My MacBook Pro suddenly started freezing. Getting error code -5010D. Any ideas?
Yesterday I noticed my MacBook Pro started freezing up for a few seconds when doing easy tasks, like typing a FB message or browsing. It doesn't seem to be related to anything I'm actually doing, which makes me think it's a hardware problem. I can restart my computer and nothing changes, I can restart in safe mode and same thing, I have run disk utility and it came up with no errors. As the day went on the problem got worse, I started backing up my files to a thumb drive and it was takin forever! I was moving about 45GBs and it was going to take 6 - 8 hours. I was just going to leave it transferring over night but when I set my computer down it apparently got unplugged. No big deal, except now the same 45GBs says it is going to take 14 days. My computer is on it's way out fast! I transferred just the important stuff and ran the hardware test on restart (cmd + r). It shoots back the error code 5010D. I don't know what this is for and can't seem to find anything helpful online. I am currently reinstalling Mavericks after a hard drive wipe, but it's been running for over three hours and it's not even close to being done. I don't think it is a software problem because even after a full format, it's still running slow. I just want to know what piece of hardware I need to replace. Any help would be greatly appreciated.
A little Googling seems to indicate a hard drive problem, which sounds right given the symptoms you're seeing. Make sure you've gotten a good backup of everything. The good news is hard drives are cheap and easy to install. You can look up the procedure for your machine at ifixit.com.
Similar Messages
-
MacBook Pro suddenly started freezing up. Help :)
Problem description:
Two days ago, out of nowhere my MacBook Pro started running super slow and lagging after about every other mouse click, or after typing and hitting backspace.
I haven’t installed anything recently.
I noticed it seemed to be running warmer than normal, I assume because processor was working overtime.
No unusual noise. I could hear the fan running if I listened closely to the ‘hinge’ area where the vents are.
No error messages.
I have reset the PRAM and the SMC
I have also used Disk Utility to verify and correct permissions. No change. still lagging.
EtreCheck version: 2.1.8 (121)
Report generated March 17, 2015 at 8:32:41 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
Empty
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 266
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:56:3
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (235.23 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8 disk2 : (6.84 GB)
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.fpsaud.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[failed] org.tcpdump.chmod_bpf.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.victorpimentel.TVShowsHelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions: ℹ️
Open in Internet Explorer
Searchme [Adware! - Remove]
Slick Savings [Adware! - Remove]
Amazon Shopping Assistant [Adware! - Remove]
Ebay Shopping Assistant [Adware! - Remove]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
TVShows [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 263.65 GB
Destinations:
2 TB Big Mama [Local]
Total size: 2.00 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
4% WindowServer
1% loginwindow
1% mdworker
0% AdobeCrashDaemon
0% cloudpaird
Top Processes by Memory: ℹ️
263 MB com.apple.WebKit.WebContent
133 MB Finder
103 MB Safari
94 MB Creative Cloud
73 MB WindowServer
Virtual Memory Information: ℹ️
217 MB Free RAM
1.79 GB Active RAM
1.57 GB Inactive RAM
713 MB Wired RAM
1.40 GB Page-ins
20 KB Page-outs
Diagnostics Information: ℹ️
Mar 17, 2015, 07:25:49 PM Self test - passed
Mar 17, 2015, 12:19:59 PM /Users/[redacted]/Library/Logs/DiagnosticReports/dynamiclinkmanager_2015-03-17- 121959_[redacted].crash
Mar 16, 2015, 04:53:45 PM /Library/Logs/DiagnosticReports/AdobeCrashDaemon_2015-03-16-165345_[redacted].c rash
Mar 16, 2015, 02:41:22 PM /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-03-16- 144122_[redacted].crash
Mar 16, 2015, 02:40:06 PM /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-03-16- 144006_[redacted].crash
Mar 15, 2015, 09:22:45 PM /Library/Logs/DiagnosticReports/Adobe Photoshop CC_2015-03-15-212245_[redacted].hangWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
When sharing through the export media option as pro res 422 i get error code 108
when sharing through the export media option as pro res 422 i get error code 108 and message saying could not complete because an error occurred when encoding frame 3297 - error 108!!!
what is this frame...is it a jpeg file i have imported...how do i locate it... its a 40 minute movie and it will share to dvd just wont let me create a quicktime .mov file... any suggestions.What frame rate is the project? Divide the 3297 by the frame rate to get an approximate location? What are the specs of the media at that location, video and audio?
