My MacBook Pro (snow leopard osx10.6.8) very slow internet

Seems my MacBook Pro isn't up to the task of opening more than one web page at a time and when I go to print it doesn't - any ideas? Right now I am using a mothballed Dell xp

Yes, as long as you meet the other requirements:
http://www.apple.com/macosx/how-to-buy/

Similar Messages

I have installed mountain lion on my macbook pro ,but it made my mac very slow. Would someone please tell me how to uninstall this one and reinstall snow leopard?

Hello,
I have installed mountain lion on my macbook pro ,but it made my mac very slow. Would someone please tell me how to uninstall this one and reinstall snow leopard? I tried to do it by my original CDs but macbook pro didn't let me to do it.
Thanks

It would be easier to just fix whatever is making your machine slow.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.

MacBook Pro (snow leopard) 2006 will not restart. Getting blank screen with folder (?)

MacBook Pro (snow leopard) 2006 has begun to turn off attached Cinema Display over the last two days. Comes back on on restart. This morning, the MacBook screen also went blank white on restart. Tried to use Snow Leopard CD to restart but it was ejected and folder with ? is only thing that displays. Will not restart. Have replaced hard drive 6 months ago. Help! What's wrong? I need this computer for work.

hawpotr wrote:
1. replace my current internal HD and convert it to external HD for use as secondary boot drive,
No. That has no advantage for you.
leave the internal HD alone and purchase an external HD that I can clone and use as boot drive in case of emergency?
Yes. I use Carbon Copy Cloner to make a boot drive and as a backup (in addition to Time Machine). CCC allows one to make incremental changes as well as creating a copy of the recovery partition. This means that if run on a proper schedule, you data will; be well protected and the MBP can be in operation very quickly if the internal HDD should fail.
A clone should be a 2.5", 9 mm thick SATA HDD so that it will fit inside the MBP. It can be powered from the USB port thus not requiring an AC outlet. In my collection of HDDs, I favor HGST and Seagate products. I principally use OWC enclosures that allow for USB, Firewire and eSATA connections. These are expensive but one can use a more modest one as well of one can tolerate longer data transfer times.
Here is a link showing some available SATA HDDs that will complement your MBP:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
You can look for enclosures on the same web site.
Ciao.

Macbook Pro Snow Leopard; WiFi keeps dropping, no IP Address

Macbook Pro Snow Leopard; WiFi keeps dropping. Issue is Macbook is not getting an IP address from the wireless routers DHCP Server. Tried all options in the forums. Reboot, changing security, PRAM reset .. nothing. Problem keeps happening. No issues on XP laptops and Nokia phones.
Even the iPhone, iPod and iPad seems to be fine. It is just the dang gam it Macbook pro and it is driving me crazy.
All fixes tried, changing wireless mode, security, PRAM ... only thing left is to rebuild the mac which i was hoping I can avoid somehow.
Any ideas to fix this would be great!
RK

Change your router channel. Sometimes this all you will have to do.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
How to diagnose and resolve Wi-Fi slow-downs

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

Printer says "sending data..." and doesn't print (photosmart c440 & macbook pro snow leopard)

Hi, my photosmart C440 printer suddenly stopped working and wont print. The message says "Sending data..." forever but never prints. The printer is on but doesn't respond to what my computer says. I have a macbook pro snow leopard OS. This has never happened before, I didn't make any changes to the system. When the problem first appeared, I reinstalled the driver and was able to print once, then it stopped working. Then I installed snow leopard and it stil doesn't work.
Thank you!
This question was solved.
View Solution.

Let's reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have OSX 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD. Can someone please give instructions?

I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
Can someone please give instructions?

Welcome to the Apple Support Communities
To restore the MacBook Pro to factory settings:
1. Make a backup of your files because everything will be erased.
2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and install Mac OS X

Why does my macbook pro, snow leopard get so hot so quickly?

why does my macbook pro, snow leopard get so hot so quickly?
Can someone give helpful suggestions on solving this problem?
Thanks!
NELLY

