My MacBook pro turns on, shows my background, but does not launch finder. Help please.
When I turn on my MacBook Pro (2006, 15"), the background image shows up, but the finder does not launch. After about 10 minutes, my task bar will appear on the bottom of the screen, but the finder bar does not appear. The spinning wheel appears and will not go away. I have attempted rebooting a few times, and each time the result is the same.
Suggestions?
The folder with a question marks is usually an idication that the Mac can't find the system file to boot from.
Since you never told us which system your Mac was running there is nothing more to say.
Allan
Similar Messages
-
How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.
It has always been very basic to always maintain a backup copy of your computer.
Did you fail to back up your pics?
The photo sync is one way - comptuer to ipod.
You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality. -
New macbook pro connects to HP psc printer but does not print
Hi,
I have just got the new macbook pro model A5102 and i have followed the instructions on the HP website to install my HP psc 1317 all- in-one printer. I am using a USB connection, and I have followed the instructions, turning on printer, connecting via usb, checking for software updates. The printer queue is automatically made, and i go to printer and scanners and it is there in the list. I then go to print and nothing appears in the queue. I disconnect the printer and it goes offline so the connection via usb is working, its just not printing. I have also restarted the laptop and I have deleted and re-installed printer several times. I don't know if I am missing something out, so can somebody please help. Ive been to the HP website as I assumed I needed to download a driver but it does not give me the option.
Thanks,
MeeraHey ! I have the same problem with my HP PSC series, it finds my printer, I can print the stuff and my printer progress even says "Printing page ....", but just nothing comes out of my printer ...
My parents and sister all have an own laptop which is WIndows and they can all print with that USB cable.
I -
How do I uninstall a program that is running in the background but does not show in Force Quit?
Open Activity Monitor and look for the program. Select it and Quit or Force quit it from within Acitiviy Monitor.
Search for the application with Find Any File as it can search areas that Spotlight can't, like invisible folders, system folders and packages. You can drag the app and any associated files from the search result window to the Trash bin in the Dock.
OT -
My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,
Last login: Sun Apr 22 19:11:11 on ttys000
Marlons-MacBook-Pro:~ ryanmnhs$ ls -la ~/Library/LaunchAgents
total 40
drwx------ 7 ryanmnhs staff 238 5 Nov 23:09 .
drwx------@ 48 ryanmnhs staff 1632 13 Jan 09:53 ..
-rw-r--r-- 1 ryanmnhs staff 574 24 Oct 22:29 com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
-rw-r--r-- 1 ryanmnhs staff 618 22 Oct 2011 com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.BAF380D0-E780-4E82-86BF-77 2440AB4936.plist
-rw-r--r-- 1 ryanmnhs staff 895 4 Sep 2011 [email protected].plist
-rw-r--r-- 1 ryanmnhs staff 802 21 Mar 12:56 com.facebook.videochat.ryanmnhs.plist
-rw-r--r--@ 1 ryanmnhs staff 805 6 Sep 2011 com.google.keystone.agent.plist
Marlons-MacBook-Pro:~ ryanmnhs$
,,,,,,,,THIS IS THE RESULT,, WHAT DOES THIS MEAN? HOW CAN I FIX MY PROBLEM? UP TO THIS DATE MY WORD, EXCEL AND POWERPOINT STILL DONT WORK!!!!PLEASE HELP ME, ANYONE? THANK YOU... -
When I print to PDF using Acrobat 11 Pro from any application the acrobat Reader does not launch automatically. Associations are correct. Happens from Chrome, IE, Word, Excel, Powerpoint. Previously had deskPDF installed but uninstalled correctly. Can't find a preference setting for the auto launch. Thx for your help, Bruce
A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/
-
i am using windows xp profession sp3 os
when i open firefox it runs in background but does not open(see through task manager or one message "firefox is already running in background" when i again click the icon.)
if i disable the internet connection, immediately it opens. each and every time i do this when i start work. what kind of problem is this
== This happened ==
Every time Firefox opened
== i every time starts firefoxI had the same problem and it was because of my firewall settings, which I had set to block all activity and forgot to reset it.
