrupts use while charging, any way to ground it?

    Hi, I have this old MacBook Pro Retina I got a couple years ago, and part of its original charging kit's wires gave up right next to the MagSafe2 plug, so I purchased a new power adapter, and it appears to not be grounded at all.
    When the notebook is charging, static on its metal body is so strong it completely disrupts any work. I cannot use trackpad almost at all, it won't register taps and the coursor is jumping all over the screen even if I don't move my finger at all. To use the notebook I have to keep one of my palms on the metal part of it, and even then after a while my fingers get a little burned on the trackpad, which is inconvenient to say the least.
    Anyone have any ideas, how can I can fix this or at least reduce the effects?
    I'm in Russia, it's 220v here, power outlets with 2 plugs (no 3rd metal one for grounding).
    I've read a bunch of articles about grounding outlets, but they all suggest to bury a metal cable into some soil, which is not possible as I live on 21st floor.
    I figured it's the new power adapter's fault, because the old one doesn't act up like that (but I am reluctant to keep using it because its inner metal wiring in places is not covered by plastic anymore, and I fear it might cause a short circuit or something).
    When I purchased the new adapter, I was assured it's completely original, but now I suspect it might be a counterfeit, so I would just have purchased another new one, but kinda afraid it will not be original too and will cause the same problems.

    It keeps the green light on for a while after I unplug it from the notebook. The scratched part is extension from the old adapter.

  • Early 2013 Macbook Pro Retina 2.7 i7 512GB SSD and 16gb Ram with Serious Cuda Problems! Trying to teach Apple their Macbook Pro Retina isn't a Pro Jan. 11. 2015.

    Apple replaced the logic board, wiped the computer, did a fresh instal of the OS, and also a fresh instal of all the programs during the beginning of 2015. The GeekBench scores are the highest of any of the similar computers (at least on the day of my testing). But here's what's happening. The Macbook Pro Retina has a GeForce GT 650m with Cuda Technology and it can't handle editing in Premiere Pro with Cuda Acceleration turned on. Open CL, a second form of graphic acceleration on the Macbook Pro, appears to be functioning properly.
    At the Apple Store on 1-10-2015, I was told that since the logic board and the graphic cards have been replaced that there is nothing they can do and they recommend contacting Corporate. This comes after they told me to buy a new logic board and that that would solve the problem. This comes after Apple did not listen, for over a month, about the possibility that they didn't properly build a professional notebook computer.
    The computer displays a black program monitor screen, at random times, when the user edits footage with Cuda Acceleration enabled. It used to lead to an entire system crash and/or a Premiere Pro crash before the operating system was completely re-installed. My solution, since I bought the computer, was to edit in Open CL... However, I've come to learn that there is a major difference in performance between Open CL and Cuda Acceleration.
    For the Macbook Pro Retina, Adobe Media Encoder render times are about 20% faster with Cuda Acceleration than Open CL. The 2013 Macbook Pro Retina appears to be able to handle Cuda Acceleration in Media Encoder, but I have had a number of issues leading to program crashes on every project before the new logic board and operating system were installed. For over a year and a half, I actually never used Cuda Acceleration. Having sent every crash report and user data to Apple over that time, I truly expected an update of some sorts and it never came.
    FYI: The latest Macbook Pro Retina uses the GeForce GT 750m... This is essentially the same graphic card that performs about 10 - 20% faster due to a new "boost mode." More importantly, it actually has the exact same number of Cuda cores. Having the same number of Cuda Cores means that the Cuda Acceleration is essentially the same when exporting or viewing video. To prove a point to Apple that their 2013 Macbook Pro Retina isn't functioning properly, I bought the latest computer with the 2.5 i7, 16gb Ram, 512gb SSD and I can honestly say that the 2014 model works perfectly fine with Cuda Acceleration turned on while editing in Premiere. I can also say that a proper render test proved the 2013 and 2014 model to be the exact same.
    I'm new to this whole pay $2700 for a computer that your manufacturer didn't / can't test properly, so I will be contacting Apple and speaking with Senior Advisors, their Customer Support division, and will soon speak with their Corporate branch. I'm confident that the Early 2013 Macbook Pro Retina with a 2.7 i7 16gb Ram and a 512 SSD is nearly the same at rendering video and editing video, provided the Cuda Acceleration works, as their latest 2014 Macbook Pro Retina with the 2.5 i7 processor 16gb Ram, and a 512 SSD. It's truly a great computer and a great build, minus their current inability to properly test / diagnose their computer.
    Knowing that the latest graphic card in the Macbook Pro lineup is essentially the same model, I feel that Apple is not directly looking into the viability and life span of their current Macbook Pro Retina product line. They can't test for performance issues relating to their graphic cards, so why consider buying from them when the end user is actually in a position to experience up to a 20% decrease in certain professional programs.
    For future reference, I'd strongly urge other individuals to avoid purchasing Apple products if they offer Cuda Technology. In my opinion, Apple is an Open CL organization, at best, who is not responsibly manufacturing / producing computers that fit their organization's strengths. For a fact, they can't test their Cuda Technology and won't even attempt to address Cuda Acceleration errors for Apple owners (01-11-2015). I say this having walked out of the Apple Store on 1-10-2015 with virtually no support other than to contact Corporate.

