My Macbook Pro suddenly lost majority of my 121GB disk space

All of a sudden my Pro started notifying me that my disk space was almost full and I know for sure that I had more than 80GB available. So now I only have 8GB disk space left out of 121GB and I have absolutely no idea where all that space has gone to??
When I checked my Mac it says 42.74GB of storage is "Other". Something HUGE must have downloaded accidentally but I can't find it anywhere on my mac pro.
What should I do?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
          iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Similar Messages

  • My MacBook Pro suddenly lost one of my printers

    My MacBook Pro suddenly can't find one of my Epson printers.  It is brand-new, has Mavericks installed, and was printing just fine before.

    Hello exLuddite,
    It sounds like all but 1 of the printers is being recognized on the computer you have 10.9 installed on. I recommed this troubleshooting from the article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How to migrate from my old MacBook Pro to a new one with less disk space and an external hard drive?

    I have just bought a new MacBook Pro and an external hard drive.
    Yet I have problems migrating data from my old MacBook Pro (more internal disk space with around 500 GB data) to my new one (internal disk space less than 500 GB). 
    I have connected all 3 devices but it seems the Migration Assistant does not have an option for us to select to migrate to an external hard drive.
    Any other way to do it?
    Kindly help me.  Thanks.

    For your situation, Target disk mode may be the most efficient method:
    http://support.apple.com/kb/ht1661
    Ciao.

  • MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

    I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
    My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
    Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
    Thank you.

    You have at least 3 different ways to show the project library:
    1) Go to WIndow->Show Project Library
    2) Click the button in bottom left of your window: 
    3) Hit the keyboard shortcut (Command-0)
    The project library will be shown, occupying the area where the timeline usually is.
    Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

  • Macbook Pro suddenly will not connect to the internet via ethernet cable.

    I know this is a long shot... but I figured I would give it a try.
    My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
    I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
    I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
    When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
    I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue.  Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
    I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • Why is my MacBook Pro suddenly running as slow as syrup?

    Hello,
    I read some of the replies to the other posts about MacBook pro suddenly running slowly, and I am about to try a repair and do a few other things, but I was wondering if anyone could tell me if my etrecheck.com details offer a hint as to why it's running so slowly. I have pasted them below.
    A few things to note:
    1. I have since turned off Time Machine backup on this computer, and I am just about to uninstall the app BackTrack and all the LogMeIn crap.
    2. I repair permissions on this machine at least twice a month, sometimes more often.
    2. For the past month or so, my computer has been making this desperate sounding single beep after I log into my user account and after all the startup stuff is done. I read somewhere that it means my computer is about to die, but figured I would throw it out there.
    I appreciate any insight.
    Thanks,
    Jen
    Hardware Information:
        MacBook Pro (13-inch, Early 2011)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2 cores
        4 GB RAM
    Video Information:
        Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
        OS X 10.9.2 (13C64) - Uptime: 0 days 17:10:27
    Disk Information:
        ST9320325ASG disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted>: 209.7 MB
            Macintosh HD (disk0s2) / [Startup]: 319.21 GB (168.57 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        HL-DT-ST DVDRW  GS31N 
    USB Information:
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
        Apple Inc. thunderbolt_bus
    Kernel Extensions:
        com.logmein.driver.LogMeInSoundDriver    (1.0.3 - SDK 10.5)
    Launch Daemons:
        [System]    com.adobe.fpsaud.plist 3rd-Party support link
        [System]    com.google.keystone.daemon.plist 3rd-Party support link
        [System]    com.logmein.logmeinblanker.plist 3rd-Party support link
        [System]    com.logmein.logmeinserver.plist 3rd-Party support link
        [System]    com.logmein.raupdate.plist 3rd-Party support link
        [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
        [System]    com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
        [System]    com.logmein.LMILaunchAgentFixer.plist 3rd-Party support link
        [System]    com.logmein.logmeingui.plist 3rd-Party support link
        [System]    com.logmein.logmeinguiagent.plist 3rd-Party support link
        [System]    com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
        [System]    com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
        [not loaded]    com.adobe.ARM.[...].plist 3rd-Party support link
        [not loaded]    com.nds.pcshow.plist 3rd-Party support link
        [not loaded]    com.nds.pcshow.uninstall.plist 3rd-Party support link
    User Login Items:
        BackTrackBA
        AdobeResourceSynchronizer
    Internet Plug-ins:
        Default Browser: Version: 537 - SDK 10.9
        AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
        FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
        LogMeIn: Version: 1.0.935 - SDK 10.7 3rd-Party support link
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
        Flash Player: Version: 12.0.0.77 - SDK 10.6 Outdated! Update
        LogMeInSafari32: Version: 1.0.935 - SDK 10.7 3rd-Party support link
        googletalkbrowserplugin: Version: 3.8.1.9672 3rd-Party support link
        npgtpo3dautoplugin: Version: 0.1.44.21 - SDK 10.5 3rd-Party support link
        AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
        WidevineMediaOptimizer: Version: (null) 3rd-Party support link
        JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Audio Plug-ins:
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
        Picasa: Version: 1.0 3rd-Party support link
    3rd Party Preference Panes:
        Flash Player  3rd-Party support link
        Java  3rd-Party support link
    Old Applications:
        /Library/Application Support/Microsoft/MERP2.0
            Microsoft Error Reporting:    Version: 2.2.9 - SDK 10.4 3rd-Party support link
            Microsoft Ship Asserts:    Version: 1.1.4 - SDK 10.4 3rd-Party support link
        Solver:    Version: 1.0 - SDK 10.5 3rd-Party support link
            /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
        SLLauncher:    Version: 1.0 - SDK 10.5 3rd-Party support link
            /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
        /Applications/Microsoft Office 2011/Office
            Open XML for Excel:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Office Setup Assistant:    Version: 14.3.3 - SDK 10.5 3rd-Party support link
            Microsoft Alerts Daemon:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            SyncServicesAgent:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Database Daemon:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Graph:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Database Utility:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Office Reminders:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Upload Center:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            My Day:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Chart Converter:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Clip Gallery:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        /Applications/Microsoft Office 2011
            Microsoft PowerPoint:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Excel:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Outlook:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Word:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            Microsoft Document Connection:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Language Register:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
            /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
        Aimersoft Helper Compact:    Version: 2.2.5.6 - SDK 10.5 3rd-Party support link
            /Users/[redacted]/Library/Application Support/Helper/Aimersoft Helper Compact.app
        Microsoft AutoUpdate:    Version: 2.3.6 - SDK 10.4 3rd-Party support link
            /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
        Aimersoft DVD Ripper:    Version: 2.6.2 - SDK 10.5 3rd-Party support link
        Spotify:    Version: 0.8.5.1333.g822e0de8 - SDK 10.5 3rd-Party support link
    Time Machine:
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 297.29 GB Disk used: 140.30 GB
        Destinations:
            kathmere [Network] (Last used)
            Total size: 2 
            Total number of backups: 43
            Oldest backup: 2014-02-28 23:49:13 +0000
            Last backup: 2014-04-12 04:35:47 +0000
            Size of backup disk: Excellent
                Backup size 2  > (Disk size 297.29 GB X 3)
        Time Machine details may not be accurate.
        All volumes being backed up may not be listed.
    Top Processes by CPU:
             4%    WindowServer
             2%    EtreCheck
             1%    hidd
             1%    systemstatsd
             0%    configd
    Top Processes by Memory:
        266 MB    firefox
        143 MB    com.apple.IconServicesAgent
        127 MB    softwareupdated
        102 MB    mds_stores
        74 MB    mds
    Virtual Memory Information:
        1.22 GB    Free RAM
        1.44 GB    Active RAM
        332 MB    Inactive RAM
        1.02 GB    Wired RAM
        795 MB    Page-ins
        288 KB    Page-outs

