My macbook pro shows some wifi networks, but not mine. i dont know whats wrong, the wifi networks works on my phone as well as other laptops.

my macbook pro shows some wifi networks but not mine. it comes up on other computers as well as my phone but will not show up on my wifi network options.

  Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
https://discussions.apple.com/community/mac_os?view=discussions 
http://www.apple.com/support/macbookpro

Similar Messages

  • Hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

    hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

    1080i or 1080p

  • Hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

    hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

    mangesh171 wrote:
    my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
    No.
    Power Adapter/ cord wattage
    “Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue.”
    http://support.apple.com/kb/HT2346
    Best.

  • I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
    There are ways to do this however, try searching Google for:  Installing Logic 8 under Lion or Mountain Lion.

  • I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?

    I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?
    I'm aware that all printers are not airprint enabled but since i can print form my imac that should not be a problem right?

    Hey Fredrik68,
    I would double check and see if you meet all the requirements for AirPrint here, including the printer model:
    AirPrint Basics
    http://support.apple.com/kb/HT4356
    Have a good one,
    Delgadoh

  • I have windows 8 on my PC and icloud says apple ID is valid but not an icloud account. What is the difference?

    I have windows 8 on my PC and icloud says apple ID is valid but not an icloud account. What is the difference?

    You can't open an iCloud account using a PC. create it on an iPad or Iphone, or a Mac. Then you can use it on your PC

  • HT201303 I dont know what is the problem to bye some thing frome some games

    I dont know what is the problem to bye some thing frome some games

    I don't know either, more information would be helpful.

  • Can't get iCloud mail on my MacBook Pro. I used to, but not now.

    I have been traveling, and using all sorts of servers to get my mail through the mail program on my MacBook Pro (Blue stamp icon). But now I am home, and the problem that started while over the road is continuing.
    Under iCloud, the mail icon is checked. Under accounts, the only place blank is the IMAP Path Prefix. Port is 143, and SSL is checked. Authentication is Apple Token.  Checked are also "include when automatically checking for new messages" and "compact mailboxes automatically"
    Any help to get my mail up and running again?
    Thanks in advance.

    You're going to have to give us more info than "I can't get net flix to work."
    What have you done to try to get it to work?
    Have you installed Silverlight?
    Have you activated you Mac with NetFlix?
    How are you accessing NetFlix? (Browser, Boxee....)
    Exactly what is happening?

  • Downloaded photoshop elements 11 to MacBook Pro OS 10.7.4 but not reading docs-look encrypted

    downloaded photoshop elements 11 to MacBook Pro OS 10.7.4 but unable to read download- text only doc which reads encrypted

    here's a link to ps elements 11 help (including documents):  http://helpx.adobe.com/photoshop-elements/release-note/photoshop-elements-11-release-notes .html

  • AirPort Express Sees Neighbor's Network But Not Mine!

    Hi everyone!
    I’m a complete newbie to wireless networking but expected my AE to “just work.” It doesn’t, so far.
    I plugged-in my cable ethernet cable and USB printer cable to the AE. I then plugged the AE into the electrical socket. Got a green light.
    After multiple attempts and even performing a “factory default reset,” the AirPort Utility scan will NOT recognize the AE. Am I correct in thinking that it should?
    In Network in System Preferences, I can connect to my neighbor’s wireless network but when I create a new network, all I get is a green AE light and the note that “AirPort has a self-assigned IP address and may not be able to connect to the Internet.”
    So, I have no wireless Internet connection. The cable internet connection (cable ethernet direct to the iMac) is working fine.
    I’ve read in other discussions that a problem may exist in using AE and 10.5.6. Yes? No?
    Anyway, if some kind soul would help me figure out what’s going on and how to get AirPort Utility to recognize my AE, I would be eternally grateful!
    Please advise and don’t hesitate to point out my errors in trying to set up my AE. I need to learn and so do others.
    Sincerely,
    flyboy01