-
Downloading a dmg file shows in activity but does not show in downloads folder
downloading a dmg file shows in activity but does not show in downloads folder
Maybe
iOS: Unable to import photos to computer
Did it show before?
If you connect to another PC does the iPod show up in My Computer?
Have you installed only camera or scanner programs on your computer? -
after I submit my book to the Apple store in I photo, it shows that it assembles and uploads, but does not finish the process. I cannot use the cancel button and have to force quit IPhoto to get out of the process.
Assuming you're referring to iPhoto on your Mac here are some potential fixes you can try:
1 -
Go to the System/Sharing preference pane and make sure Remote Apple Events is checked. If it is, uncheck it and then recheck and try ordering again.
2 -
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
3 -
Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
Note: Create a proof pdf file of the book as described in this Apple document, iPhoto, Aperture: Previewing an order in iPhoto or Aperture, before ordering the book and keep the pdf file to compare with the printed copy when it arrives. -
I am trying to transfer data from my MacBook Air 2011 to a "new" MacBook Pro 2013. Both are running Yosemite 10.10.2. Since Migration Assistant WOULD NOT WORK (the MacBook Air couldn't "see" the MacBook Pro), using my WiFi network, I transferred the necessary data to a 500GB drive and THEN to the MacBook Pro. However, two programs didn't transfer well - or at all! iTunes only transferred the Music (Media?) files, but not iTunes U, Podcasts, Audiobooks, etc. I have had to drill down into the storage files, retrieve the non-transferred files and add them, one by one - a most laborious task. But, this is nothing compared to the problem with iPhoto (9.6), which shows only 6 events and 4 Faces transferred, with the rest only place holders (black boxes and grey dotted squares) in all the folders in my iPhoto.
I "Showed Package Contents," and found the missing files - of which there are many! - and started adding them, again, one by one.
Can anyone tell me what happened to my iPhoto (Yosemite 10.10.2)? It's fine on my MacBook Air, but simply WON'T TRANSFER to my MacBook Pro?
PLEASE - someone tell me how to CORRECTLY transfer my iPhoto files and/or HOW TO MAKE THE MACBOOK AIR "SEE" THE MACBOOK PRO in Migration Assistant?Hello Mary,
Sorry to hear that you are having issues with moving your data over to your new Mac. There are a few alternatives that you can do to migrate that data if you are not seeing it in Migration Assistant. The first is make a Time Machine back up to that 500 Gb external hard drive and then use that in Migration Assistant to copy the entire data over. If you do that you will want to remove any data that you have on your MacBook Pro after the transfer completes as it will create another user with the data from the MacBook Air. Another option is to use a Thunderbolt Cable that you can purchase online if you want and use the option from another disk to copy that over. Take a look at the articles below for more details.
Mac Basics: Time Machine backs up your Mac
https://support.apple.com/en-us/HT201250
Move your data to a new Mac
https://support.apple.com/en-us/HT204350
Apple Thunderbolt Cable (2.0 m) - White
http://store.apple.com/us/product/MD861ZM/A/apple-thunderbolt-cable-20-m
Regards,
-Norm G. -
I just bought my macbook pro 2 weeks ago. I am new to apple so it is pretty much greek to me at this point but I have been able to figure out or google most of my questions. I have found a million posts about the Airplay feature for mirrioring and most of them are the same issue having a mac that is pre 2011. There should be no reason I would not have the Airplay option on my system.. I have done the updates avaliable for both the mac and the AppleTV unit, which is a Gen 2 or 3, Also brand new as of 2 weeks ago. Does anyone know what else I can do or is this something I will have to take in the the Apple Store to fix?