    OS X Mavericks: If your Mac runs slowly?
    Startup in Safe Mode
    http://support.apple.com/kb/PH14204
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • My Macbook Pro suddenly became really slow

    3 Days ago my Macbook Pro suddenly became really slow. I can't run anything without my computer freezing. I've had my Macbook Pro since mid-2012 (21 months). The first thing i did was check my activity monitor, which said that I was apparently using 4 GB (half) of my Macbook Pro's RAM, even though nothing was running. The process that was using the most RAM was kernal.task, which was only around 600mb of RAM. All the processes RAM amounts only added up to around 1 GB,  not four. I can't even open safari without my computer freezing. The amount of RAM being "used" on my computer slowly started to increase, even though nothing was running, until it got to all 8 GB being used. When i restart my computer, it goes back to 4 GB and starts to rise again. My processor, on the other hand, is doing nothing. Its acting normally. How do i get my computer back to its usual performance?
    Hardware Specifications
    13-inch Mid-2012 Macbook Pro
    Processor: 2.9 GHz Intel Core i7
    Memory: 8 GB 1600 MHz DDR3
    Graphics: Intel HD Graphics 4000 1024 MB
    750 GB HDD
    OS X 10.9.2

    Since you are using Mavericks OS, the amount of RAM being used is inconsequential but the 'pressure' is.  If green is showing then the RAM usage is normal.  This is a change fro prior OSX's.
    The usual problem will lie with the HDD,  It may be too full or needs to be repaired or replaced.  Go into OSX recovery and select from the 4 option menu Disk Utility.  Choose First Aid and run Verify and Repair.
    (Start the MBP with the OPTION key down and select the recovery partition)
    If that does not solve the problem, try a safe boot:
    http://support.apple.com/kb/ht1564
    If the MBP responds 'normally' that usually indicates that there is a third part application that is causing the problem.  They have to bedeleted and reinstalled in a systematic way so that you can identify the culprit.
    Ciao.

  • My Macbook Pro i7 lost wifi connection

    Hi, my Macbook Pro i7 lost wifi connection. I don't know why, but my connection is lost every time. I've other PC, tablets etc. (Windows, iPhone, iPad) and all is ok. Only Macbook Pro i7 have this problem. Some help?

