My Macbook Pro sounding to much

I updated recently to the new OS X 10.10.1 and now the computer sounds a lot. Its obviously the fan. Is there a way to make the computer quiet again? It is very distracting to have that sound when you are working. In CPU activity something called launchd is using 43% of the CPU.

Try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, open Activity Monitor to ALL PROCESSES and look for applications that may be using a lot of resources.  If they are not root, shut them down.
Ciao.

Similar Messages

  • MacBook Pro: Sound Issue. Help needed.

    Hi. Recently, my headphones (I use on my iPod Touch too), and my MacBook Pro sound have not been working lately. I have been looking for a red light, but cannot find it. I left my Mac asleep (with headphones in!), and when I opened back up, niether my sound on both haven't been working. I'm trying to configure my Mac settings, but I'm stuck.
    Can someone please help me answer this? If you do not know the answer, and have the exact (or close to the exact) same problem, please do not post. I will need all the assistance I can possibly get. Thank you so much.
    ~AppleFan17

    In troubleshooting, often a concrete or exact solution is elusive. Here's what I can offer:
    Troubleshooting no audio issues with built-in speakers: http://support.apple.com/kb/TS1574
    Reset SMC: http://support.apple.com/kb/HT3964
    Reset PRAM: http://support.apple.com/kb/ht1379
    Good luck.

  • MacBook Pro sounded like a drill machine, seriously. What to do?

    My MacBook Pro sounded like a drill machine, seriously. Think it was the HDD. The sound was so loud that I almost fell off my chair. Next day I get this "restart" message, so I try to restart. I then spent an hour trying to turn the mac back on. The mac-made just beeps and would not start, just a black screen.
    Now, everything seems normal.. but I have had problems turning on the mac several times. It will happen again. What to do?

    If you have not done so already, back up your data.  If your computer is under warranty, Apple will repair your computer for free.  If you are near to an Apple Store, make a reservation to visit a Genius, and have your computer checked out.

  • Macbook pro retina, too much ram used & performance problems

    i've recently got my macbook pro with retina display, 128 gb i5 intel 2.6Hz processor with 8gb memory, OS Yosemite 10.10.1. problems began to appear the very first moment i've turned it on: at the last step of profile creation (the step where you choose a name and a password of your profile), after i've filled all the fields and clicked some button to proceed, my macbook refused to boot and froze. i've restarted the computer and then it booted just fine. Then new problems appeared: after installing some apps from mac app store, they wouldn't load the first time i open them, - i had to close them and reopen. Once again, this issue wasn't appearing with every app - only with a few ones. I assumed that this was a software issue which will disappear after i update. And well, i didn't observe this problem ever since i've updated the OS. However, i can't be sure that it disappeared.
    Also, i monitor RAM consumption using the Memory Clean app. there are like only 3.60 gb free space out of 8. is it ok?
    so, what i am asking: should i take my macbook to a store to get it fixed or this problem is just a software and not a hardware issue and i just have to wait?
    Thanks

    @_Macuser wrote:
    Also, i monitor RAM consumption using the Memory Clean app. there are like only 3.60 gb free space out of 8. is it ok?
    That is normal.  The Mavericks and Yosemite OSXs use as much RAM as is available in order to increase efficiency.. The parameter that you should monitor is 'pressure', not the amount.  If it is GREEN, you are operating within acceptable limits.  If there is a color change, then more RAM may be required or there may be other issues that may need attention.
    so, what i am asking: should i take my macbook to a store to get it fixed or this problem is just a software and not a hardware issue and i just have to wait?
    Since you have a new MBP, your best option is an appointment at an Apple store genius bar and have them sort out the issues for you.  Your MBP has a warranty, use it.
    Ciao.

