My macbook pro started turn off slow after doing the dirk repair

It takes like a minute to turn off. it used to take a second to turn off and I loved it but now it takes a lot longer.all I did was do the "disk repair" and verify the disk. Thanks.

It would help if you mentioned what OS you are using. For 10.6 and under boot from your OS installer disk. Stick the disk in the optical drive slot and reboot while holding down the c key. Select Disk Utility from the Utilities menu and run Repair Disk not Repair Permissions. For Lion 10.7 boot while holding down the command-r keys so you boot into the Lion Rocovery disk then select Disk Utilities and ....

Similar Messages

My MacBook Pro screen turns off when I open the lid!

This has been driving me nuts, and also apparently Apple as well.
When my MacBook Pro is connected to a power adapter, if I close the lid it sleeps like a good little Mac. When I open the lid, the display comes on instantly. Then after about a second, it goes black. The LED backlight turns off. I can get it to come on using either of two ways: 1) touch either of the brightness buttons, or 2) remove and replace the power connector.
Now, here is the weird part: it only seems to do it when I am logged in as me. If I login as guest, it doesn't happen. That would seem to imply it is something about my profile that causes it to happen. So I whacked ~/Library/Preferences and it still happened. So where is this particular bit of nastiness hiding?

OK, so I think I solved my issue. It was caused by the system not going to sleep (The screensaver thing was a dead end).
When I ran the console app pmset, I got something like this:
➜ ~ pmset -g assertions
12-06-29 9:11:06 AM EDT
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      1
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
The process that was causing PreventSystemSleep to be 1 was "org.cups.cupsd" which is the print service. So I checked all my printers, one of them was "In Use". When I opened it, there weren't any jobs listed. I went through the options and selected Jobs > Show Everyone's Jobs and sure enough there was a job there. I deleted it and everything seems to work now.
The odd thing is that print job was probably from my other account which didn't seem to have this screen problem. Anyway, I hope this helps anyone out there....

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My macbook pro is running really slow after upgrade to Mavericks

my macbook pro is running really slow after upgrading to Mavericks....any ideas?

OS X Mavericks: If your Mac runs slowly
The above link is not very useful, so if it doesn't help read on.
There are many potential reasons that a Mac may be running slower than expected, but more information is required to begin troubleshooting, much more.
Back up your documents and everything else important to you before proceeding. It is premature to conclude your hard disk is failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