-
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
iOS 7.02 update made my iPad stay frozen on the appl logo. What's more, a factory update in DFU mode won't work either, I get error code 3194 - any tips on what I should do? It is an iPad2 on iOS 5 something, the one just before Apple removed YouTube...
iOS 7.02 update made my iPad stay frozen on the appl logo. What's more, a factory update in DFU mode won't work either, I get error code 3194 - any tips on what I should do? It is an iPad2 on iOS 5 something, the one just before Apple removed YouTube...
-
I have 3 downloads from yesterday that I receive this error code. Any ideas?
Thank you!I may have stumbled upon something that could help. A type of "detour" around the problem.
I just started experiencing this problem a few days ago. Anytime I'd try to download a song/video/movie, I would get the message, "Unable to check for available downloads. The network connection was reset".
So, instead of selecting "Check for Available Downloads" under "Advanced" menu...
I logged into "My Account" page in itunes. If there are available downloads it comes up at the top of the page with the option button "Download Now". When I select that -- it downloads immediately.
Can't promise it will work every time. But it's worked for me so far. Good luck... -
HT4528 my i phone four will not re-set it keeps giving me error code 1611 any ideas
my i phone four will not re-set it keeps giving me error code 1611 any ideas?
Turned out that I had to delete the password first before I could change it.
That's the first time I ever had to do that.
In the past it would just accept the password that I entered when asked for it.
Now I will remember - i hope! :) -
Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?
Hi bdtcop,
I understand that you are experiencing an issue with AirPrint. Here is an article for you with some troubleshooting steps that may be helpful for resolving this issue:
About AirPrint
http://support.apple.com/kb/ht4356
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
i tried to do a software update on my iphone 3gs comes up with an unknown error message code 1015
any ideas?See this post:
TS3694 Trying to restore and update my iphone 3, the system tells me 1015 error What can I do? -
Macbook Pro suddenly started running very slow
Hello All,
My Macbook Pro is running very slow for the past 2 days. Did disk repair, Erasing free space, deleted a lot of unwanted files and also restarting my machine multiple times. Kindly suggest a solution for my problem. Please find my ETRE check details below,
EtreCheck version: 1.9.15 (52)
Report generated September 1, 2014 at 11:21:27 PM GMT+10
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:8:46
Disk Information: ?
TOSHIBA MK3265GSXF disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (69.49 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5970H
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Startup Items: ?
EyeConnect: Path: /Library/StartupItems/EyeConnect
Problem System Launch Agents: ?
[loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.parallels.desktop.launchdaemon.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[failed] com.tvmobili.tvmobilisvcd.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.canon.MFManager.plist Support
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ReceiverHelper.plist Support
[running] com.citrix.ServiceRecords.plist Support
[loaded] com.google.keystone.agent.plist Support
[failed] com.parallels.desktop.launch.plist Support
[loaded] com.parallels.DesktopControlAgent.plist Support
[running] com.parallels.vm.prl_pcproxy.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[failed] com.tvmobili.artwork.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items: ?
iTunesHelper
Dropbox
SwitchResX Daemon
Android File Transfer Agent
Google Chrome
Actions Server
Content Manager Assistant
Internet Plug-ins: ?
LogitechHarmony: Version: 1.0.0.1 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.6r636 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Picasa: Version: 1.0 Support
3rd Party Preference Panes: ?
Application Enhancer Support
EyeConnect
Flash Player Support
Paragon NTFS for Mac ® OS X Support
Time Machine: ?
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 232.58 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 2 TB
Total number of backups: 12
Oldest backup: 2014-02-26 14:51:47 +0000
Last backup: 2014-07-22 12:36:09 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
10% CCleaner
7% Safari
4% WindowServer
2% Finder
2% prl_disp_service
Top Processes by Memory: ?