    Welcome to the discussions forum Andy.
    After multiple attempts and even performing a “factory default reset,” the AirPort Utility scan will NOT recognize the AE. Am I correct in thinking that it should?
    Yes. But you have to select its network in your Airport menulet - after the reset it will appear as "Apple Network xxxxxx" where xxxxxx are the last three bytes of its MAC address. If you're connected to your neighbor's network while running Airport Utility, it won't see your Express.
    Assuming you've done this already and AU still doesn't see your Express, read on.
    Sometimes cable modems get confused when you connect different devices to it. Reset your cable modem (power it down for a while). Remove the Ethernet cable from your iMac and leave it removed. Perform another "hard reset" of your Express then connect it to the cable modem. Power up the cable modem.
    Does Airport Utility see the Express now?
    Yes: Answer the setup questions in Airport Utility and you're done.
    No: I'd wonder if your cable modem still hasn't been properly reset. Try leaving it powered off for the better part of an hour. While it's cooling look for a reset button and try to find documentation addressing how to reset it. Also, reset your Express again. Couldn't hurt.
    Still not working? Gnash teeth for a while and curse the gods of wireless. Then, create a new, temporary user account on your iMac. Log out of your account and log in under the new account. Any changes?
    Still not working? Post back because someone will happily point out that both of us missed something obvious.

  • I am trying to download songs i recently purchased onto my ipod, they are not in my library but a seperate folder ( dont know what happened there ) there is no cloud next to the new songs ! how on earth do syn them into my ipod. Please help :)

    I am trying to download songs i recently purchased onto my ipod, they are not in my library but a seperate folder  on i tunes ( dont know what happened there ) there is no cloud next to the new songs ! how on earth do sync them into my ipod. Please help

    Hey liverpoolellie!
    Here is an article that should be able to address this issue for you:
    Syncing music to iPod shuffle
    http://support.apple.com/kb/ht1719
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT5313 why i cant update it ... always saying NO PERMISSION please help me dont know what to do wifi connect also is down and slow

    please help me since i update my os snow leopard to os lion its seem to be nice and operation is very well ... after a month its gives trouble i cant update it and cant watch video from youtube , cant attach any files wifi is up and down with my airport express? dont know what to do now ... please help me and advise pls

    Read here  >   iOS: Understanding the SIM PIN

  • I am running OSX 10.7.5 on my Macbook Pro. I have iChat but not Messages. IS there some way to upgrade or download an app for Messages? Thank you!

    Would like to get Messages on Macbook Pro OSX 10.7.5 so that I can sync with iMessages from my iPhone 3GS. Not sure if this is possible though. Or do you  have to have Mountain Lion to get Messages? It seems that I only have iChat on my Macbook.
    Thank you!!

    You need to have Mountain Lion to get it.
    (89065)

  • MacBook Pro can connect via Airport but not iPhone or iBook G4.

    Anyone have any ideas? My Macbook Pro can connect to my Airport (v.7.3.1, 802.11n) but not my iPhone or iBook or a Windows Computer or WiFi Blackberry.
    The connection is strong and detectable by the ibook but "unable to connect".
    Somethings up with the settings but not sure what.
    Any ideas?
    HELP!
    thanks
    --K

    I've tried Channel 1,2,3,4,5 (still need to try the others)
    Secured or unsecured the only wireless connection that works is my MacBookPro.
    I get the message "unable to join network..." The connection is very strong.

  • HP 8600 Plus - Printer is on wifi but not visible/usable for any computers on the same network

    Hello, 
    I am on windows 7 x64 and I have an HP 8600 Plus. This printer has been working fine since we bought it but suddently it does not show up on the network. It started when my wife would try to print and the HP software says it cant connect to the printer. I tried resetting everything, including the router. I restored factory settings on the printer as well, still no luck. 
    I am able to connect the printer to wifi. The indicator shows that it is connected and ready. It has no errors there. It has an IP address and all seems well. I have several other computers on the same wifi network and none of them can SEE the printer. It does not show up in network devices and I am not able to install it using the HP wizard software (it gets stuck looking for the printer, then asks for a manual IP address and it still fails)
    Please help, it worked fine for a few months and suddenly it is 100% not working!

    Anyone out there ever seen anything like this before? I searched the forums pretty heavily and I see similar issues but none quite like mine.
    I have also tried the Print and Scan Doctor. Again, since the software cant find the printer on the network it won't connect and won't resolve any problems. It tells me to make sure the printer has a wifi connection and that the blue light is on and the indicator is showing it is connected, all of which are true. 

Maybe you are looking for