My Macbook Pro started running really slow

This week my Macbook Pro started running super slow, taking ages to open programs and giving me the color wheel alllll the time. I've never had problems like this before! I'm not running many applications or doing anything unusual but it's just running extra slow. Once or twice it has also totally gone to sleep while I was in the middle of using it, and I had to wake it back up. It has also been getting really hot and the battery life seems worse...! This is all new, I'm using my computer just as I always have but it suddenly has issues.
The only thing it has been doing for a while is sometimes the screen will go blue - this either corrects itself within a few seconds or if I close my Macbook and then reopen it, the screen is back to normal. This is very rare though and I don't know if it's related to the slowness problem.
What can I do to fix this??
Mac OS X 10.6.8
2 GHz Intel Core i7
4 GB 133 MHz DDR3
I just ran EtreCheck -
Hardware Information:
    MacBook Pro (15-inch, Early 2011)
    MacBook Pro - model: MacBookPro8,2
    1 2 GHz Intel Core i7 CPU: 4 cores
    4 GB RAM
Video Information:
    AMD Radeon HD 6490M - VRAM: 256 MB
    Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
    Mac OS X 10.6.8 (10K549) - Uptime: 1 day 3:59:13
Disk Information:
    Hitachi HTS725050A9A362 disk0 : (465.76 GB)
        (null) (disk0s1) <not mounted>: 200 MB
        Macintosh HD (disk0s2) / [Startup]: 465.44 GB (235.1 GB free)
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
    Apple, Inc. MacBook Pro
Kernel Extensions:
    com.digidesign.iokit.DigiDal    (8.0.3f1)
    com.paceap.kext.pacesupport.snowleopard    (5.7.2)
Startup Items:
    DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
    M-AudioFastTrack: Path: /Library/StartupItems/M-AudioFastTrack
    PACESupport: Path: /Library/StartupItems/PACESupport
Problem System Launch Daemons:
    [System]    org.samba.winbindd.plist 3rd-Party support link
Launch Daemons:
    [System]    com.adobe.fpsaud.plist 3rd-Party support link
    [System]    com.google.keystone.daemon.plist 3rd-Party support link
    [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
    [System]    org.eyebeam.SelfControl.plist 3rd-Party support link
    [System]    PACESupport.plist 3rd-Party support link
Launch Agents:
    [System]    com.google.keystone.agent.plist 3rd-Party support link
    [System]    com.hp.help.tocgenerator.plist 3rd-Party support link
    [System]    com.m-audio.mobilepremkii.helper.plist 3rd-Party support link
User Launch Agents:
    [not loaded]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    [not loaded]    com.facebook.videochat.[redacted].plist 3rd-Party support link
    [not loaded]    com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
    Flux
    iTunesHelper
    RescueTime
Internet Plug-ins:
    o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    Unity Web Player: Version: UnityPlayer version 3.5.2f2 - SDK 10.6 3rd-Party support link
    RealPlayer Plugin: Version: Unknown
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
    FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    QuickTime Plugin: Version: 7.6.6
    Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
    AdobePDFViewer: Version: 10.1.1 3rd-Party support link
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
    Flash Player 3rd-Party support link
    Growl 3rd-Party support link
    M-AudioFastTrack 3rd-Party support link
    M-Audio MobilePre 3rd-Party support link
Old Applications:
    None
Time Machine:
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU:
         7%    firefox
         3%    WindowServer
         3%    EtreCheck
         2%    hidd
         0%    coreservicesd
Top Processes by Memory:
    397 MB    firefox
    106 MB    mds
    82 MB    WindowServer
    82 MB    Mail
    49 MB    quicklookd
Virtual Memory Information:
    1.04 GB    Free RAM
    1.04 GB    Active RAM
    1.03 GB    Inactive RAM
    907 MB    Wired RAM
    467 MB    Page-ins
    0 B    Page-outs

The startup drive is failing, or there is some other internal hardware fault. The "etrecheck" output is irrelevant.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

My MacBook Pro is running very slow after update to Yosemite

My Macbook pro is running extremely slow after updating to Yosemite. What can I do to solve this problem?

EtreCheck version: 2.1.1 (104)
Report generated 8. dec. 2014 kl. 20.05.45 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 4:2:9
Disk Information: ℹ️
Hitachi HTS545025B9SA02 disk0 : (250,06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.20 GB (195.10 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist [Support]
User Launch Agents: ℹ️
[running] com.spotify.webhelper.plist [Support]
[invalid?] com.zeobit.MacKeeper.Helper.plist [Support]
User Login Items: ℹ️
iTunesHelper Program (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Program (/Applications/Dropbox.app)
Spotify Program (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 [Support]
ViewRightWebPlayer: Version: 2.3.0.4 [Support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions: ℹ️
Extensions: No such file or directory
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      13% mds
      11% WindowServer
      0% fontd
      0% AppleSpell
      0% Dropbox
Top Processes by Memory: ℹ️
228 MB com.apple.WebKit.WebContent
193 MB Safari
112 MB softwareupdated
107 MB Microsoft Word
94 MB Preview
Virtual Memory Information: ℹ️
617 MB Free RAM
1.82 GB Active RAM
869 MB Inactive RAM
724 MB Wired RAM
2.67 GB Page-ins
74 KB Page-outs
Diagnostics Information: ℹ️
Dec 8, 2014, 04:04:13 PM Self test - passed

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

My one day old MacBook pro just turned off and it won't come back on either through mains or battery power

My one day old MacBook pro just turned off and it won't come back on either through mains or battery power it's as if the unit is completely dead. Even with the mains plugged in there is no green or orange light to say its charging or full charged. The battery was fully charged anyway seconds before the screen went off.

When you say no green or orange light are you refering to the little led on the magsafe connector? That could mean either the charger/cable are bad or the circuitry in the MBP is faulty. Since this is a brand new MBP best bet is to take it back to an Apple Retail store and have the genius bar staff take a look. They can determine if it needs to be reparired or replaced.