  • MacBook Pro Sound Card issue

    Hello everyone,
    I own a Early June 2011 15" MacBook Pro to assist me in my work as an audio engineer.
    In spite of some Airoport card/cable issues the MacBook is doing it's job better than I could've wished for,
    but at the moment (just a couple of months out of warranty) I'm having an issue;
    The audio coming out of the mini jack output is very distorted and not usably.
    It all happened after an evening working in a studio:
    The connected minijack cable was accidentally pulled out very rough and this activated the digital output option on the MacBook.
    After re connecting the normal mini jack cable everything seemed to work fine and the I've been playing music trough this same output for the rest of the evening.
    The next morning (after the machine has been on sleep mode) the audio, coming out of the minijack output, was very distorted.
    The internal speaker works fine, though.
    I did a lot of research on the internet and tried a couple of things I found there.
    At a certain moment I found a step by step guide to remove some iTunes file in the OSX library.
    After doing this and restarting the machine 1 side of the stereo output seemed oke, but the other was still distorted.
    As soon as I dragged my balance slider around both of the sides were distorted again.
    This proves, though, that it isn't a hardware issue.
    I've tried a combo update and updated my Mac to Mountain Lion but it still isn't solved.
    Any help is much appreciated!
    Karim

    First make sure you are using the latest drivers...
    http://avid.force.com/pkb/articles/en_US/Download/Eleven-Rack-Drivers
    However the latest ones are not yet confirmed as working to OS X 10.10.3 so you may need to wait for an update from Avid....
    Test and see....
    Note: It's always a good idea not to update OS X or Logic Pro until after you have checked if there are working drivers for your external hardware first.. especially, in my personal opinion... in the case of Avid hardware drivers which are know to lag behind in development..

  • Macbook pro sound not working

    It seems that the sound on my macbook pro does not work when watching videos such as those on youtube. Please help.

    Here is YouTube's help page if you have no sound on YouTube videos:
    http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
    Try re-installing Flash player.  I'm assuming at this stage that all your other audio works fine, e.g. CDs, DVDs, system sounds, etc...

  • Macbook Pro Sound not working with HDMi

    Hello, I have an early 2013 Macbook Pro on OS X Yosemite (10.10), 3 GHz Intel Core i7, 8 GB 1600 MHz DDR3. If you need more specifics about my computer, please let me know. I use an external LG monitor and separate external speaker, all connected through HDMI (I connect the speakers to the monitor, and the monitor to the computer using an HDMI cable. I find that sometimes the sound just cuts out sporadically and unpredictably. I'll be playing a game, and all of a sudden there is a pop and no sound thereafter. I have to restart the game in order to get the sound back. Sometimes I'm using Chrome and watching Youtube and the same thing. I'll have to restart the program to get sound back. Other times, I have to restart the entire computer because sound is missing from the entire computer.
    I've tried switching the sound outputs back and forth from "internal" to "external monitor", with no avail. I've also tried plugging in my earphones (and the sound works), and unplugging them, and the external speaker sound still won't work. After a program or sometimes computer full restart, then the sound will work fine. What can possibly be the cause of this?
    Thanks!

    go to display, preferences, while the tv is hooked up to the computer. two boxes will come up, one for each screen respectively.
    on the tv that you want to correct, go to color, then calibrate, and then change the colors through that.
    Your tv may also not have the default colors on. you may want to look in your TV's setup menu and make everything go to default so you can start fresh and clean. Some TVs will save setting specific to an input and that would explain the weird colors.

  • Macbook Pro sound sometimes won't work. Took into Apple to be fixed. Still not working.

    I purchased a Macbook Pro in July 2014 so my computer is still new.  There is no damage to it (it has never been dropped and kept in case).  My issue started about a month to month and half ago.  When watching netflix the show will stop and when I try to hit play it comes up as an audio system error. 
    The sound won't work and then a few minutes later it'll turn on, as if it was lagging.  For example I would send an email and try to hit the volume button to get the sound to work and then a little later I will hear the whooshing sound from the email and the sound adjusting sounds from the keys all at once. I followed the steps from netflix to fix it which were to uninstall and reinstall silverlight.  That still didn't work.  After a while I took it into Apple and they replaced the switch board.  I got my computer back yesterday and today it is still not working.  I have done everything I can think of to fix it.  What else can I do?

    Return it to the repair shop.  Tell them they didn't fix it.  Take full advantage of your warranty.