123 MB com.apple.IconServicesAgent
98 MB Safari
82 MB EyeConnect
82 MB CCleaner
74 MB Finder
Virtual Memory Information: ?
4.95 GB Free RAM
1.48 GB Active RAM
346 MB Inactive RAM
1.23 GB Wired RAM
317 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
MacBook Pro suddenly started running really slowly.
I have a:
MacBook Pro 13", mid 2012
2.5 GHz Intel Core i5
4GB 1600 MHz DDR3
Macintosh HD
OS X Version 10.9.4
2 days ago I had about 10 tabs on Chrome, a few word documents and about 5 large PDFs open when suddenly my computer got really slow (I've had similar amounts open before and it's never been an issue). I shut everything down and restarted but it has been slow ever since.
I'm not great with computers but from reading online forums I booted into safe mode and ran Disk Repair and Repaired Permissions but doesn't seem to have done much. I also downloaded and installed OS X Mavericks (which took a full day) but has made little difference. It seems slightly faster than went it first started but not sure if it is.
As I say, I'm not great with computers so any help would be good.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe modeand log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. It will be slow, but there should be no beachballing. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
My MacBook Pro suddenly started running slow
Hi,
My MacBook Pro started running extremely slow a couple of days ago. I tried to search for help and found this forum where people had the same problem. I see that people are advised to check with etrecheck software and post it here to have further instructions. So I did mine and below are my results. I have opened the back of my laptop, cleaned up everything including the dirty fan and reseated the hard drive (which I had problem with loose cable in the past). It seems to fix the slow problem at the moment but the problem keeps appearing once in a while. So I hope someone could help me out. Thanks a lot in advance.
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:10:41
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (232.89 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) / [Startup]: 232.57 GB (67.16 GB free)
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Kernel Extensions:
[not loaded] com.Immersion.driver.ImmersionForceFeedback (1.0.7) Support
[not loaded] com.acard.driver.ACard6280ATA (1.0.5) Support
[not loaded] com.acard.driver.ACard62xxM (2.0.6) Support
[not loaded] com.acard.driver.ACard67162 (2.0.3) Support
[not loaded] com.acard.driver.ACard671xSCSI (2.0.1) Support
[not loaded] com.acard.driver.ACard6885M (2.0.6) Support
[not loaded] com.acard.driver.ACard68xxM (2.0.5) Support
[kext loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.logitech.driver.LogitechForceFeedback (1.0.3) Support
Startup Items:
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
MATLABLmgr: Path: /Library/StartupItems/MATLABLmgr
Problem System Launch Daemons:
[not loaded] org.samba.winbindd.plist Support
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.google.keystone.daemon.plist Support
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[running] com.spotify.webhelper.plist Support
[failed] com.zeobit.MacKeeper.Helper Support
User Login Items:
MacShield
iTunesHelper
QuickTime Player 7
Mail
Dropbox
ExpanderDaemon
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.3.6.5 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
QuickTime Plugin: Version: 7.6.6
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
DivXBrowserPlugin: Version: 2.0 Support
o1dbrowserplugin: Version: 5.3.1.18536 Support
Google Earth Web Plug-in: Version: 7.1 Support
googletalkbrowserplugin: Version: 5.3.1.18536 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.5 Support
WebEx: Version: 1.0 Support
3rd Party Preference Panes:
DivX Support
Flash Player Support
Flip4Mac WMV Support
TeXDistPrefPane Support
Top Processes by CPU:
65% mdworker
1% hidd
1% WindowServer
1% Safari
0% fontd
Top Processes by Memory:
184 MB Safari
111 MB WebProcess
82 MB Dropbox
66 MB Mail
41 MB PubSubAgent
Virtual Memory Information:
2.40 GB Free RAM
776 MB Active RAM
219 MB Inactive RAM
391 MB Wired RAM
177 MB Page-ins
0 B Page-outsHi dippypants and dominic23,
Thanks for your help. I followed dippypants' advice and checked the Activity Monitor. Most of the processess that occupy my CPU and memory are Safari and Safari Web Content. Sometimes when these go down to low, I still have the same problem with computer running super slow.