Macbook Pro suddenly turned off, not charging either.

My Macbook Pro suddenly turned off last night. I've tried all the troubleshoots listed in the user manual. Thought it was just batt low but it would not even charge, neither the battery sign located on the left side wouldn't show any sign/blink/color. Please help me, it's just 8-month old and Im not sure what could be the reason of this problem. PLEASE AND THANK YOU

MonicaDCC wrote:
Hi i'm sorry but what is SMC?
System Management Controller
The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs. These functions include:
Responding to presses of the power button
Responding to display lid opening and closing on portable Macs
Battery management
Thermal management
The SMS (Sudden Motion Sensor)
Ambient light sensing
Keyboard backlighting
Status Indicator Light (SIL) management
Battery status indicator lights
Selecting an external (instead of internal) video source for some iMac displays
You didn't click the link to Apple's instructions and explanation, why?
Here it is again, click, read, follow the links for your machine and the instructions how to perform or take your machine in for service.
https://support.apple.com/kb/HT3964

I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

Contact support by web chat or phone to reset activations.
Mylenium

Macbook Pro suddenly turns off by itself while on the internet or Skype

While on Skype or internet my MacBook Pro suddently turns off and has to be rebooted. This is while the computer is plugged in to external power source. Any suggestions?

Any suggestions?
To get the audience of MacBook Pro users, try posting in the appropriate MacBook Pro discussion area.

My MacBook Pro started running very slow. I did disk utility/repair

My MacBook Pro started running very slow. I did disk utility/repair and it helped but still very slow. Repair gave me this message, "SUID file 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent has been modified and will not be repaired." Any suggestions on this message and/or what else I can do to get my computer back to the way it used to run? Thank you!

It says 199.15 GB free of 499.25 GB. Can I remove the Remote Management program to solve the other unrepairable problem?

Macbook pro 17 turns off when switching to high performance mode

Hi guys!
My 2009 Macbook pro 17 turns off and goes dead when switching to "high performance" graphics in the energy saver controll panel.
This happens also when the battery is 100% charged. i must reconnect powersupply to reboot.
The battery is new, from june this year.

Aardal87 wrote:
I have just re installed the system. and the problem continues.
I guess ur solution isnt worth trying on a fresh system install?
It will not do any harm trying it but you are probably correct in these circumstances.
If the symptoms are consistent, then a savvy technician at an Apple store genius bar should be able to define the problem.
Ciao.

MacBook pro fails to wake up after opening the lid

My MacBook pro screen lights up briefly after opening the lid from a sleeping status. However the screen then turns off and the only remedy is to force a shutdown by holding down the on/off button and then restarting it.

My "nearest" local Apple Store is almost 40 km far from where I live...It's clearly a softwere problem and yes, It's not new for Apple. I hope they consider this annoying problem and fix it as soon as possible. I also noticed that doing a "Verify Disk" via Disk Utility an error accours by checking the free space of the HDD. It's suggested to repair the disk immediatly (bold red alarm pops out ) rebooting the system and using the tools under the CMD-R startup. By the way, ignoring the problem and by just verify the disk again, the error maigcally disapper into the void...that's weird !
I hope somethings will come out, I'm really, really annoyed by this problem and i don't want to run in some data loss or HDD failure because i really need my Mac for work (as, i think, most of us )!
Claudio

Macbook pro (2010) Powers off everytime i close the screen.HELP PLEASE

Macbook pro (2010) Powers off everytime i close the screen, used to go into hibernate but now it powers off....HELP PLEASE
Computer is just over a year old and this is the first problem i have ever had, Nothing has changed in the power saver settings, and its getting frustrating everytime i go to use it i need to power it on and it always seems that it takes awhile before it finnaly realizes to turn on when pushing the button.

So apparntly it is not turning off, however the screen is just not coming back on once i open the lid. so i push the power button, it shuts down then i press it again and it restarts. software or hardware error?

My macbook pro started turn off slow after doing the dirk repair

Similar Messages

Maybe you are looking for