    Well if then, if it is two weeks old, I suggest a trip to the Genius Bar at your Apple Store... it may well be a warranty issue.
    I am sorry I was not able to be any help at all besides WANTING to!
    Were you running your other wireless machines at the SAME time? And you had nobody in the house using  mixers (for drinks or cake and cookie batter) or hair dryers? Clothes dryers....?
    While thinking of Brasil and weather- I saw on our public TV station a few months ago- a story about a fishing boat, I think south of Rio de Janeiro, who encountered a hurricane- and only one fellow lived. Ouch!
    Report back if you can save the link to the page, or the emails of the answers, to tell what the Apple store said...

  • My Macbook Pro 13" lost Internet connection last night. Why?

    My Macbook Pro 13" lost Internet connection last night. It's still out today, but my mother's Windows machine still gets it just fine. What happened to my Mac? The folks at Comcast told me it's a problem for Apple to fix. I'm hoping someone here can give me some insight.

    see if there is anything for you.
    http://support.apple.com/kb/TS1920

  • My macbook pro suddenly won't send emails.

    They sit in my outbox. Please can you help.
    This suddenly happened this morning when I tried to send a video.  I cancelled that message bit it froze the whole thing although one message seems to have got through.

    krowl13 wrote:
    My Macbook Pro suddenly won't read my 750GB WD Elements Hard drive.
    If I'm not mistaken, this drive is bus-powered. MBPs seem to have frequent problems with bus-powered drives, probably because they don't provide enough power on the USB bus.
    In disk utility though it says it is a 2.2TB hard drive
    It is possible that the drive or USB interface are damaged. However, it is too early to decide. You need to connect the drive to a desktop machine (Mac or PC), or provide more power to the drive (with a power supply, if the drive accepts it, or a USB Y-cable and a USB power supply, rated 1A or more).

  • My Macbook Pro has lost the keyboard lighting - only 18 months old

    Macbook Pro has lost keyboard lighing - only 18 months old. I am an O.A.P. Is there an enexpensive way of fixing this?

    Have you tryed a SMC reset.
    http://support.apple.com/kb/HT3964
    Follow instructions for a battery you you should not remove yourself

  • My MacBook Pro just lost the ability to cut

    My MacBook Pro just lost the ability to cut & paste as well as drag & drop. Any thoughts as to how this could simply stop working? Or how to fix?

    Run the Network Diagnostics assistant. How far do you get?

  • My MacBook Pro suddenly became very slow, cursor responding slowely

    My MacBook Pro suddenly became very slow, cursor responding slowely

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD  com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

    The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

    I advise to reply to the one you want to reply to.
    You have had good information here. I will not repeat that here.
    I would like to add:
    you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
    Akamai is crap software needed or not, Huawei the same.
    It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
    The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
    You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
    Lex

  • Macbook Pro suddenly turned off, not charging either.

    My Macbook Pro suddenly turned off last night. I've tried all the troubleshoots listed in the user manual. Thought it was just batt low but it would not even charge, neither the battery sign located on the left side wouldn't show any sign/blink/color. Please help me, it's just 8-month old and Im not sure what could be the reason of this problem. PLEASE AND THANK YOU

    MonicaDCC wrote:
    Hi i'm sorry but what is  SMC?
    System Management Controller
    The System Management Controller (SMC) is responsible for many  low-level functions on Intel-based Macs.  These functions include:
    Responding to presses of the power button
    Responding to display lid opening and closing on portable Macs
    Battery management
    Thermal management
    The SMS (Sudden Motion Sensor)
    Ambient light sensing
    Keyboard backlighting
    Status Indicator Light (SIL) management
    Battery status indicator lights
    Selecting an external (instead of internal) video source for  some iMac displays
    You didn't click the link to Apple's instructions and explanation, why?
    Here it is again, click, read, follow the links for your machine and the instructions how to perform or take your machine in for service.
    https://support.apple.com/kb/HT3964

Maybe you are looking for

  • APP-FND-01931: Your session is no longer valid or your logon information...

    Hello everyone, I have an instance which was cloned successfully through Rapid clone and after finishing the clone we refreshed the database using the hot backup we have (RMAN). Database is successfully cloned and opened but we are unable to login to

  • Application system preferences crash

    When I go to system preferences and try to set default applications. I get the error "The application system preferences quit unexpectedly. The problem may have been caused by the RCDefaultApp plug-in."

  • Re:Query for items having Stock for a particular warehouse ..!!!

    Dear SAP Members, I need a query to display a list of items having stock by considering all the marketing documents,goods receipt,BOM,Production Order,etc. I have written query like this: SELECT T0.[ItemCode], T0.[ItemName], T1.[ItmsGrpNam],T0.[OnHan

  • Metadata in xml files

    I'm using the XMP toolkit successfully in several graphics files that support metadata.  I'm trying to find a solution for files that don't support it (e.g. Bmp files). One solution is to create an xml file with the same name as the original graphic

  • Capturing Video from a VCR

    I am trying to convert some home videos on VCR. I love PS Elements 8 so I bought Premier Elements 8. I connected my VCR to a PC USB via  a Terratec Grabster 250. The Capture window in Premier Elements appears to have identified the video source (Grab