My MacBook Pro top cover flips open partially when kept in a vertical position.

The top cover of my MBP; brought in Sept 2012, flips open when kept in a verticla position. Like when you place it in a laptop bag. The local  Apple service center was not of much help. Have attached a snap of the MBP in the vertical position showing the top cover flip open. Can someone be of some help

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Similar Messages

  • Issue with MacBook Pro top cover

    The top cover of my MBP; brought in Sept 2012, flips open when kept in a verticla position. Like when you place it in a laptop bag. The local  Apple service center was not of much help. Have attached a snap of the MBP in the vertical position showing the top cover flip open. Can someone be of some help

    We do not have an Apple Store near our place (Bangalore; India). We only have retail outlets of Apple which provides both sales and service. My visit to one of these places did not help as the service engineer did not acknowledge this as an out of specification.
    Following this i wrote to Apple support, with a whole lot of videos and photos of the problems faced. Did not yield any concrete solutions. To me it appears to be a failure of the magnetic "lock" which holds the top cover in place. Pretty frustrating. Hope somone would help we resolve this issue. 

  • Macbook Pro Top cover has shifted positions

    Hi there,
    I was using my Macbook pro earlier today, my sister was angry and she threw her computer down on my bed, part of it hit my computer's screen, and I just noticed that my computer won't sit flat on a table (top left part is heavier now), this is because the impact caused the whole cover to shift slightly. This looks ugly and affects usage as my computer rocks up and down as I type. I am aware this will cost money to fix (I'm sure its just as easy as disassembling and reassembling), but I was wondering if anyone knew if I could do something myself to save some money, I have no experience with assembling or manipulating computers.
    Below I have some images of the damage
    http://img195.imageshack.us/i/img0025h.jpg/
    http://img694.imageshack.us/i/img0023u.jpg/
    The first image shows how the screen is not level when the lid is closed, and the second shows how the right part of my computer is fine, while the left is unbalanced.
    I appreciate whatever help I can get, thanks again
    -Gianpy

    Thanks for responding, there are no Apple repair centers here in South America...
    There are plenty of Apple-authorized service providers in South America:
    http://alacservice.apple.com/service/en/

  • Hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • After recent update to my macbook pro itunes will not open, it just bounces when I click on it

    fter recent update to my macbook pro itunes will not open, it just bounces when I click on it

    Means they are going to mess up your iPhoto Library pictures database  so it's unreadable by older versions of iPhoto on older OS X operating systems.
    You have the choice to right click on the iPhoto Lbrary and inside is a folder called Origianls, use the Finder to Duplicate this folder, then move the OriginalsCopy out of the iPhoto Library folder and save it elsewhere.
    I dont' think Apple will every intentionally touch the originals, however it's possible they could.

  • I've just installed mountain lion on my macbook pro. I cannot open preview and it is also stalling the log out sequence? How can I solve this

    I've just installed Mountain Lion on my Macbook pro and cannot now open Preview. I've partly solved the reading of PDF documents by installing Adobe Reader, but Preview is also stalling the log out process. Any suggestions how I might solve this annoying trait would be most appreciated. Many thanks.

    vidaiow wrote:
    Have just tried force quiting Preview via the Dock and reopening a file and it worked . Hurrah !. Thanks for your help.
    Just an FYI, normally you give the 'solved' award to the person who gave you the answer, not to yourself.

  • I tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just del

    i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high).  please help!!
    MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2

    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • I restored Pages from Time Machine to my MacBook Pro and I cannot open it.  How can I open it?

    I restored Pages from Time Machine to my MacBook Pro and I cannot open it.  How can I open it?

    You don't get all files you need from Time Machine. Do a reinstallation and updates from you iWork disc or if you bought from AppStore install from AppStore but then you have to uninstall first.

  • My MACBOOK PRO NEVER LETS ME OPEN AUTOTRADER AND WHEN I TRY TO OPEN IT GETS FROZEN AND IT FREEZES OTHER WINDOWS AS WELL. Please help me to sort this problem out asap. Thanks

    MY MACBOOK PRO NEVER LETS ME OPEN AUTOTRADER AND WHEN I TRY TO OPEN IT GETS FROZEN AND IT FREEZES OTHER WINDOWS AS WELL. Please help me to sort this problem out asap. Thanks

    To prevent this being accidentally activated in the future go to SystemPreferences>Keyboard>Keyboard Shortcuts>Universal Access and uncheck all the boxes.