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

MacBook Pro Kernel_Task over 300% ; laptop running very slow

My new (4 week old) MacBook Pro suddenly this weekend started running very slow with the fan running constantly. I found the "kernel_task" was running the CPU over 300%. I tried various methods mentioned in different threads but nothing worked. I eventually went all the way to wiping the disk and reinstalling the OS. This has NOT fixed the problem. I do not know where to go next. I am posting a copy of the EtreCheck report I ran, and I am looking for any help.
The next step is taking this thing back to the Apple store. I love my MacBook, but not when it is not lagging like something running Windows ME. I expected more out of this machine than this.
EtreCheck Report:
EtreCheck version: 1.9.11 (43) - report generated June 5, 2014 at 9:53:46 PM CDT
Hardware Information:
          MacBook Pro (Retina, 13-inch, Late 2013)
          MacBook Pro - model: MacBookPro11,1
          1 2.6 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel Iris - VRAM: (null)
System Software:
          OS X 10.9.3 (13D65) - Uptime: 4 days 4:34:59
Disk Information:
          APPLE SSD SM0512F disk0 : (500.28 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    MacHD (disk0s2) / [Startup]: 499.42 GB (487.46 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
User Login Items:
          None
Internet Plug-ins:
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               6%          WindowServer
               2%          hidd
               1%          Dock
               0%          com.apple.WebKit.Networking
               0%          mds_stores
Top Processes by Memory:
          188 MB          Safari
          165 MB          com.apple.WebKit.WebContent
          66 MB          WindowServer
          49 MB          Finder
          41 MB          com.apple.WebKit.Networking
Virtual Memory Information:
          4.96 GB          Free RAM
          1.64 GB          Active RAM
          387 MB          Inactive RAM
          849 MB          Wired RAM
          770 MB          Page-ins
          0 B          Page-outs

The kernel is using excessive processor cycles. Below are some possible causes for the condition.
Throttling
When it gets high temperature readings from the hardware, or a low-voltage reading from the battery, the kernel may try to compensate by interrupting the processor(s) to slow them down and reduce power consumption. This condition can be due to
a buildup of dust on the logic board
high ambient temperature
a worn-out or faulty battery in a portable
the malfunction of a cooling fan, a temperature sensor, a voltage sensor, or some other internal component
Note that if the problem is caused by a sensor, there may be no actual overheating or undervoltage.
If the computer is portable, test with and without the AC adapter connected. If kernel_task hogs the processor only on battery power, the fault is in the battery or the logic board. If it happens only on AC power, charging is causing the machine to heat up. That may be normal on some models. CPU usage should drop when charging is complete.
Apple Diagnostics or the Apple Hardware Test, though not very reliable, is sometimes able to detect a fault. For more thorough hardware testing, make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If nothing is wrong with the hardware, then whatever you can do to improve cooling may help.
Installed software
User-installed software that includes a device driver or other kernel code may thrash the kernel. That category includes virtualization software, such as Parallels and VMware, as well as most commercial "anti-virus" products. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility by completely disabling or removing the software according to the developer's instructions, or starting in safe mode. Note, however, that disabling a system modification without removing it or testing in safe mode may not be as easy as you think.
Corrupt NVRAM or SMC data
Sometimes the problem is cleared up by resetting the NVRAM or the SMC.
External display
Connecting an external LCD display to some MacBook Pro models while the lid is open may cause this issue. If applicable, test by closing the lid or disconnecting the display. You might get better results with a newer LED display.