    Looks like a RAM issue.
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x000000000000000000000000000000000000

  • MacBook Pro Retina 13' late 2013: built-in keyboard and Multi-Touch trackpad may become unresponsive after HDMI unplug

    At my desk I usually plug 2 external monitor (one via HDMI, one via Display port) and an external APPLE USB keyboard and BT touchpad.
    Most of the time I unplug the HDMI cable the built-in keyboard and touchpad stop working.
    This is very annoying issue because I have to force a shutdown to fix that.
    Only sometimes it got fixed by plugging back the HDMI cable.
    I already patched with MacBook Pro Retina EFI Update v1.3 and Issue persists.
    Is there anyone else with the same issue?
    Any idea on how to fix it?

    Have you done an SMC reset lately? Intel-based Macs: Resetting the System Management Controller (SMC)
    May or may not work.

  • Macbook Pro Retina External Monitor Blurry

    Just got a new macbook pro retina and got it home. After getting everything transferred over from my old toshiba I connected it to my 1 month old HP external monitor and the display is blurry. I have read on many sites that this is a common problem however I can not find a solution. I am hook up from HDMI to HDMI. O don't really want to go through trial and error of different adapter for the lightning port if that will not work. I have tried different HDMI cables to no success. Any Ideas?

    Hi AO1 James,
    If I understand correctly, the external monitor was blurry from the moment you plugged it into your MacBook Pro with Retina display. I would first check the resolution settings for the monitor with the "How do I select additional resolutions on my display?" section of the following article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    If it remains blurry after selecting your monitors optimal resolution, I would use the steps under the "Reset the system" section of the article to help troubleshoot the issue.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Macbook Pro Retina 15 late 2013 won't turn on after being sleep

    I've been having the an issue with my macbook pro retina 15 late 2013 that I bought 2 weeks ago. After a long time of being slept when I try to turn it on, it won't. I press the power button several times and nothing happens, after a long time of trying then it turns on. and I get the message that the machine turn off because of an error but nothing else. I think that's not ok for such an expensive laptop. I had the first version of the macbook pro retina display and never had an issue like this even though I install a lot of apps from app store and third party apps also. I was running parallels with 3 microsoft windows os and never had an issue like this. In this case I haven't installed anything on my new macbook pro besides parallels and the windows seven os. So I don't know if I should take it to the apple store maybe they could change it for another one I don't know.
    Does anyone have the same problem?
    sorry for my english

    Well I have this problem too, do you get a message saying 'an error has occured please press a button to restart' or something similar when you just brosing the internet or watching a movie.
    P.S I use safari and QT.

Maybe you are looking for