My macbook pro shut down and cant turn t on, My macbook pro shut down and cant turn t on
Help mepls regarding my mbp shutdown and doesnt turn on
Arnelche,
which model MacBook Pro do you have? When you press the button next to your battery indicator lights, how many of them light up? Are you able to test your AC charger with another MacBook Pro, or to test another AC charger with your MacBook Pro, to make sure that your AC charger is working properly?
Similar Messages
-
My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do
Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best. -
My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?
A four year battery could be dead. I'd contact an Apple Service Center.
-
Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
My Macbook Pro just randomly shuts down and I have to plug it into power to be able to turn it back on. Anybody got any suggestions?
Troubleshooting: My computer won't turn on
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
my macbook pro shuts down and doesnt let me turn it on after a few days i try to turn it on and it works but then after a few hours or so of using it it turns off again and the cycle of me waiting days to turn it back on happens again whats the prob?
If you haven't already done so, try this simple step first.
-
Macbook pro 2010 is crashing and nonstop clicking noise. cant forcequit either i am forced to shut down maually. whats the problem? does the hardrive needs to be replaced?
Welcome to Apple Support Communities
Your hard disk is damaged. Make a backup of your files with Time Machine > http://support.apple.com/kb/HT1427 Alternatively, you can use Carbon Copy Cloner to make a clone onto an external disk.
Then, look for a hard drive. You can use a 2'5" SATA hard drive, and you can buy it at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ Seagate and HGST drives have good performance, and 7200 rpm hard drives will give you a slightly better performance.
After installing it, start up from the clone (if you made a clone) or hold Command, Option and R keys while your Mac is starting (if you created a backup). In the second case, you just have to choose the option to restore a Time Machine backup and follow the steps.
In the case of a clone, use Disk Utility's Restore feature to restore the external drive content onto the internal disk > http://pondini.org/OSX/DU7.html You may need to format the hard drive in "Mac OS Extended (Journaled)" -
I have a mid 2010, Macbook Pro '15. Summer of 2012, it kept shutting down and making the three beeping noises, so I took it in for repair. I was told that my Logicboard needed to be replaced, so I replaced it, and took my Macbook abroad with me. Halfway through the summer, the three beeping noises resumed, and since I was abroad, I couldn't use my 90 day warranty and take it back for repair. By the time I returned to the US, my warranty ended, and I was told that the RAM actually needed to be replaced. So I replaced that.
In May of this year, my laptop wouldn't start and instead showed a folder with a question mark. I took it to repair and was told it was the hard drive wire that needed to be replaced, so I replaced that. Less than two weeks after, my Mac began freezing whenever I had a YouTube video or song playing- it made short, staticky sounds and then shut down. Now, it shuts down randomly even when I'm not playing videos or songs, and regardless of if it is running on battery or plugged in. Since I got my hard drive wire replaced, I've also noticed that the laptop takes an incredibly slow time to start up.
The last the Genius Bar technicians looked at my computer when replacing the harddrive wire, they hadn't said anything else was wrong with my laptop.
I've spent almost $1000 total fixing my macbook and am quite sick of going through this over and over again. Can anyone help me know what went wrong this time? (I have no apple care) Thank you in advance.Check to see if you've any panic logs -> http://support.apple.com/kb/HT2546.
If so, post the text of the latest.
Clinton -
I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it
If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.
-
My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.
-
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.
Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.
-
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u
Option 1
Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks -
I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it? I've tried a few things i've seen online but the futhest ive got is to put the start up disk in when you makes it go to a grey screen with an apple logo and the spinning wheel which then stops spinning. Can anybody help?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once.It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
I changed my Apple ID password and successfully validated it. Problem is the iPad App Store won't recognise me anymore. if I select an App to update it asks me to enter password, then says "You have not verified your Application ID.Tap OK to view t
-
Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS
I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.
-
I am not able to connect with Itunes Match. I constantly receive the message error 4010
I am not able to connect with Itunes Match. I constantly receive the error 4010.
-
Do I need to convert 6i form to 10g form
Hi all, I am currently working on a custom form (version 6i). we have a similar standard form in our project where they applied a patch to that standard form in order to convert it to 10g form and so some additional lines has been added to that stand
-
Start Data Transfer Aborted Activity Error
We got an error in phase Start Data Transfer Runtime Errors CONNE_IMPORT_WRONG_COMP_LENG Short text Error when attempting to IMPORT object "<LT_PORTION>". This is from TDMS --- Table TPMP: Access plan: 00004 Writing behavior: 1 --- u0160t