  • Macbook Pro Sound becomes mute after upgrading to 10.6.3

    Every thing on my new MBP was working fine, till I just upgraded the firmware from the 10.6.2 to 10.6.3
    Now the sound went mute. No mater what I do, it remains mute.
    I tried every thing, went to system preferences, tried to slide the volume slider, but nothing happenned.
    Please advise how to bring the sound back.
    Do I have to downgrade to 10.6.2 If yes, how can I do it. I am new to Macs. Will i loose my data.

    This is to inform the MacBook Pro users, that I solved my problem only after I run the installation disc of Mac OSX, and downgraded my OS to 10.6
    I would warn other users, that they should take a proper backup, before installing any Apple software updates.
    Though, I am very disappointed that Apple is releasing such updates, without proper testing. It reminded me of Microsoft.

  • Macbook Pro sound not working in windows XP

    I have a macbook pro and recently installed bootcamp/windows xp. Everything works fine in both windows xp and mac os x, except that I have no sound in windows xp. I get the sound on startup that normally plays, and audio plays fine in OS X, but when i run windows, it doesn't detect any audio device (i tried using both headphones as well as the onboard speakers that come with the computer).
    Any suggestions?

    Reli,
    Did you install the drivers from the drivers disc you (hopefully) created during the Bootcamp install? These contain the drivers for sound & graphics etc...
    I realise you get the startup sounds already, but do you mean the sounds in Windows? Anyway, Windows can be a bit funny about drivers.
    Another thing to check, when in Windows, right click on your My Computer icon, go to properties, then in the new window in one of the tabs - believe it's third one from the left on the bottom row - there should be a device manager button (Sorry, I Don't currently have access to a Windows machine so can't tell you the exact tab name). Open up the device manager. Expand the audio and video devices section (or something like that) and see if the appropriate sound card is listed there - this will indicate if the drivers are installed or not.
    HTH.

  • Macbook Pro sound problem... sometimes....

    My girlfriend has a MBP with a Bootcamp installation with windows XP on it for "windows only" programs.
    Macbook Pro
    15" 2.4Ghz
    2GB ram
    2 partition hard drive (OSX and XP)
    Windows XP SP2
    However, occasionally we have been having problems regarding sound. Unfortunately, I do not know when it started as most of the time the sound is always off. It would either seem to have started when I installed Bootcamp 2.1, or after I got leopard a couple of months back and installed the new drivers, upgrading from the beta.
    I had tried to reinstall the drivers from 2.1, and low an behold it worked, or so I thought. I believe the problem is intermittent, so it didn't actually solve anything. It would seem that the sound always works in Mac OSX, but only occassionaly in Windows. Was thinking of trying to install older drivers, but wanting to hear from the board first.
    2nd problem
    When the lid is closed and windows goes into sleep or something, sometimes when the lid is opened and the sleep is deactivated, the screen will not turn back on and remains blank while the system is running.
    Thanks

    I got help from another forum.
    You have to download the latest driver from realtek.

  • APPLE MACBOOK PRO SOUND BUTTON ISSUE

    Why doesn't my sound button respond on my macbook I have even reset the PRAM

    Sorry man ok so here is the issue sometimes my audio is really weird like the f10 f11 and f12 keys dont work and Sometimes when I put headphones in I cant control the sound using the buttons or the sound icon on the top bar
    there is no red light I have checked the sound preferences I have reset the PRAM what seems to be working is when I slowly insert headphones in and out of the jack I bought this thing mid 2010 so im not covered by apple care and I hate that it costs $19 just to talk to them and I dont feel like spending $700 on a new logic board I bought this to escape my awful microsoft experiences so do you have any other ideas on this sound issue if you do that would be awesome and If I need to post a video of the issue I will thanks
    ALSO im using the macbook pro 13 inch and this seemed to happen after I downloaded some bamboo tablet software

