My MacBook Pro told me I needed to restart my computer?
..with a little black box that popped up and disabled me from using any buttons or the trackpad. When I restarted it all I got was the white screen and the apple and the spinning spiral of death underneath it. It won't finish booting up. Help!!
Start you computer in safe mode (holding down the shift key while restart) that may help.
Similar Messages
-
Macbook Pro stuck in " you need to restart" mode!
I hope someone can help.
Everytime I turn on my macbook Pro, the apple logo comes on with the spinning
"loading" wheel thingy and bang two seconds onto the boot, the computer crashes with the falling grey screen and the "you need to restart your system by hollding the .. etc"
I cant get out of this mode! I've tried starting from the Leopard disk. I ve reset pram, etc.
Its like the computer never passes the first few seconds of loading.
Any help so much appreciated!
Thanks
AlexisStandard kernel panic. See Mac OS X Kernel Panic FAQ and Resolving Kernel Panics for more details.
-
I can't open FF, without being prompted to reboot. I've tried uninstalling and reinstalling, but get the same prompt to reboot.
Try Safe Mode to get around the loop and see whether it lets you remove just the add-on you want to remove.
http://support.mozilla.com/kb/Safe+Mode -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please
If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard. -
Is it safe to store the downloaded movies from iTunes in my Macbook Pro or do I need to store those separately in an external hard disk ? Please advice.
It will be no better or worse than any other video file and should not be responsible for any system instability. As I alluded to earlier, video takes up a lot of space and you can quickly use up that 200 GB of space. Download a few files to you MBP and see what impact it has. I have a couple of external HDDs dedicated to video files (and backups of same) due to the large file sizes.
If you find that space is getting tight on your MBP, then get an external for the video files and another one to back them up. I have a couple of external HDDs dedicated to video files (and backups of same) due to the large file sizes.
Ciao. -
I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report: 6
Anonymous UUID: 70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.4
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 560.7.21
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.0.8
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 5.0.7
com.apple.driver.AppleUSBXHCI 1.0.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.7f2
com.apple.iokit.IOBluetoothFamily 4.0.7f2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.0.7
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
I have macbook pro A1278 serial number ************** need ping code to unlock
i have macbook pro A1278 serial number *******************
need ping code to unlock Please Find Attached file About Thissounds like a stolen computer that's been locked by the owner.
-
My Macbook Pro tells me I need OS X 10.5 or higher to install essential software, but I already have Yosemite (10.10.1). What is going on?
This is it. Programming was done by idiots. People at schools IT department 20 or so full time positions know less then kids at Best Buy GeekSquad minimum wage part time, don't know or even want to call to find out. They just sit there and ask if the antivirus is upto date, I cant install your software that check the antivirus, "ITS NOT THE ANTIVIRUS". Three weeks and as always I have to find the fix myself. My god, why do I work for my money when I can just sit and collect it. Sorry for the rant.
This fix works and needs to be loaded on the campus network. -
I got a new macbook pro and now I need to know how to remove the prior owners itunes id from my computer?
If you purchased a computer from another person, you need to wipe it clean. To do this, click on the link - Erasing disks securely
Depending on your model Macbook Pro...
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable. -
I have the "Hanvon 5040 drawing tablet",it was working perfectly with mac till last month.As soon as i plug the USB of my tablet into my macbook pro the computer is blocked and an error apears: "you need to restart your computer..."nothing works.Any help?
Check with the manufacturer for updated drivers for your tablet.
-
How can I add icloud to macbook pro? Do I need to buy snow leopard & lion?
How can I add icloud to macbook pro? Do I need to buy snow leopard & lion?
Lion 10.7.2 is required for iCloud. Your computer must meet the requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply. -
Last week I purchase a new MacBook Pro. Do I need to pay for the new OS update?
Last week I purchase a new MacBook Pro. Do I need to pay for the new OS update?
Select your category and you can check with your serial number whether you are eligible or not.
Qualifying purchases between June 06, 2011 and July 20, 2011
http://www.apple.com/macosx/uptodate/ -
Whenever i try to update my macbook pro, it downloads then says I need to restart my computer. I restart the computer, and everything just freezes. When my computer eventually turns back on, its not updated. other apps i try to download dont download also
First, do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
When you complete the above re-download your OS X upgrade (not sure which one that is, but I assume Mavericks.) After the download is completed re-install it. Hopefully, this time it will do what you expect. -
HELP!!!
Here are the specs of my machine:
2011 13.3" MacBook Pro
4 GB Ram/320 GB HD
For the past several months my MacBook Pro refuses to shut down or restart without holding down the power button. Whenever I choose to restart or shut down the computer, it will hang on a grey screen. I have even tried letting it hang for an hour, and it still won't shut down. I notice that once in a while it will retart or shut down correctly if I had not used opened iTunes since turning it on. However, even manually closing iTunes before shutting down or restarting does not solve the problem. It seems as though it only shuts down if iTunes was not used since restarting the computer. Is this a registry error? Do I need to reinstall iTunes? I noticed this problem began happening after I uninstalled Kaspersky Virus Scanner, could that be the problem as well? Also, I cannot guarantee that the problem is only associated with iTunes. I just noticed that one of the few times it shut down or restarted correctly, iTunes coincidentally had not been used. Also, this problem started happening while I was still using Lion and has continued despite upgrading to Mountain Lion.
Also, whenever I update my iPod through iTunes, it won't eject properly, and a transparent icon of the iPod displays on the screen even after I have removed it from the USB port. Furthermore, the iPod will only be recognized by iTunes and will only be updated the first time I plug it in. After removing it and plugging it back in, it won't recognize or update the device unless I shut down and restart the computer. I have the latest addition of iTunes. I also have two iPods, one 80 GB Classic, and one 8 GB Nano, and I have the same problem with both.
I have AppleCare. Should I take my macbook to the genius bar?
Applications I normally use are Word, Safari, FireFox, iTunes, FinalDraft, Photo Booth, Notes, Mail, App Store, etc. No real heavy lifting.
Any feedback would be very much appreciated. :-)
Thank you everyone!!I have this question too.
Maybe you are looking for
-
Contact page and Version name question
When making a contact sheet, is it possible to just have the image number under each photo and NOT the words "Version Name"? Thanks.
-
Flash with CS3 - Mac - Importing Audio
Greetings, Creative Suite 3, OS-X (Possibly Leopard as well, it's dual-boot). We're working on our first few flash animations, nothing heavy or anything. Every time we try to import audio (MP3 or WAV), the computer tries for a while (shows the little
-
Why is the picture in my contact card different from the picture in my iMessages on my MacBook Air?
I just downloaded the iOS 8.0 on my iPhone 4s and i synced my mac with my phone. The picture in my iCloud account on my phone and on my Mac in my contact card are the same, but when I write a message from the Messages on my Mac, there is a different
-
Quick question, where to put global variables
Very quick question: where is the best place to put global variables, (e.g. a flag that turns on debug mode) if they are needed by the entire application? I'm guessing they should be placed in their own class. But should I make them public static fin
-
I tried syncing my iPhone to Mac and got this message when iPhoto pictures got synced: " this iPhone couldn't be synced. The requested file could not be found". Help what do I do now?