I then followed dominic23's advice to look for MacKeeper not only in Applications but my whole laptop but I could not find it any where. Yet it still shows when I do the etrecheck. Do you guys think I might have some malware problem?
Thanks! Any help is much appreciated.
Below is the latest check using etrecheck software.
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:12:7
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (232.89 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) / [Startup]: 232.57 GB (67.07 GB free)
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Kernel Extensions:
[not loaded] com.Immersion.driver.ImmersionForceFeedback (1.0.7) Support
[not loaded] com.acard.driver.ACard6280ATA (1.0.5) Support
[not loaded] com.acard.driver.ACard62xxM (2.0.6) Support
[not loaded] com.acard.driver.ACard67162 (2.0.3) Support
[not loaded] com.acard.driver.ACard671xSCSI (2.0.1) Support
[not loaded] com.acard.driver.ACard6885M (2.0.6) Support
[not loaded] com.acard.driver.ACard68xxM (2.0.5) Support
[kext loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.logitech.driver.LogitechForceFeedback (1.0.3) Support
Startup Items:
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
MATLABLmgr: Path: /Library/StartupItems/MATLABLmgr
Problem System Launch Daemons:
[not loaded] org.samba.winbindd.plist Support
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.google.keystone.daemon.plist Support
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[running] com.spotify.webhelper.plist Support
[failed] com.zeobit.MacKeeper.Helper Support
User Login Items:
MacShield
iTunesHelper
QuickTime Player 7
Mail
Dropbox
ExpanderDaemon
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.3.6.5 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
QuickTime Plugin: Version: 7.6.6
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
DivXBrowserPlugin: Version: 2.0 Support
o1dbrowserplugin: Version: 5.3.1.18536 Support
Google Earth Web Plug-in: Version: 7.1 Support
googletalkbrowserplugin: Version: 5.3.1.18536 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.5 Support
WebEx: Version: 1.0 Support
3rd Party Preference Panes:
DivX Support
Flash Player Support
Flip4Mac WMV Support
TeXDistPrefPane Support
Top Processes by CPU:
44% Finder
22% Mail
2% WindowServer
2% hidd
0% Activity Monitor
Top Processes by Memory:
246 MB Safari
147 MB Microsoft Word
115 MB WebProcess
98 MB Mail
82 MB Dropbox
Virtual Memory Information:
2.26 GB Free RAM
999 MB Active RAM
124 MB Inactive RAM
403 MB Wired RAM
238 MB Page-ins
0 B Page-outs -
My Macbook Pro suddenly started running really slowly
I've already restarted multiple times. I've reset PRAM. I've reset SMD. I've restarted in safe mode. I've attached the etre report below.
EtreCheck version: 2.0.6 (91)
Report generated October 19, 2014 9:01:55 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:20:59
Disk Information: ℹ️
APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 749.30 GB (296.71 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.25 - SDK 10.6) Support
[not loaded] com.prolific.driver.PL2303 (1.5.0 - SDK 10.7) Support
[not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.25 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.25 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.25 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.25 - SDK 10.6) Support
Startup Items: ℹ️
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
PKard: Path: /Library/StartupItems/PKard
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.thursby.pkard.tokendagent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[invalid?] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.0.0 Support
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User Internet Plug-ins: ℹ️
ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
Conduit Search for Safari (Disabled)
Searchme
searchExt-1
SlickSavings
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 749.30 GB Disk used: 452.59 GB
Destinations:
EXT HD_Melinda [Local]
Total size: 999.86 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 452.59 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% PluginProcess
1% Safari
1% WebProcess
0% NETGEARGenieDaemon
Top Processes by Memory: ℹ️
206 MB Safari
146 MB WebProcess
77 MB mds
60 MB PluginProcess
60 MB Finder
Virtual Memory Information: ℹ️
5.66 GB Free RAM
1.36 GB Active RAM
277 MB Inactive RAM
1.29 GB Wired RAM
277 MB Page-ins
0 B Page-outsPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. It will be slow, but there should be no beachballing. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Macbook Pro suddenly started running slow
I need some help ASAP! I use my Macbook Pro for recording and other business and can not have it running this slow. I hope this EtreCheck helps solve my problems and can speed up my MacBook pro again, thanks in advance for your time! Have a great day to all!