  • MacBook Pro using too much RAM

    I have  15" MacBook Pro, purchased in February, 2013.  It has 2.6 Ghz Intel i7 processor, 8 GB RAM and a 750 GB hard drive.  The HD is about 25% filled, mostly with photos.  It came with Mountain Lion, I upgraded to Mavericks, then to Yosemite.  I go back and forth between Safari and Chrome for my browser.  (I've heard Chrome uses too much memory, but I've found the opposite to be the case for my computer.)  All upgrades went smoothly, no problems.   I love using it, EXCEPT...
    Over the past year, I've thought it was using too much RAM for very simple activities and it slows to a crawl using Aperture or MS Word.  Even when just web browsing, and nothing else open or running, the computer will use 6 to 7 gigs of available RAM.  Using Aperture is so slow it's no longer fun... I wait and wait for the beach ball to go away and it does, eventually (Won't need to worry about Aperture for too much longer, I guess).  I've been thinking about Lightroom to replace Aperture, but I'm worried that I will have similar problems with a new program.  Any suggested solutions?  Thanks!

    Hey danfrompeoria,
    Thanks for the question. If I understand correctly, you are using a lot of memory. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    OS X Yosemite: If your Mac runs slowly
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Plantronics Voyager Pro vs. Macbook Pro sound output

    I just bought the Plantronics Voyager Pro bluetooth headset to use with my iPhone in the car. It works great. As an experiment, I tried pairing it additionally with my 2007 Macbook Pro. I can hear sound output from some apps but not others, for example, I can hear music in iTunes, but not YouTube videos in Safari. It seems like I should be able to hear all sound output, not just some. Any suggestions appreciated.

    The "bug" is specific to sites that stream such as youtube. The sound on my jawbone works with every application including safari but not when I navigate to a website that streams.

  • Why does my Macbook Pro use so much power in sleep?

    Hi everyone, forum newbie here
    My mid 2010 Macbook Pro (13.3" C2D 2.66ghz, 4GB etc) uses a lot of energy during sleep
    It drains between 2-5% per hour, which believe me is a lot. My battery lasts anything from 3-4 hours to 8 ish if I'm using it very little, so to deplete roughly 5% per hour is not that much less than the laptop uses when it's switched on... so what's going on here?
    I'm sure it's asleep all the time, not waking up for whatever reason, the blinking/breathing LED on the front side of the laptop glows and dims so I know it's in sleep mode.
    Can anyone help me? Thankyou!

    Your situation is not unique. Another long thread https://discussions.apple.com/thread/1758587?start=90&tstart=0 suggests that a solution is not yet forthcoming.
    You can, however, partially remedy the situation by (1) making sure your system is not too warm or hot - this really reduces the life of your battery; (2) Keep your unit charged for portions of the day; display quality is better while powered, and battery will keep more of its power; (3) In some cases, keeping your MBP connected to USB cables can leech power from your system; detach all cables before sleeping.
    Of course, this won't solve the problem, but it will improve things. If it's any consolation, many (but not all) Windowz units report the same problem.
    Post here if you have any comments, advice, or even feedback!

Maybe you are looking for

  • Want to become a dedicated Mac person but need convincing GO

    Ok now since i was little i was a windows user and still am to this day, But recently i got a new job and we use 27" Macs and im starting to really want to buy one but here a few things, Seeming i use my windows pc as a server i have a couple hundred

  • BAPI/FM to remove payment block on MIRO Invoice

    I need a BAPI/FM to remove a payment block on a MIRO invoice.  I realize that this has probably been answered before but, due to SDN's search feature, I haven't been able to find an answer. Regards, Davis

  • Opening .CDF files

    Hello, I am trying to open some data processed with Matlab which are stored in a CDF file. Is there a way for opening this files in Labview or Diadem? I spent some time in the forum but could not find any solution; it is estrange because it looks a p

  • Moving some photos between computers

    I have a iMac and a Macbook Air. The iMac has my main iPhoto library. However there are lots of photos on my MacBook also. I now want to copy all the photos from the Macbook to the iMac. 90% of them are probably on the iMac already, so those I don't

  • URGENT: Help to Change Ordered Items

    I'd just made an online order (Order No: W224606857) but want to change items that I ordered.  However, I can't find the order record that I made yesterday by login the Apple ID.  I just can check the order status login by order no and the email....h