MacBook pro, snow leopard, iPhone and Bluetooth PAN problems

Short Version:
I am having connectivity issues connecting my new MacBook Pro (MBP) to the Internet thru a Bluetooth PAN on my iPhone4. This has been working fine for a few days and then today it just stopped working responding that my iphone connection is not available, it's off, too far away or whatever. This is not the case. When I try to connect the iPhone to the MBP the iPhone is saying my MBP is not supported. I can pair the devices, but as soon as I try to connect to the Internet thru the iPhone via the MBP the connection fails.
Long Version:
I received a shiny new MacBook Pro only a few days ago and I am having Bluetooth Paired networking issues as of today, 2nd, March, 2011. The MacBook Pro is running Snow Leopard 10.6.4, and is brand spanking new, unmodified, factory defaults.
The iPhone(s) I am using are iPhone 4's with iOS 4.1
On the first day I paired the MBP with both iPhones with ease, it was so easy my grandparents could have done it. So point and click and it just worked....
The iPhones are set up in iTunes with names similar to dave1 and dave2
On the MBP I can select which device I want to connect to the Internet by going to the Bluetooth icon and connecting to whichever iPhone I have handy at the time. Since the plans are limited connectivity, I do load share between the two.
Today, for no apparent reason, I have been unable to connect to my wife's phone just getting a basic "The Bluetooth network is unavailable" message telling me the iphone is out of range, not on, etc etc etc. Not true.
No problem, I just connected to my phone instead. Occasionally I tried her phone again, but it just never worked. I eventually got her to reboot it, still no joy.
Then, a couple of hours ago, while in the middle of reading my rss feeds, my Bluetooth connection dropped out. My phone is sitting right next to the MBP. So that's not the issue. No amount of reboots of either the MBP or the iPhone have fixed this. I have unpaired and repaired the devices (on both phones) countless times. I have removed the sim card and rebooted, I have disabled and reenabled Bluetooth on both, rebooting before doing this, and after and during, I have reset network settings. Nothing I try is working here.
Pairing alone is an event, but here's an example of what's happening:
I go thru the motions, the MBP shows me a number (eg, 451234) and the number is displayed on the iPhone. They see each other. The numbers are the same. Good. I click PAIR on the iPhone and MBP and everything appears good. But then if I go to connect to the iphone on the MBP I get the out of range error.
I have made both discoverable, and tried to connect to the MBP from the iphone, and got a different error message altogether: Connection Unsuccessful - "{insert my name}'s MacBook Pro" is not supported. W-T-F? It was an hour ago? What has changed?
Then, the only option on the iPhone is to "Forget Device". ok, forget it, and start again. Same same.
Neither the iPhones nor the MBP have been upgraded or changed in anyway today, or even recently. In fact, as mentioned earlier, I was actively using the connection without any issues for a number of hours when it just stopped for no apparent reason.
Not that these matter, but I am in Thailand (live here for the time being), I'm on the TrueMove network, which offers 3G coverage in my area (Patong Beach).
This could easily have been filed under MacBook Pro, iPhone, OSX and possibly many other discussion headings, because the issue can be any or all of the OS, the MacBook Pro Bluetooth adapter, the iPhone Bluetooth, (iOS for that matter), or some other unforeseen conditions...
My head is sore from pulling my hair out. I am open to any suggestions (reasonable or otherwise!)
For further info (not that this post is long enough already, or anything, but), I thought it was interesting that the phones didn't fail at the same time, so I pulled out an old iPhone 3GS and set it up, but after pairing, the two can still not connect.
I know its not an issue with the data plan on the iPhone since I'm here surfing now without an issue, so it's not a data problem.
Open to ideas....
If you've read this far and you're ever in Phuket, give me a call... I'll shout you a beer

Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

Trouble transfering music to iPhone 5 iOS 7.0.6 from iTunes 11.1.5 on Macbook Pro Snow Leopard 10.6.8

I recently fixed my Macbook Pro and updated the software to Snow Leopard 10.6.8. I am having trouble syncing my iPhone with iOS 7.0.6 to my iTunes which is 11.1.5. It gets stuck on step 4 of 4 "Waiting for changes to apply." I've reset sync services and done a lot of research about what I can do to fix the problem to no avail. I would appreciate any help availible.
Thanks

I had the same issues, reloaded itunes, updated driver, blasted everything out, etc., did everything, short of doing a rain dance. I finally got it to sync by clicking the box "sync only checked songs and videos". It also allowed me to sync books, etc. Good Luck Bwerner25.

HP Photosmart C5580 and MacBook Pro Snow Leopard wireless printer with router

I have a macbook pro OSX operating system and a C5580 HP Photosmart printer. I have spent hours with netgear as I did purchase a new router getting my macbook pro to print wirelessly. Whatever the fix it is temporary and my private tech has to take control of my computer to get to work again.
1. am I printing with bluetooth? through router?
2. what is happening whenever it gets out of sync and how can I fix myself?
3. computer says "idle" but shows device connected. I can print test page wirelessly, but not current document. Documents print when I connect with usb cable.
I felt I should contact HP since I think it is their problem though netgear has been very helpful. I understand that I do need USB to scan, but shouldn't have to have it to print. We have downloaded all of the most current drivers and software.