EtreCheck version: 1.9.15 (52)
Report generated September 23, 2014 at 11:23:38 PM EDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 0:16:40
Disk Information: ?
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (496.72 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.digidesign.iokit.DigiDal (9.0f4) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.master (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.7.2) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.7.2) Support
[loaded] tc.tctechnologies.driver.PaeFireStudio (4.0.0 14255 - SDK 10.0) Support
Startup Items: ?
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
PACESupport: Path: /Library/StartupItems/PACESupport
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
[loaded] tc.tctechnologies.PaeFireStudio.plist Support
Launch Agents: ?
[running] com.canon.MFManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid] com.oracle.java.Java-Updater.plist
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ?
iTunesHelper
Dropbox
AdobeResourceSynchronizer
EvernoteHelper
Android File Transfer Agent
Internet Plug-ins: ?
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Safari Extensions: ?
AdBlock
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
TeXDistPrefPane Support
Tuxera NTFS Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
3% WindowServer
2% mds
0% Google Chrome
0% imagent
Top Processes by Memory: ?
82 MB Google Chrome
74 MB Dropbox
66 MB Finder
49 MB mds_stores
49 MB ocspd
Virtual Memory Information: ?
5.81 GB Free RAM
1.30 GB Active RAM
201 MB Inactive RAM
718 MB Wired RAM
335 MB Page-ins
0 B Page-outsHere are about 60 lines from the log when I was web browsing, typing this message, and switching between Safari and Google Chrome.
10/1/14 12:48:27.259 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:48:50.348 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:51:00.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=2531[ksadmin] final status 0x0, allowing (remove VALID) page
10/1/14 12:51:13.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=2538[ksadmin] final status 0x0, allowing (remove VALID) page
10/1/14 12:51:30.464 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:51:35.752 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:53:29.817 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:53:32.852 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:55:18.317 AM com.apple.WebKit.Networking[276]: CFNetwork SSLHandshake failed (-9806)
10/1/14 12:55:18.319 AM com.apple.WebKit.Networking[276]: CFNetwork SSLHandshake failed (-9806)
10/1/14 12:57:49.484 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:57:52.480 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:58:14.545 AM Safari[255]: Couldn't contact spell checker for Multilingual
10/1/14 12:58:14.545 AM Safari[255]: Suppressing further spell checker launch failure warnings
10/1/14 12:58:26.671 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:58:26.672 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:58:26.672 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:58:26.672 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:58:26.673 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:59:06.894 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:59:06.895 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:59:06.896 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:59:06.897 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:59:10.595 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 12:59:15.313 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 12:59:15.968 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 1:00:05.318 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:05.318 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:05.319 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:05.319 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:05.320 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:40.103 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:40.104 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:40.104 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:40.105 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:00:40.105 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:01:29.847 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:01:29.848 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:01:29.848 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:01:29.849 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:01:29.849 AM AppleSpell[292]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
10/1/14 1:01:31.401 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 1:01:34.972 AM mds[37]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1586
10/1/14 1:02:54.000 AM kernel[0]: Sandbox: coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Kontakt 4.component
10/1/14 1:02:54.000 AM kernel[0]: Sandbox: coreaudiod(183) deny file-read-data /Library/Audio/Plug-Ins/Components/Melodyne.component
10/1/14 1:02:54.000 AM kernel[0]: Sandbox: coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Melodyne.component/Contents