Welcome to Apple Communities
You're running Lion, and Mirroring is in Mountain Lion. http://www.apple.com/osx/uptodate -
Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format
I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward! -
Macbook Pro doesn't go into sleep mode when battery dies. Help Please!
When ever my Macbook Pro gets low on battery power I receive the "battery is low message" and instead of just going to sleep a couple minutes later it just shuts down completely. Any reason for this?? I want it to go to sleep like it used to when the battery gets low/dead.
here is my battery info!
Battery Information:
Model Information:
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 1526
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4557
Health Information:
Cycle count: 345
Condition: Normal
Battery Installed: Yes
Amperage (mA): 1583
Voltage (mV): 12083
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 90
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 60
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Thanks for any help!!Same exact issue on my MacBook Pro. It is brand a brand new model: MacBook Pro (June 2009), with Mac OS X 10.6.1 and "7 hour battery".
Model Information:
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0003
Hardware Revision: 0003
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 6515
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 6690
Health Information:
Cycle count: 27
Condition: Normal
Battery Installed: Yes
Amperage (mA): -936
Voltage (mV): 12311
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes -
I tried command R to get into recovery mode. My goal is to format the MBP drive, partition the drive and load Windows through Boot Camp. Disk Utility will not allow access to reformat the drive. Is there another access method to format the drive?
jjoside,
Snow Leopard (Mac OS X 10.6.8) does not come with Recovery mode; you’d need Lion (Mac OS X 10.7) or newer for that. If you’d like to reformat your internal disk and reïnstall Snow Leopard on it, you’ll need to boot from the white retail Snow Leopard DVD which was originally used to install Snow Leopard on your MacBook Pro. [Your 2006 MacBook Pro came from the factory with Tiger (Mac OS X 10.4.something) installed.] If you no longer have your white Snow Leopard DVD, you can purchase a replacement Snow Leopard DVD from Apple. -
MacBook Pro Retina says connected to ethernet, but will not connect
I have a MacBook Pro 13" Retina. It will not connect to my office's network no matter what I do. I've tried different cables, different ports, toggling wifi on and off, inspecting the ports to see if they will recognize other thunderbolt connections and they will. I was able to connect to a Thunderbolt monitor without any issues. It may be the adapter, but there are all kinds of funky-ness going on when I try to assess the network. The thunderbolt heading under System Information claims nothing is connected - even when communicating with the Thunderbolt display. The ethernet connection claims to be working, but will not connect to the internet. It also can't seem to find our router. I've tried to manually enter all the information in using the assistant, but it still can't find it. This is especially frustrating since this computer is under a year old. I can't take it to the Genius Bar because it is owned by my company and contains proprietary info. Any help would be greatly appreciated.
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Maybe you are looking for
-
How to transfer purchased apps from Mac to iPhone
Hello, I purchased some college apps on my mac book and I need to this programs on my iPhone too.I read all discussions about that and did everything but not success about that.My iTunes doesnt see the purchase programs on my computer. Thank You, Fur
-
Complex XSD in BPEL not able to initiate from BPEL console
Hi, The Problem I have a BPEL application where I need to produce an XML file in the format of an XSD supplied by an external agency. I can build and compile and deploy an appropriate application. When I come to the BPEL console and attempt to initia
-
Scheduling question for information broadcasting
I am confusing between 2 options In information broadcast. 1) executation at pre-defined time 2) direct scheduling at background processing I have no idea what is the different of each. I read the sap help but it still does not make clear to me
-
Where are the Linux kernel parameters?
I have successfully installed ORACLE on red hat linux 5.0 even though I didn't set the kernel parameters. On Solaris these parameters can be set in the /etc/system file. Where do you set SHMMAX and the kernel parameters in linux? I could not find a s
-
OID external authentication plugin for edirectory
How do I get more info on, or has anyone managed to, add a plugin to OID to enable external authetication to eDirectory? Please add insight to this, if you have this experience. Thanks