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
If you loaded the HP software from the printer CD and unless your CD says it specifically supports 10.6 Snow Leopard, you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now, run a Software Update.
Next, remove and re-install the printer in System Preferences, Print & Fax.
You do not need the software now since Snow Leopard has both print & scan drivers built-in. Scan from Preview or Image Capture apps. Scanning from the front panel of the printer does not yet work.
Answers:
1. No, routers don't do bluetooth. If they are wireless routers they use wi-fi (802.11).
2. I don't know, you have not told me enough about your symptoms or system.
3. Same as #2.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannot install GoLive 8.01 0n new MacBook Pro/Snow leopard

Purchased a brand new MacBook Pro (with the new Snow leopard) so I could leave my house and still work.
The most important application I use is Adobe golive CS2 8.01.
I have the 6.0 disk, and the upgrade registration number but they will not install in the MacBook Pro/Snowleaopard. I've tried 50 times. It will allow an install of the 6.0, but says my registration number is invalid for the upgrade.
Adobe doesn't support the product anymore on any level. I'm beside myself. The laptop is worthless to me without that application.
I've tried replacing the keylogin, prefs reinstalls etc... nothing.
I'm desperate. If anyone has any ideas, please help.
g
Regards,
George Edgar Joyce III
JoyceMedia

George Edgar Joyce III wrote:
hang on a second...
GL CS2 and ( both work on snow leopard. Matter of fact Adobe LiveMotion works on Snow leopard! Howe3ver, you cannot open your se\aved documents... still working on this too....
but, GL works great with SL....on my desktop, golive was already installed when I upgraded to snow leaopard... works great...
I doing a clean install on the laptop..that's where I'm stuck...
wonder is you upgrade with GL INSTALLED ON YOUR LAPTOP...IT SHOULD STILL WORK...
let me know if you try it..
i'm thinking of downgrading the OS on the laptop, install GL and then upgrade back to SL... too much freakin work!
g
Downgrading, install GL, then upgrade sounds like a good move. Let me know if it works... if you do it. I understand the frustration of having to go to all this trouble. I've had my share of problems lately. First my MBP hard drive went bad. Had to reinstall everything. Then I took it on a trip so I could keep up with client work, and it died again. Took it to Apple in Portland, Maine. They had to ship it off for repairs again. This time the Logic Board and Video Display. Now my G5 is acting up again. Often too busy to deal with it.
I'll follow along to see how things go for you. Keep us posted if you would.

MacBook Pro + Snow Leopard + SIL3131 1.1.11 driver still no go! Help

Folks I have a unibody MacBook Pro (with access to the battery), Snow Leopard fully updated, a Rosewill RC-605 2 port eSATA II Express Card, and the latest [air quotes] working SIL3132 1.1.11 driver and I still get kernel panics.
I've ried other driver versions from Sonnet, SI, and Firmtek to no avail.
Is there a solution out there? I really need my eSATA drives. FW800 is just too slow.

Have you tried on the MacBook forum yet?

Macbook pro snow leopard 10.6.8 with VMsoftware partition can i upgrade to Yosemite

I have a MacBook Pro laptop bought in 2010 using Snow Leopard 10.6.8. 4 GB of Memory and 2.66GHZintel core i7. I have also partitioned the drive with VMware to use a windows application. If I have backed up all personal photos documents, music, movies etc and I don't mind if I lose all the info in the partition VMware, is it ok to
update to Yosemite. Is there anything special I need to do, like uninstall the VMware first? Also do I need more than 8GB on my hard drive?
Any one done anything similar and if so were there any issues?
thanks for any help,
musemhp

VirusBarrier needs to be uninstalled using the original installer. That installer will have a button that allows you to uninstall the software. If you no longer have the original installer, you will need to re-download it.
BitDefender must be removed using the uninstaller provided by the developer. That uninstaller is found on the .dmg file that also contained the original installer. If you no longer have that, you will need to re-download it.
Do not try to locate and remove these items manually! They must be removed using the uninstaller!
Note that it's a bad idea to have two anti-virus programs like these installed and active at the same time. That can easily cause all manner of problems, including serious performance problems. For more information about protecting yourself against malware, see my Mac Malware Guide.
You also have SpeedIt installed, which is a badly outdated program that has been discontinued. The developer is no longer in business. I would be surprised if it wasn't causing problems. Unfortunately, because it is so old and the developer's site is gone, I cannot find any uninstaller or uninstallation instructions. See if you have a SpeedIt uninstaller somewhere. If you still have the SpeedIt installer somewhere, that may include the uninstaller.
If removing those programs doesn't fix the problem, the only other third-party kernel extensions you have installed are:
com.markspace.driver.Android.RNDIS 1.2
com.roxio.BluRaySupport 1.1.6
You'll need to remove those using the uninstaller provided by the developers (markspace.com and roxio.com).

My MacBook Pro (snow leopard osx10.6.8) very slow internet

Similar Messages

Maybe you are looking for