10/1/14 1:02:54.000 AM kernel[0]: Sandbox: coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Melodyne.component
10/1/14 1:02:54.000 AM kernel[0]: Sandbox: coreaudiod(183) deny file-read-data /Library/Audio/Plug-Ins/Components/Reaktor5.component
10/1/14 1:02:54.000 AM kernel[0]: Sandbox: coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Reaktor5.component/Contents
10/1/14 1:02:54.000 AM kernel[0]: Sandbox: coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Reaktor5.component
10/1/14 1:02:54.713 AM launchctl[2571]: launchctl: Couldn't stat("/Library/LaunchAgents/com.oracle.java.Java-Updater.plist"): No such file or directory
10/1/14 1:02:55.403 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-data /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
10/1/14 1:02:55.408 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component/Contents
10/1/14 1:02:55.412 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
10/1/14 1:02:55.417 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-data /Library/Audio/Plug-Ins/Components/Guitar Rig 4.component
10/1/14 1:02:55.422 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Guitar Rig 4.component/Contents
10/1/14 1:02:55.427 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Guitar Rig 4.component
10/1/14 1:02:55.431 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-data /Library/Audio/Plug-Ins/Components/Kontakt 4.component
10/1/14 1:02:55.436 AM sandboxd[190]: ([183]) coreaudiod(183) deny file-read-metadata /Library/Audio/Plug-Ins/Components/Kontakt 4.component/Contents -
Macbook Pro 2011 battery not charging error code
My Macbook Pro just turned 1 year old and the battery might be defective or dead ( Warranty just passed by ) it originally cam with Snow Leopard but I WEB upgraded to Lion (which was far from being easy ... had alot of crashes and hanging happening)
I have the now infamous battery not charging problem. The OSX status bar shows the battery icon with a 'X' meaning no battery. I think the MacBook is not charging the battery because OSX doesn't see a battery.
Today I just noticed that (IMPORTANT) with the power adapter connected, pressing the battery power level button displays a 5 blinks code. Otherwise with power adaptor not connected, the battery seems even too weak to light up even a single LED".
Even though I do a proper shutdown, it is to note that the MacBook Pro starts right away when I plug the power adaptor. I starts right away without me even pressing the power button.
Yerterday I really though the MacBook Pro was not going to work anymore, it kept abruptly shuting down again and again. I couldn't do any of the work I was supposed to.
I did PRAM and SMC resets and eventually I was able to startup the MacBook Pro and do some work but the battery still remains unavailable.
I have 2 of the same 85 Watt charger ( the first one being from a previous MacBook Pro 2008 --- which is waiting to get a repair ) and both performs the same: not charging.
Maybe the battery discharged beyond the point it can be seen my the MacBook Pro and OSX. Just like car battery, if it get discharges way too much, you won't even see the nominal voltage on the terminals even without any load.
EDIT: just noticed that even though it looks like no battery OSX reports that power source IS BATTERY (in the OSX status top bar )It's like mpg for a car. It depends upon how you drive, the weather, the terrain. "7 hours" doesn't mean anything. Your mileage will vary. If I am not doing anything I see 13 hours. As soon as I start surfing or watching a video it changes. Stop obsessing.
Maybe you are looking for
-
Xmldom.removechild(parent_node,child_node) is not working via UI
I have a proc, in which i have a logic to remove child from the xml node. I have a xml_doc variable pointed to the xml document. Sample xml to explain my issue better: <?xml version="1.0" encoding="UTF-8"?> <oa:stackLayout id="294641" controllerClass
-
Hi, expert My customer has a specific requirement. For AP, use exchange rate type B, for AR use exchange rate type G. The easist way is to set in the document type (Table T003), but this table is cross company code. Here only one company code need i
-
I want to burn a Podcast onto a CD. Is this possible? I brought an audio podcast into iTunes, and now I want to burn it onto a CD but there isn't a "burn" button like there normally is for an audio file. Do I need to convert it somehow? Thanks!
-
Security Update 2008-002--How to Uninstall
I have Leopard 10.5.2 and everything was fine until Sunday, 3/23/08 when I installed this update. Afterwards I have problems starting programs, such as EyeTv, it has a termination/shutdown error, and even a simple Mac startup program to maximize the
-
Is there an Epson RX530 print/scanner driver available for Maverick?
Hi I have an Epson Stylus PHOTO RX530 that worked quite happily under the previous version of Mac OSX until Mavericks came along. I've searched the Epson site that refers the solution may be found on the Apple Support site. No joy. I can't be alone.