  • MacBook Pro HD delay in opening files it takes 10 sec to access the HD Macintosh ?

    MacBook Pro HD delay in opening files it takes 10 sec to access the HD Macintosh ?
    When I click on HD I can't see files immediately ? It takes about 10 sec then files show up "on standby mode that is not happen!?"

    Hello Bulko,
    It may be that there is an issue with your hard drive. Running Disk Utility's Verify Disk (and Repair Disk as necessary) can help resolve many such issues.
    Using Disk Utility to verify or repair disks
    http://support.apple.com/kb/HT1782
    Cheers,
    Allen

  • MacBook Pro. Was Streaming radio. When came back to computer it appeared to have shut off. Now can't get it to respond in any way.

    MacBook Pro. Was Streaming radio. When came back to computer it appeared to have shut off. Now can't get it to respond in any way. Now that you can't remove the battery, I don't know how to get it to quit, although it doesn't appear to be making any noise, so might have quit on it's own.  Any ideas? Thanks!

    I honestly don't remember what it came with though I do remember having two drives so long ago.  Since then I've had to replace them with newer, faster ones, and just didn't really need a second drive.  I don't copy cds, I just need something to read DVDS (which the current one doesn't seem to want to do) and occasionally burn something.
    I bought the MacPro becuase I am a tireless multitasker, having super memory eating programs on at all times.  Right now I am working in Photoshop while watching a movie, with two P2P programs open, two chat programs and surfing the internet, with two monitors active so I can see everything.. I can't imagine the average pc doing this wthout blowing up   Mac Pros are the ultimate computer for those that like to do a lot at once.
    The speed and memory capacity of the Mac Pro make it the best computer hands down to handle a mind that can't be satisfied with doing just one thing at a time!
    And six years after buying it, it can still eat the average pc for breakfast  How's that for great?

  • 2012 macbook pro retina display artifacts on screen when using onboard video

    2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
    About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
    On top of that issue I also have had the ghosting issue.
    Anyone else have this problem?

    artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
    There are a few retina owners who have faulty gpus.

  • My macbook pro (2010 13inch) is really laggy when I'm using apps like iTunes and safari. the arrow on the screen seems to not respond and is laggy and when viewing videos it can be really laggy. I just want to know if it was a problem i could fix, thanks.

    My macbook pro (2010 13inch) is really laggy when I'm using apps like iTunes and safari. the arrow on the screen seems to not respond and is laggy and when viewing videos it can be really laggy. I just want to know if it was a problem i could fix, thanks.

    You might start with:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    If the above reveals nothing helpful, then create a new user account. Log out of your account and log into the new account. Do the problems cease?

  • I have lightroom 5.7 and a macbook pro 10.9.5.  Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work.  There is no "exclamation" icon below the histogram box in the Library

    I have lightroom 5.7 and a macbook pro 10.9.5.  Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work.  There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone.  What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

Maybe you are looking for

  • Trying to restore wireless printer hp officejet pro  8500 premier

    i have lost connection for some reason. I have used it wirelessly before.  I have updated my system and have not been wireless since then.....

  • Services in Trex 7.0

    Hi gurus. We have installed EP7.0 SP15 on one machine and Trex 7.0 on another machine. When we start the services in the Trex Monitor some of them like index, queue, and so on don´t start. Any body can help us?. Thanks in advance. Alfonso

  • Final Cut Pro to Compressor - the Void In Between

    So, basically, I am in love with FC Studio. However, one detail that has been absolutely frustrating has been the meltdowns experienced with exporting video directly from FCP 6 to Compressor 3. My office has multiple machines used for editing, and we

  • Developer Report 10g - How to generate directly a file ( pdf, html, text etc. )

    hi all gurus, this is my first ever post, I am new in the development area and facing a problem. I am using Developer 10g, calling report through a Form Module and want to Directly save in file name specified but failed. My code to call report mentio

  • SOAP 1.2 & PI 7.0

    Hi gurus, I have read: http://www.w3.org/Submission/wsdl11soap12/ http://schemas.xmlsoap.org/wsdl/soap12/wsdl11soap12.xsd /people/kevin.liu/blog/2006/04/12/wsdl-11-binding-extension-for-soap-12 These links show like implementing SOAP 1.2 with of WSDL